Toshiba Satellite L450 L450d Pro Maintanance Manual

Error! Style not defined. Error! Style not defined.   4 Replacement Procedures  
4.9  Logic Upper Assembly 
Removing the Logic Upper Assembly 
Remove the logic upper assembly according to the following procedures and Figure 4.13 and 
4.14. 
1. Turn the laptop upside down and remove the following 19 screws: 
  Sixteen M2.5x10 screws 
   Three M2.5x3 screws 
 
M2.5×3*3 
 
M2.5×10*16 
Figure 4.13 Removing the screws from the bottom of the laptop 
Satellite L450/Pro L450/L450D/Pro L450D Maintenance Manual...

4 Replacement Procedures Error! Style not defined. Error! Style not defined.   
2. Turn to the front and remove five M2.5x10 screws  and detach four cables as indicated in 
the Figure 4.14.  
M2.5×10*5 
 
 
Figure 4.14 Removing five screws from the laptop and detach four cables.\
 
3.  Lift up the logic upper assembly. 
 
Installing the Logic Upper Assembly 
Install the logic upper assembly according to the following procedures.  1. Seat the logic upper assembly to the front of the laptop, and adjust to...

Error! Style not defined. Error! Style not defined.   4 Replacement Procedures  
4.10 Power Board 
Removing the Power Board 
Remove the power board according to the following procedures and Figure 4.1\
5.  
1. Remove one M2.5x4 screw from the power board. 
2.  Separate the power board from the logic upper assembly. 
 
M2.5×4*1 
 
Figure 4.15 Removing the power board 
 
Installing the power switch board 
Install the power switch according to the following procedures.  
1. Seat the power board in the...

4 Replacement Procedures Error! Style not defined. Error! Style not defined.   
4.11 Speakers  
Removing the Speakers 
Remove the Speakers according to the following procedures and Figure 4.16. \
1. Remove four M2.5x4 screws from the left and right speaker. 
2.  Remove the left and right speakers from the logic upper assembly. 
 
M2.5×4*4 
 
Figure 4.16 Removing the speakers  
 
Installing the Speakers 
Install the speakers according to the following procedures. 
1. Seat the left and right speaker in...

Error! Style not defined. Error! Style not defined.   4 Replacement Procedures  
4.12 Touch Pad Bracket  
Removing the Touch Pad Bracket 
Remove the touch pad bracket according to the following procedures and Figu\
re 4.17. 
1. Remove three M2x4 screws from the pouch pad bracket. 
  M2×4*3 
 
Figure 4.17 Removing the screws from the touch pad bracket 
 
2. Push the touch pad bracket upward to remove it. 
 
Installing the Touch Pad Bracket 
Install the touch pad bracket according to the following...

4 Replacement Procedures Error! Style not defined. Error! Style not defined.   
4.13 Thermal Fan 
Removing the Thermal Fan 
Remove the thermal fan according to the following procedures and Figure 4.18. 
1. Detach the cable from the motherboard. 
2.  Remove one M2.5x5 screw from the thermal fan. 
3.  Remove the thermal fan from the logic lower assembly. 
  M2.5×5*1 
 
Figure 4.18 Removing the thermal fan from the logic lower assembly 
 
Installing the Thermal Fan 
Install the thermal fan according to the...

Error! Style not defined. Error! Style not defined.   4 Replacement Procedures  
4.14 Motherboard 
Removing the Motherboard 
Remove the motherboard according to the following procedures. 
1. Remove one M2.5x4 screw and detach three cables from the logic lower assembly as 
indicated by arrows in Figure 4.19. 
  M2.5×4*1 
 
Figure 4.19 Removing motherboard from logic lower assembly 
Satellite L450/Pro L450/L450D/Pro L450D Maintenance Manual  4-29  

4 Replacement Procedures Error! Style not defined. Error! Style not defined.   
2. Remove the DC_IN CONN and pull it out of the routing channel, as shown in F\
igure 4.20. 
 
Figure 4.20 Removing the DC_IN 
3.  Use left hand to hold down the lower part of the motherboard and right hand to pick the 
motherboard up. 
 
Figure 4.21 Picking up the motherboard 
4.  Remove the motherboard from the logic lower assembly. 
Satellite L450/Pro L450/L450D/Pro L450D Maintenance Manual  4-30  

Error! Style not defined. Error! Style not defined.   4 Replacement Procedures  
Installing the Motherboard 
Install the motherboard according to the following procedures. 
1. Before seat the motherboard on the logic lower assembly, pull out the USB FFC to avoid 
being pressed. 
2.  Align the VGA CONN and RJ45 CONN to the holes in the logic lower assembly as shown in 
Figure 4.22. 
 
Figure 4.22 Align the VGA CONN and RJ45 CONN 
3.  Align the Audio CONN to the holes in the logic lower assembly and push...

4 Replacement Procedures Error! Style not defined. Error! Style not defined.   
 
Figure 4.24 Installing the DC-in jack 
5.  Secure one M2.5x4 screw. 
6.  Attach three cables to the motherboard as indicated by arrows in Figure 4.19. 
Satellite L450/Pro L450/L450D/Pro L450D Maintenance Manual  4-32