Toshiba Strata E Electronic Key Telephone System Installation And Maintenance Manual

TOSHIBA SYSTEM PRACTICES 
ELECTRONIC KEY TELEPHONE SYSTEM ’ 
Strata, 
OPERATING PROCEDURES 
SECTION 500-026-460 
_ JANUARY 1968 
OPERATING P OCEDURES 
l ‘-  

OPERATING PROCEDURES 
SECTION 500-026-400 
_ JANUARY 1988 
STRATAe 
OPERATING PROCEDURES 
TABLE OF CONTENTS 
SUBJECT 
ELECTRONIC TELEPHONE OPERATION PAGE 
GENERAL INFORMATION .............................................................. 1 
Single-Line Electronic Telephone ........................................ 
.+‘-. ......... 
2 
Button Descriptions.. .............................................................. 3 
LED Indications .......................................................................

urcnnlll~u rnubcuunm 
SECTION 
500-026-400 
JANUARY 1988 . 
)I 
TABLE of CONTENTS (cont.) 
SUBJECT PAGE . . 
Privacy/Non-Privacy ................................................................ 36 . 
Station Security ................................................................... 36 
Toll Restriction Override ............................................................ 37 
Tone/Pulse Sending ................................................................ 37 
CENTREX APPLICATION...

-4fata -___ 
adeasee-~---------.--- --- 
___. 
----U~tferti~elepkene ___~- 
--Referertee-Guide- ___--_-------..--.-- 
.-~ --__-.-- ______- 
..-~- ---___--____ 
GENERAL INFORMATION 
Your electronic telephone has been designed to provide easy 
access to the wide range of features offered by your telephone 
system. Each phone is equipped with a dial pad, 4, 14 or 24 
feature buttons, a speaker with volume control, and a handset. 
All the feature buttons are plainly marked as to their purpose. 
Four buttons...

GENERAL INFORMATION 
SINGLE-LINE 
ELECTRONIC TELEPHONE 
Your Single-Line electronic telephone is equipped with a blank 
single-line button/LED that functions as both an intercom (INT) 
and CO line button/LED. 
Features are accessed through the use of dial codes listed in this 
guide. To access the features that are allowed using the Single- 
Line electronic telephone, a dial code must be used instead of a 
feature button. A dial code must be available to allow the feature 
to function. For example, the...

GENERAL INFORMATION 
BUTTON DESCRIPTIONS (continued) 
DO,NOT DISTURB BUITON m 
Locks the individual station in or out of the Do Not Disturb mode. 
DOOR LOCK BUlTON 
q (l - 4) 
Controls a door lock mechanism. 
HOLD BUTTON m 
Holds outside calls. 
INTERCOM BUT-l-ON m 
Accesses an intercom line. 
MANUAL/AUTO BUTTON m 
Places the modem into manual or automatic answer mode. 
MESSAGE WAITING/FLASH BUlTON m 
MW: Indicates a message is waiting. 
FL: Disconnects and recalls dial tone on a CO line, or is used to...

TC3St-ilBA 
INFORMATION  GENERAL 
___-._ 
LED INDICATIONS 
CO INCOMING CALL 
Aslowflashrate(%-sec. on -l/2-sec. off)indicatestheCO/PBX 
line on which the call is coming in. 
CONFERENCE 
A very fast flash rate ( 10 impulses per second (IPS)) indicates the 
CO line presently in the Conference mode. Other stations’ LEDs 
also show same indication for that line. 
EXCLUSIVE HOLD 
A very fast flash rate (10 IPS) indicates the CO line is placed on 
Exclusive Hold. 
HOLD RECALL 
A quick flash rate matching the...

AUTOMATIC DIALING 
AUTOMATIC DIALING BUTTONS 
PROGRAMMAl3LE OPTION 
After accessing a CO line, automatic dialing for telephone 
number storage and use is available by depressing them button 
instead of a 2-digit access code. Each a button stores one 
telephone number (up to 16 digits).* 
TO STORE A TELEPHONE NUMBER** 
1) Do not lift the handset. 
2) Depress the a(or m) and a(or m) buttons, respectively. 
3) Depress the m button you wish to use. 
4) Dial the telephone number to be stored( 16 digits...

AUTOMATIC DIALING 
TELEPHONE NUMBER STORAGE (continued) 
TO STORE A TELEPHONE NUMBER IN STATION AUTO- 
MATIC DIALING MEMORY* 
Automatic dialing telephone numbers can be stored by each 
station. 
1) Do not lift the handset. 
2) Depress the 1 and 1 buttons, respectively. 
3) Dial a 2-digit automatic dialing code. 
l Station codes run consecutively from 10 - 49. 
4) Dial the telephone number to be stored (16 digits maximum).** 
5) Depress the a button to record the number in memory. 
6) Repeat the above...

CALL FUNCTIONS 
-__ 
AUTO BUSY REDIAL (ABR) 
Afrer reaching a busy outside nurnber, the system will automati- 
cally redial that number at programmed intervals. 
TO USE AUTO BUSY REDIAL 
1) Lift handset. 
2) Depress any available CO line and dial the telephone number. 
l Receive busy tone. 
3) Depress m button or m 11. 
l ABR LED blinks. 
4) Hang up. 
5) At programmed intervals (30/60 seconds), the system will 
redial the number (15 times maximum). 
6) 
l With each attempt, if busy, ABR will reset for...