Toshiba Satellite L300 L305 Maintenance Manual
Have a look at the manual Toshiba Satellite L300 L305 Maintenance Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 566 Toshiba manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
3 Diagnostic Programs 3.10 Peripheral Subtest 09 Direct Color Test This test item is to check the video adap ter’s composing ability of direct color in high and true color mode. In the test, user is required to respond according to the instruction in the screen. Subtest 10 DAC/Palette Address This test item is to check the function of DAC registers and Palette registers. In the test, user is required to respond according to the instruction in the screen. 52 Satellite L300D,Satellite Pro L300, EQUIUM L300,SATEGO L300 Mai ntenance Manual
3.10 Peripheral 3 Diagnostic Programs NOTE 1:AMD platform can’t support this item Subtest 11 BitBlt Engine Test This test item is to check whether the BitBlt engine works normally. BitBlt is the abbreviation of ‘Bit Block Translate’, that means the copy of data block for 3 types, from video memory to video memory, from video memory to system memory, and from system memory to video memory. What should be done is to write the data of the type of BitB LT operation and the location of BitBLT source area and destina tion area into the BitBLT registers, and all those operations will be completed automatically by BitBLT engine with minimum CPU intervention. Satellite L300D,Satellite Pro L300, EQUIUM L300,SATEGO L300 Mai ntenance Manual 53
3 Diagnostic Programs 3.10 Peripheral NOTE 1:AMD platform can’t support this Test item 54 Satellite L300D,Satellite Pro L300, EQUIUM L300,SATEGO L300 Mai ntenance Manual
3.10 Peripheral 3 Diagnostic Programs Satellite L300D,Satellite Pro L300, EQUIUM L300,SATEGO L300 Mai ntenance Manual 55 3.9 Communication (COMM) Subtest 01 LAN Card This test item is to check whether the module can detect the existence of the network card and display its related information. 1. Device ID Detection Detect the device ID of the network card. 2. Vendor ID Detection Detect the vendor ID of the network card. 3. MAC Address Detection Detect the MAC address of the network card.
3 Diagnostic Programs 3.10 Peripheral 3.10 Peripheral Subtest 01 Keyboard This test item is to check wh ether the keyboard works normally. 1. Keyboard Data Line Test Check whether the keyboard data line works normally. 2. Keyboard Clock Line Test Check whether the keyboard clock line works normally. Subtest 02 Mouse Test Check whether the point devices work normally. 1. Touch Pad Before test Touch Pad’s f unction, user should set a timeout time at below screen: At the below screen of Touch Pad test, us er can press the left button, right button, and move the mouse to verify its functions for times, and the te st will end either by user break or test time is out. 56 Satellite L300D,Satellite Pro L300, EQUIUM L300,SATEGO L300 Mai ntenance Manual
3.10 Peripheral 3 Diagnostic Programs Subtest 03 Led Test 1. Led Test Check whether the Device led works normally. NOTE 1:If The Machine is AMD Pl atform, The HDD LED is very Dim Satellite L300D,Satellite Pro L300, EQUIUM L300,SATEGO L300 Mai ntenance Manual 57
3 Diagnostic Programs 3.11Error Codes and Description 58 Satellite L300D,Satellite Pro L300, EQUIUM L300,SATEGO L300 Mai ntenance Manual 3.11 Error Codes and description The format of ‘Error Code’ is ‘ddxxee’, and ‘dd’ is the device ID (1~2 chars), ‘xx’ is test function ID of device (2 chars), ‘ee’ is th e error code of device (2 chars); th e range of error code is from 01 to 99 in each device (the common error codes in all device are set to 99 and spanned). Device Error Code Description Cause Action ddxx ee Common Error 94 Interactive Mode Needed The test is not under interactive mode. Check whether the interactive test mode is adopted. 01xx CPU 01 CPU General Function Error The CPU General Function register is damaged. Replace the CPU. 02 CPU Arithmetic Error The CPU Arithmetic Register is damaged. As above. 03 CPU Logic Error The CPU Logic Register is damaged. As above. 04 CPU Type Error The CPU Type is not supportable. Check whether the CPU is Intel CPU. 05 CPU Speed Error The CPU speed differs from the expected value. Check the CPU speed and the set expected speed. 06 NPU General Function Error The NPU arithmetic unit is damaged. Replace the CPU. 07 NPU Interrupt Error The NPU is damaged. As above. 08 CPU Information Error Information of the CPU cannot be acquired. Check whether the CPU is Intel CPU. 09 Protected Instruction ErrorThe CPU is damaged. Replace the CPU. 21 MMX Test Error The CPU MMX register is damaged. Replace the CPU. 02xx Memory 01 Read Error The ROM BIOS has Physical problems. Test this unit on multiple machines. 02 Write-Protect Error The ROM BIOS has Physical problems. As above. 03 Base Memory Error Address The test pattern read out from the base memory is different from the one that has been written in this address. Test this memory chip on multiple machines.
3.11Error Codes and Description 3 Diagnostic Programs Satellite L300D,Satellite Pro L300, EQUIUM L300,SATEGO L300 Mai ntenance Manual 59 04 (XMS)Memory Problem The test pattern read out from the extension memory is different from the one that has been written in this address. As above. 05 (XMS) Out Of Range Wrong parameters setup. Check and reset the parameters. 06 Address Test Error Interference between different address channels. Test this memory chip on multiple machines. 07 Toggle Bit Error Errors with the timer chip. As above. 08 Interval Error The acquired refreshing frequency is out of the estimated range. Reset the estimated range. 09 L1 Cache test Error The pattern read out from the L1 Cache is different from the one that has been written in the same address. Test this unit on multiple machines. 12 Data Bus Error Interference between different data channels. As above. 14 Speed Error Failure during the transfer speed test. As above. 03xx Board 01 DMA Test Error DMA channel cannot transfer data normally. Repeat multiple times. Whether there is always the same error, replace the board. 04 Interval Timer Error The difference between the actual precision of the interval timer and its theory value is out of the permitted range. The timer counts imprecisely. As above. 05 Periodic Faster Error The frequency is beyond the standard. As above. 06 Periodic Slower Error The frequency is below the standard. As above. 07 Update-ended Interrupt Error R/W errors with the RTC refreshing interrupt controller. As above. 08 RTC Alarm Error The PC speakers sound source -- -counter/timer 8253 cannot produce corresponding timing signal. As above. 13 PCI Bus Error No PCI. Check the board. 14 PCI Bus Scan Error PCI test fails. As above. 15 PCI Device Access Error PCI access fails. As above. 16 PCI Config Verification Error Wrong PCI configuration. Check PCI configuration on main board or PCI Device
3 Diagnostic Programs 3.11Error Codes and Description 60 Satellite L300D,Satellite Pro L300, EQUIUM L300,SATEGO L300 Mai ntenance Manual configuration. 17 PCI to ISA Bridge Error PCI-ISA bridge errors. Repeat multiple times. If there is always the same error, replace the board. 18 ESCD Error ESCD errors. As above. 53 ACPI Table Test Error Errors with the ACPI table test. As above. 34xx FAN 01 Fan Slow Speed Test Fail The fan slow speed test fails. Check the FAN connection. 02 Fan Stop Test Fail The fan stop test fails. As above. 03 Fan Fast Speed Test Fail The fan fast speed test fails. As above. 04xx Video 01 Text Attribute Error Physical problems with the video card. Check whether there is any physical problem with the video card. 02 Text Page Selection ErrorAs above. As above. 03 Text Color Error As above. As above. 04 Text Mode Error As above. As above. 05 VGA Mode Error 1) Physical problems with the video card. 2) Physical problems with the monitor. 1) Check whether there is any physical problem with the video card. 2) Check whether there is any physical problem with the monitor. 06 Character Test Error Physical problems with the video card. Check whether there is any physical problem with the video card. 07 DAC/Palette Address Test Error As above. As above. 08 Color Purity Test Error Physical problems with the video card or the monitor. Check whether there is any physical problem with the video card or the monitor. 09 VESA Mode 15bits Direct Color Test Error As above. As above. 10 VESA Mode 16bits Direct Color Test Error As above. As above. 11 VESA Mode 24bits Direct Color Test Error As above. As above. 12 Get the PCX graphics map Error Failure in getting PCX graphics map. Check for the PCX graphics map. 13 Bitblt Engine Test Error Physical problems with the video card. Check and see whether the video card has any physical problem. 14 VESA Video Memory Test Error As above. As above.
3.11Error Codes and Description 3 Diagnostic Programs Satellite L300D,Satellite Pro L300, EQUIUM L300,SATEGO L300 Mai ntenance Manual 61 15 VESA VRAM Test Error Physical problems with the video card or the monitor. Check whether there is any physical problem with the video card or the monitor. 16 AGP Test Error AGP configuration register errors. Check and see whether the AGP video card has any physical problem. 17 LCD Panel Test Error Lower LCD color resolution. Replace the LCD. 19 Register Test Error Physical problems with the video card. Check and see whether the video card has any physical problem. 20 Adapter not support DDCThe video card doesnt support DDC. 21 Monitor not support DDCThe monitor doesnt support DDC. 21 8bits Text and Attribute Test Error 1) Physical problems with the video card. 2) Physical problems with the monitor. 1) Check and see whether the video card has any physical problem. 2) Check and see whether the monitor has any physical problem. 26 8bits Video Mode Test Error As above. As above. 27 15bits Video Mode Test Error As above. As above. 28 16bits Video Mode Test Error As above. As above. 29 24bits Video Mode Test Error As above. As above. 30 32bits Video Mode Test Error As above. As above. 31xx Audio 01 Audio Play Fail Cannot play music. Check the Audio connection, replace the external fixture, and repeat the test. 02 Record Fail Cannot record. As above. 08xx LAN Card 01 PCI bus Error during device ID test Don’t Scan PCI device Don’t support PCI BIOS 02 PCI Ethernet card not present during device ID test Don’t find Net card Please insert Net cad 03 Intel PCI Ethernet card not present during MAC test Don’t found Net Card, This Card can’t be Read MAC by this method Please update net card or use other method 09xx Keyboard