Home
>
Toshiba
>
Communications System
>
Toshiba Strata Dk14, Dk40i, Dk424 Installation And Maintenance Manual
Toshiba Strata Dk14, Dk40i, Dk424 Installation And Maintenance Manual
Here you can view all the pages of manual Toshiba Strata Dk14, Dk40i, Dk424 Installation And Maintenance Manual. The Toshiba manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 241
DK40i/DK424 Universal Slot PCBs PDKU2 Digital Telephone Interface Unit Strata DK I&M 5/997-7 DK40i/DK424 Universal Slot PCBsPrograms 28 and 29: Digital Direct Station Selection Consoles (DDSS) assignments. Program *29: Enables ADMs on 2000-series digital telephones. Program 27: Adjusts initial off-hook volume level for digital telephone handsets. Programs 30, 31: Enables OCA. Programs 77-1, 77-2, 79, *79: Digital Door Phone/Lock Control Unit (DDCB) and door phone ringing assignments. Program 92-5:...
Page 242
DK40i/DK424 Universal Slot PCBs PDKU2 Digital Telephone Interface Unit 7-8Strata DK I&M 5/99 PEKU Electronic Telephone Interface Unit System:DK40i Expansion KSU, DK424 Circuits per PCB:eight electronic telephone circuits Interfaces with:electronic telephones HDSS console (circuits 7 and 8 only–each console requires two circuits) alternate BGM source (circuit 3 only) EOCU PCB for OCA external conference amplifier (circuits 2 and 3 only–ports 09 and 10, 17 and 18, 25 and 26, 33 and 34–each amplifier...
Page 243
DK40i/DK424 Universal Slot PCBs PDKU2 Digital Telephone Interface Unit Strata DK I&M 5/997-9 DK40i/DK424 Universal Slot PCBsPEKU Configuration to Support Door Phone/Lock Control Unit (HDCB) 1. Cut the W9 Door Phone jumper wire on the PEKU PCB. 2. Refer to “Door Phone (MDFB)” on Page 9-22 for HDCB, associated Door Phones (MDFBs) and door lock control installation procedures. Only circuit 5 of a PEKU associated with ports 004, 012, 020, and 028 can support HDCBs. PEKU Configuration to Support...
Page 244
DK40i/DK424 Universal Slot PCBs PDKU2 Digital Telephone Interface Unit 7-10Strata DK I&M 5/99 Table 7-2 PEKU Controls, Indicators, and Connectors Control/Indicator/ConnectorType of ComponentDescription Off-hook call announce P10 10-pin connectorInterface connector for optional Off-hook Call Announce subassembly connector (used with P20, P40, P50, and P60). Off-hook call announce P20 Used with P10, P40, P50, and P60. Off-hook call announce P40 Used with P10, P20, P50, and P60. Off-hook call announce...
Page 245
DK40i/DK424 Universal Slot PCBs PEPU2 External Page Interface Unit Strata DK I&M 5/997-11 DK40i/DK424 Universal Slot PCBsPEPU2 External Page Interface Unit System:DK40i Expansion KSU, DK424 Circuits per PCB:(see interfaces) Interfaces with:built-in paging amplifier or page speaker door lock control external amplifier control external paging 600 ohm (duplex) interface (one zone) MOH control night relay control Older Version(s):none The PEPU is similar to the PIOU2 and PIOUS2, but supports fewer...
Page 246
DK40i/DK424 Universal Slot PCBs PEPU2 External Page Interface Unit 7-12Strata DK I&M 5/99 Table 7-3 PEPU Controls, Indicators, and Connectors Control/Indicator/ConnectorType of ComponentDescription M/B make/break jumper plug P10 3-terminal jumper plugExternal page/door lock control relay make or break jumper plug. M/B make/break jumper plug P11 Night/hold relay make or break jumper plug. SPI/SPO internal/external amplifier switch SW42-position slide switchSelects built-in 3-watt amplifier (SPI)...
Page 247
DK40i/DK424 Universal Slot PCBs PEPU2 External Page Interface Unit Strata DK I&M 5/997-13 DK40i/DK424 Universal Slot PCBsPESU Standard/Electronic Telephone Interface Unit System:DK40i Expansion KSU, DK424 Circuits per PCB:two standard telephone or two-wire device circuits (circuits 1,2)/ four electronic telephone circuits (circuits 5~8) Interfaces with:standard telephone circuits standard telephones voice mail ports off-premises stations alternate BGM source auto attendant digital announcer...
Page 248
DK40i/DK424 Universal Slot PCBs PEPU2 External Page Interface Unit 7-14Strata DK I&M 5/99 4. See “PDIU-DI Installation into 1000-series Digital Telephone” on Page 9-9 for procedures to add required speaker OCA upgrade to electronic telephones. External Options NoteRefer to Chapter 9 – Station Apparatus to connect electronic telephones (including the following upgrades: HVSU2 or HVSU/HVSI for Off-hook Call Announce and HHEU for headset and/or Loud Ringing Bell interface), standard telephones, and...
Page 249
DK40i/DK424 Universal Slot PCBs PEPU2 External Page Interface Unit Strata DK I&M 5/997-15 DK40i/DK424 Universal Slot PCBsPESU Programming Enter Code 25 in Program 03 for a non-optioned PESU or Code 26 for a PESU supporting Off- hook Call Announce. To program the PESU standard telephone ports, see “PESU Programming” on Page 7-15. To program the PESU electronic telephone ports, see “PESU Programming” on Page 7-15. If there are no PESU options, skip Program 03 and run Program 91 instead. Table 7-4...
Page 250
DK40i/DK424 Universal Slot PCBs PEPU2 External Page Interface Unit 7-16Strata DK I&M 5/99 Up PESU P60 P50 P40 W9 P10 P20 ESTS P70 P80Optional EOCU, Equip. for OCA Feature Backplane Connector ESTS: Standard Telephone Interface, Always Equipped From Factory Ring Voltage Option (Ports 1 & 2): L = Low Level (130V P-P) H = High Level (190V P-P) 50-Pin Amphenol Connector (Female) P90 LH Note Connect two ringers maximum per port (H or L). Cut W9 for Door Phone Option (HDCB on Circuit 5) PESU W7Cut W7...