Toshiba Satellite C55-b Manual

2. Plug one end of the cable into the LAN jack. Press gently until youhear the latch click into place. Figure 4-5 Connecting the LAN cable1. LAN jack2. LAN cable
3. Plug the other end of the cable into a LAN hub connector or router.
Check with your LAN administrator and hardware or software vendorbefore using or configuring a network connection.
Memory media The computer is equipped with a memory media slot that canaccommodate some kinds of memory media with various memory
capacities so that you can...

Points to note about the memory media cardSD/SDHC/SDXC memory cards comply with SDMI (Secure Digital MusicInitiative), which is a technology adopted to prevent unlawful copy or
playback of digital music. For this reason, you cannot copy or playback
protected material on another computer or other device, and you may not
reproduce any copyrighted material except for your personal enjoyment.
Below is a simple explanation for distinguishing SD memory cards from SDHC memory cards and SDXC memory cards.
SD,...

The card is designed so that it can be inserted only one way. Do nottry to force the card into the slot.
Do not leave a card partially inserted in the slot. Press the card untilyou hear it click into place.
Set the write-protect switch to the lock position, if you do not want to
record data.
Memory cards have a limited lifespan, so it is important to backup
important data.
Do not write to a card if the battery power is low. Low power could
affect writing accuracy.
Do not remove a card while read/write is...

3. Press the memory media gently to ensure a firm connection is made.The memory media will be partially out of the slot.
Figure 4-7 Inserting memory media1. Memory media slot*2. Memory media
* One Memory media slot is provided either on the front or on the left side of
your computer.
Product appearance depends on the model you purchased.
Make sure the memory media is oriented properly before you insert it.
If you insert the media in wrong direction, you may not be able toremove it.
When inserting the...

External DisplayYour computer video capabilities can be enhanced with additional displays.External displays allows you to share your desktop or extend the desktoparea.
Connecting an external display Your computer comes with a built-in display, but you can also connectother external displays via available ports on the computer.Some models may include the Triple Monitor function that can display
image on Triple Monitor independently.
As the port operation of all external display devices have not been...

The HDMI out port
HDMI (High-Definition Multimedia Interface) port digitally transfers bothvideo and audio data without reducing the quality. HDMI-compatible external display devices including televisions can be connected via theHDMI port.
Some models can support ultra high definition (3840 x 2160 pixels) display
on compatible external display devices via HDMI output port. To use this
function, you must purchase an HDMI cable (corresponding to 3840x2160
pixels or higher).
To connect an HDMI-compatible...

same device as the display output device, please adjust the playbackdevice manually by the following steps:
1. Click  Start -> Control Panel -> Hardware and Sound -> Sound .
2. In the  Playback  tab, select the playback device which you want to
switch to.
3. To use the internal speakers on your computer, select  Speakers. To use
the television or the external monitor that you have connected to the computer, select a different playback device.
4. Click the  Set Default button.
5. Click  OK to close the...

one end of the security cable, while the other end attaches to a desk or
similar object. The methods used for attaching security cables differ from
product to product. Please refer to the instructions for the product you are
using for more information.
Connecting the security lock In order to connect a security cable to the computer, follow the steps as
detailed below:
1. Turn the computer so its right side faces you.
2. Align the security cable with the lock slot and secure it in place.
Figure 4-10...

To adjust the volume level of speakers or headphones, move the
Speakers  slider.
To adjust the volume level of an application that you are using, move
the slider for the corresponding application.
Microphone Level Follow the steps below to change the microphone recording level.1. Right click on the speaker icon on the Windows Taskbar, and select Recording devices  from the sub menu.
2. Select  Microphone , and click Properties .
3. On the  Levels tab move the  Microphone slider to increase or
decrease...

Video modeVideo mode settings are configured via the  Screen Resolution dialog.
To open the  Screen Resolution  dialog, click Start -> Control Panel ->
Appearance and Personalization -> Display -> Change display  settings .If you are running some applications (for example a 3D application or video
playback), you may see some disturbance, flickering or frame dropping on
your screen.
If that occurs, adjust the resolution of display, lowering it until the screen is
displayed properly.User's Manual 4-33