Toshiba Strata Dk Digital Telephone User Guide

LCD Operation
Messages
Strata DK Digital Telephone   6/00109
➤To receive a notification message
➤
Press 

. 3. Press 

.
4. Dial the originating 
[PDN].
This can be your number or 
another station number.
5. Press 
.
6. Enter the message 
number (station 
#!6#8; system, 
&!688).
The LCD displays the 
message. In this example, 
system message 60 was 
entered. (This assumes the 
message is already stored in 
memory.)
7. Press 
.
8. Press 

	.
9. Press 
!.At the destination station, the 
LCD...

LCD Operation
Messages
110Strata DK Digital Telephone   6/00
➤To cancel the message from the telephone that set the message
➤
Press [PDN] and dial & ===, where XXX is the [PDN] of the telephone that 
set the message.
Silent Messaging (Busy Station)
An audible tone and an LCD message can be sent to an LCD station that is busy. The 
busy station can return a message to the calling station’s LCD. The two stations may 
continue this procedure to carry on a “silent” conversation. Soft Keys must be OFF 
(

...

LCD Operation
Memos
Strata DK Digital Telephone   6/00111
➤To return to a busy station message after receiving a busy station message
Memos
Speed Dial Memos
You can store names (12 characters max.) for each of 40 station speed dial numbers. 
The memo pad of names can be scrolled to select the appropriate party. The station 
must be enabled via system programming for LCD message memory.
➤To program Speed Dial names and numbers
1. Press 
	 + .
2. Enter the message 
number.
Station message (10~19) and...

LCD Operation
Memos
112Strata DK Digital Telephone   6/00
➤To display the Speed Dial number and memo
➤
Press 
	 + 1=6=, where X~X is the speed dial number to be displayed.
➤To dial a Speed Dial number
4. Enter the name or 
memo (12 characters 
maximum).The name appears on the bottom line as you enter it. 
(See “To enter LCD characters” on Page 102.)
5. Press 
	.
6. Enter a phone number 
(16 characters 
maximum).
The number displays on the top line as you enter it.
7. Press 	 to 
record data in...

LCD Operation
Name/Number Display
Strata DK Digital Telephone   6/00113
➤To check a speed dial number
Timed Reminders
See “Timed Reminders” on Page 78.
Name/Number Display
This feature enables you to enter a name/title, telephone number, location, etc. in 
system memory. This name/title (e.g., LOBBY) displays on your station’s LCD while 
it is idle, and on other stations’ LCDs when you call them or they call you. 
Name display information for non-LCD telephones or voice mail/auto attendant 
devices may...

LCD Operation
Name/Number Display
114Strata DK Digital Telephone   6/00
➤To enter name/number information
➤To clear name/number display
1. Press [DN] + &#.
2. Enter the new 
information (up to 16 
characters, e.g., user 
name and station 
number). See “To  
enter LCD 
characters” on Page 
102.
 
3. Press .The information is stored and 
appears on the top line of your 
station’s LCD. 
When you call a station, the 
name/title displays on the 
bottom of the called station’s 
LCD.
1. Press [DN] + 
&!....

LCD Operation
Name/Number Display
Strata DK Digital Telephone   6/00115
➤To erase name/number displayAfter clear: A name is 
displaced by message and call 
forward settings if they are 
set.
NoteThis procedure does not erase the name/
number. To restore the display, press [DN] + 
&#.
1. Press [DN] + 
&#.
Current information displays 
on the lower line of the LCD.
2. Press # in the alpha 
mode to enter blanks.Blank characters replace the information.
3. Press .The information is erased and the [PDN]...

LCD Operation
Name/Number Display
116Strata DK Digital Telephone   6/00 

Strata DK Digital Telephone   6/00117
Full-duplex Speakerphone4
This chapter explains how to use the Full-duplex Digital Speakerphone 
(DKT2020-FDSP).
The DKT2020-FDSP is designed to allow both parties of a speakerphone call to speak 
simultaneously. This eliminates “clipping” and enables true two-way conversation. 
However, when two parties are talking simultaneously, the performance is not as good 
as on a handset. The technology necessitates some volume loss in this situation.
An optional External...

Full-duplex Speakerphone
Dip Switches
118Strata DK Digital Telephone   6/00
Important!
The DKT2020-FDSP’s full-duplex operation depends on the speaker volume setting. 
Raising or lowering speaker volume directly affects the performance of the full-duplex 
operation.

Depending on the room’s echo characteristics, raising the volume of the 
speakerphone can cause the full-duplex operation to deteriorate. When set to 
maximum volume, it may be necessary to switch to half-duplex operation.

The speakerphone...