Toshiba Strata Ctx Dkt/Ipt Telephone User Guide

Strata CTX DKT/IPT Telephone     04/0387
Button LabelsB
All Flexible Buttons must be programmed for your telephone in system programming 
and vary for individual telephones. If a button does not appear on your display or 
telephone keystrip label, see your CTX System Administrator for button assignments.
The button labels in Ta b l e  1 3 are for the Programmable Buttons on your telephone. 
Programmable buttons are the unmarked buttons on your keystrip.
Table 13 Feature Button Definitions...

Button Labels
Delayed Ringing
88Strata CTX DKT/IPT Telephone     04/03
&DOO)UZG
1R$QVZHUCall Forward-No Answer – Press to forward calls to another station or voice mail device 
when your station is not answered after 8~60 seconds (set at your station).
&DOO)UZG
([WHU QDOCall Forward-External – Press to forward Private or DID line calls to an external or 
internal telephone number.
&DOOHU,Caller ID – Press to view the Call History list (may include name/number, date, status).
LUHFWHG
3LFNXSCall...

Button Labels
Delayed Ringing
Strata CTX DKT/IPT Telephone     04/0389
3URJUDP
Program – Press to enter User Programming mode, which enables you to re-define 
Flexible Buttons to perform other functions, including programming One Touch and 
Flexible Buttons, register Call Forward assignments, assign Message Waiting Keys 
and assign BGM sources played over the telephone speaker.
365(6Pause/Resume – Press to pause or resume recording a conversation to a voice 
mailbox or when playing back the recording....

Button Labels
Delayed Ringing
90Strata CTX DKT/IPT Telephone     04/03 

Strata CTX DKT/IPT Telephone     04/0391
IPT1020-SD SettingsC
This chapter explains how to enter data for your IPT102-SD telephone if it was not 
previously entered by the telephone installer or if you need to change this information.
You may also need to ask your Telephone System Administrator for the information 
required for the following steps (IP address, subnet mask number, router address, 
Station ID, CTX Strata Net node number, IP address for the BIPU-M1A, etc.).
Notes
You may want to enter a...

IPT1020-SD Settings
Initializing the IPT1020-SD
92Strata CTX DKT/IPT Telephone     04/03
Initializing the IPT1020-SD
CAUTION!If you initialize the IP telephone, all settings return to default.
1. Press 
++++!	 (simultaneously).
2. Press 
$ 
 .
3. Press 
 to initialize the telephone’s function settings (LED On = initialize, 
LED Off = don’t initialize). See “IPT1020-SD Function Settings” on page 95 for 
details.
4. Press 
+ to initialize the telephone’s IP network connection settings (LED On =...

IPT1020-SD Settings
IPT-to-IP Network Connection Instructions
Strata CTX DKT/IPT Telephone     04/0393
7. Press . Enter a Station ID for the IPT and press #
. This is usually your 
telephone’s primary number (PDN).
8. Press 
 to enter the CTX Strata Net node number of the CTX node that contains 
the BIPU-M1A to which this IPT interfaces, then press 
#
. This FB setting is 
for CTX networked systems only.
9. Press 
 for BIPU IP address mode. Press one of the following:
: manual setting, then...

IPT1020-SD Settings
IPT-to-IP Network Connection Instructions
94Strata CTX DKT/IPT Telephone     04/03
3. IPT 
searches 
for BIPU.Retries every 10 seconds.
Possible errors:
BIPU is not 
found “time 
out.”
BIPU is not 
found (Station 
ID automatic 
setting).
BIPU is not 
found 
(StationID 
manual setting)
Multicast 
address is 
not 
registered (BIPU IP address setting mode is 
automatic setting by multicast)
BIPU IP 
address is not 
registered 
(BIPU IP address setting mode is manual 
setting.
4....

IPT1020-SD Settings
IPT1020-SD Function Settings
Strata CTX DKT/IPT Telephone     04/0395
IPT1020-SD Function Settings
These steps enable you to turn On/Off button beeps, room noise cancellation, handset 
Busy Override, and headset volume control. You can also adjust the setting for carbon 
headsets vs. non-carbon headsets. 
1. Press 
++++#
 (simultaneously).
2. Press 
 then #
.
3. Press the Feature Buttons to turn the LEDs On/Off for the desired function setting 
(see Table 14).
4. Press 
#
 to...

IPT1020-SD Settings
Setting the IPT1020-SD Headset Transmit Volume
96Strata CTX DKT/IPT Telephone     04/03
Setting the IPT1020-SD Headset Transmit 
Vo l u m e
1. Press ++++
 (simultaneously).
2. Press 

.
3. Press the Feature Buttons to turn the LEDs On/Off for the desired volume 
transmission level (see Ta b l e  1 5).
4. Press FB4 for handset voice output in speakerphone mode (LED On = with, LED 
Off = without).
5. Press 
#
 to set the above data.
6. Go off-hook and hang up. 
Viewing IPT1020-SD...