Toshiba Satellite 2430 2435 Manual

							31
Finding Your Way Around
Back
5.375 x 8.375 ver 2.3
The RGB (monitor) port lets you connect an external 
monitor.
The parallel port lets you connect a parallel printer or other 
parallel device, including ECP-compatible devices. 
The modem port lets you use a standard RJ-11 telephone 
cable to connect the modem directly to a standard telephone 
line. For more information, see “Connecting the modem to a 
phone line” on page 86. 
The Network port (RJ-45 jack) provides access to a Local 
Area Network (LAN) using a standard Ethernet
® network 
cable.
The USB (Universal Serial Bus) ports allow you to connect 
USB peripherals to your computer.
DEFINITION: USB is a peripheral expansion standard that 
supports a data-transfer rate of up to 480 Mbps for peripherals 
such as keyboards, pointing devices, and monitors. USB 
peripherals have a single standard for cabling and connectors. The 
USB standard allows hot swapping of peripherals.
The cooling vent prevents the computer’s central processing 
unit (CPU) from overheating so that it can continue to 
perform at maximum speed. 
CAUTION: To prevent possible overheating of the CPU, do not 
block the cooling vents.
EtherEther 
						

							32
Finding Your Way Around
Right side
5.375 x 8.375 ver 2.3
Right side
The two stacked PC Card slots support up to two Type I or 
Type II PC Cards, or one Type III PC Card. See “Using PC 
Cards” on page 164 for more information. 
The PC Card eject buttons release PC Cards from the 
corresponding slots. 
The SD® card slot holds a highly secure, stamp-size flash 
memory card with a capacity of 16 MB, 32 MB, 64 MB or 
128 MB. The card can be used with a variety of digital I/O 
(input/output) products: digital music players, cellular 
phones, PDAs, digital cameras, and digital video camcorders.
The SD card indicator flashes when the drive is in use.
The i.LINK
® port, also known as the IEEE 1394 port, allows 
transfers of large quantities of data between the computer and 
an external device, such as a video camera.
The USB port lets you connect a USB peripheral to your 
computer.
PC Card slots
PC Card eject buttons
USB Port
i.LINK® PortSpeaker
SD® card slotSD® card indicator 
						

							33
Finding Your Way Around
Left side
5.375 x 8.375 ver 2.3
Left side
The 3.5 mm headphone jack lets you connect stereo 
headphones or other audio-output devices, such as external 
speakers. Connecting other devices automatically disables the 
internal speakers.
The 3.5 mm microphone jack lets you connect an external 
monaural microphone or other audio input device. 
The line in jack lets you connect a DVD or CD player, 
cassette tape player, or record player to your computer.
The volume control lets you adjust the sound on your 
computer. To turn the volume up, turn the dial to the right. To 
turn the volume down, turn the dial to the left.
The security lock slot allows you to attach an optional 
PORT- Noteworthy
® computer lock cable to your computer 
for securing it to a large, heavy object such as your desk. 
On those systems with Wi-Fi
TM, the wireless antenna on/off 
switch turns the computer’s wireless antenna on or off. The 
Wi-Fi Mini PCI module is optional. 
On those systems with Wi-Fi
TM, the wireless antenna 
indicator glows amber when the computer’s wireless antenna 
is on. 
Security lock slotMicrophone jack
Line In jack
Headphone jack
Volume
Speaker
Control Dial
Wireless antenna on/off switch*
* functional only on systems with a
wireless module installed
Wireless antenna indicator 
						

							34
Finding Your Way Around
Front with the display open
5.375 x 8.375 ver 2.3
Front with the display open
The computer’s screen is a liquid crystal display (LCD) that 
provides clear, sharp images. For more information about 
viewing options, see “Exploring video features” on page 157.
The power button turns the computer on and off. Holding 
down the power button for four seconds resets the computer.
The Internet button launches your default Internet browser. 
The TOSHIBA Console button allows quick access to 
various functions. 
Power button Screen
indicator panel System Keyboard
To u c h P a d
Primary
buttonSecondary
button
Palm rest
Function keys
CD/DVD control buttons
Internet Button
TOSHBIA Console
One Touch TV
Out Button Button
On 
						

							35
Finding Your Way Around
Front with the display open
5.375 x 8.375 ver 2.3
The One Touch TV out button activates an external display 
device such as a TV when connected to the video/audio line 
out jack.
The 85-key keyboard provides all the functionality of a full-
size keyboard. For more information, see “Using the 
keyboard” on page 70. 
The function keys, when used with the 
Fn key, activate 
several different system functions. For more information, see 
“Hot Keys” on page 215. 
The system indicator panel provides information about 
various system functions.
The TouchPad
TM enables you to move the cursor with the 
stroke of a finger.
The primary and secondary buttons below the TouchPad 
act like the buttons on a mouse, with primary and secondary 
functions.
The front panel provides a palm rest to assist you in 
maintaining proper posture while using the computer. 
The CD/DVD control buttons let you play audio CDs when 
the computer is turned off. You can also use them to play CDs 
and DVDs with the computer turned on. For more 
information, see “CD/DVD control buttons” on page 78.
The stereo speakers let you hear sounds, such as system 
alarms associated with your software, and music from DVD-
ROMs and audio CDs.  
						

							36
Finding Your Way Around
Front with the display open
5.375 x 8.375 ver 2.3
Indicator lights
The CD mode light goes on in CD mode when the computer 
is playing a CD with the computer off.
The digital mode light goes on in digital mode, when the 
computer is playing a CD or DVD with the computer on.
The CD In light glows green when the computer is on. The 
light blinks when the computer is in Standby mode. 
The main battery light indicates the main battery’s current 
charge. It glows green when the battery is fully charged. It 
glows amber while the battery is being charged. It does not 
glow if the external power source is disconnected or if the 
battery is completely discharged. For more information on 
determining remaining battery power, see “Monitoring 
battery power” on page 101. 
The hard disk drive light flashes while the hard disk drive is 
being accessed. 
The disc/disk activity light flashes when the Modular Bay 
drive is being accessed.
The caps lock light glows when you press the 
Caps Lock key. 
When this light is on, pressing a letter key on the keyboard 
produces an uppercase (capital) letter. 
Digital
 CD
Mode
DC In
Digital
Mode
AC PowerBattery
Hard 
Drive
Disc/Disk
Activity 
						

							37
Finding Your Way Around
Underside
5.375 x 8.375 ver 2.3
The cursor control mode light glows when the cursor 
control overlay is on. When this light is on, pressing an 
overlay key moves the cursor in the direction of the white 
arrow printed on the key instead of typing the letter printed 
on the top of the key. For more information, see “Using the 
cursor control overlay” on page 73.
The numeric mode light glows when the numeric overlay is 
on. When this light is on, pressing an overlay key types the 
white number printed on the key instead of typing the letter 
printed on the top of the key. For more information, see 
“Using the numeric keypad overlay” on page 73.
CAUTION: Never turn off the computer while any drive is in use. 
Doing so may damage the media and result in loss of data.
Underside
Battery packBattery release Memory slot
cover
Modular BayModular Bay
release latch
latch 
						

							38
Finding Your Way Around
Underside
5.375 x 8.375 ver 2.3
The Modular Bay lets you use one of several possible 
Modular Bay optical drive modules. A DVD-ROM drive is 
shown in place. For more information, see “Using the 
Modular Bay” on page 162. 
The expansion memory slot cover protects the two 
expansion memory slots where you insert additional memory. 
See  for detailed information. 
The hard disk drive is the computer’s permanent data 
storage device.
CAUTION: To prevent possible CPU overheating, do not block the 
cooling vents when the computer is in use.
The battery pack contains the battery. For information about 
replacing the battery, see “Changing the main battery” on 
page 105. 
The battery release latch secures the battery cover to the 
computer, preventing the cover from dislodging from the 
computer case.  
						

							39
5.375 x 8.375 ver 2.3
Chapter 2
Getting Started
This chapter provides tips for working comfortably, describes 
how to connect components, and explains what to do the first 
time you use your notebook computer.
Selecting a place to work
Your computer is portable and designed to be used in a 
variety of circumstances and locations. 
Creating a computer-friendly environment
Place the computer on a flat surface which is large enough for 
the computer and any other items you need to use, such as a 
printer. Leave enough space around the computer and other 
equipment to provide adequate ventilation and prevent 
overheating.
To keep your computer in prime operating condition, protect 
your work area from:
❖Dust, moisture, and direct sunlight. 
						

							40
Getting Started
Selecting a place to work
5.375 x 8.375 ver 2.3
❖Equipment that generates a strong electromagnetic field, 
such as stereo speakers (other than speakers that are 
connected to the computer) or speakerphones.
❖Rapid changes in temperature or humidity and sources of 
temperature change such as air conditioner vents or 
heaters.
❖Extreme heat, cold, or humidity.
❖Liquids and corrosive chemicals.
CAUTION: If you spill liquid into the computer, turn it off, unplug it 
from the AC power source, and let it dry out completely before 
turning it on again.
If the computer does not operate correctly after you turn it back on, 
contact a Toshiba authorized service provider.
Keeping yourself comfortable
Strain and stress injuries are becoming more common as 
people spend more time using their computers. With a little 
care and proper use of the equipment, you can work 
comfortably throughout the day.
This section provides hints on avoiding strain and stress 
injuries. For more information, consult books on ergonomics, 
repetitive-strain injury, and repetitive-stress syndrome.
Placement of the computer 
Proper placement of the computer and external devices is 
important to avoid stress-related injuries.
❖Place the computer on a flat surface at a comfortable 
height and distance. You should be able to type without 
twisting your torso or neck, and look at the screen 
without slouching.