Home > Toshiba > Notebook > Toshiba Satellite 2430 2435 Manual

Toshiba Satellite 2430 2435 Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Toshiba Satellite 2430 2435 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 566 Toshiba manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							161
    Exploring Your Options
    Connecting a monitor, keyboard and mouse
    5.375 x 8.375 ver 2.3
    To play back sound files through external speakers or 
    headphones:
    1Locate the headphone jack on the left side of the 
    computer.
    2Using any necessary adapters, plug the cable from the 
    headphones or external speakers into the headphone jack.
    The headphone jack requires a 16-ohm stereo mini-jack.
    Connecting a monitor, keyboard and mouse
    By connecting an external monitor, external full-size 
    keyboard and a mouse, you can work with your notebook as 
    if it were a standard office desktop computer.
    You can connect an external monitor to the RGB (monitor) 
    port. For more information, see “Back” on page 30.
    You can connect an external USB-compatible keyboard and a 
    USB-compatible mouse to one of the three USB ports. For 
    more information about connecting a mouse, see 
    “Connecting a mouse” on page 60. 
    						
    							162
    Exploring Your Options
    Using the Modular Bay
    5.375 x 8.375 ver 2.3
    Using the Modular Bay
    The Modular Bay gives you additional flexibility. By 
    inserting and removing Modular Bay modules, you can 
    configure your computer for the task at hand without having 
    to carry unnecessary components with you when you travel. 
    HINT: Items from this list that did not come with your computer 
    can be purchased separately. See the accessories information 
    packaged with your system or visit toshibaaccessories.com.
    Removing a module from the Modular Bay
    NOTE: Use caution when lifting or turning your computer. Failure 
    to do so may result in damage to components, such as cables, 
    attached to your computer, or to the computer itself.
    1Turn off the computer.
    You can also hot swap a module in the Modular Bay. Stop 
    the module by clicking the Safely Remove Hardware 
    icon on the System tray. After the module is stopped, it is 
    safe to remove.
    2Slide the Modular Bay ejection bar towards the front of 
    the computer. 
    						
    							163
    Exploring Your Options
    Using the Modular Bay
    5.375 x 8.375 ver 2.3
    Unlatching the Modular Bay
    3Slide the module out of the computer.
    Sliding the module out
    Inserting a module into the Modular Bay
    To install a module into the Modular Bay, simply slide the 
    module all the way into the Modular Bay. 
    						
    							164
    Exploring Your Options
    Using PC Cards
    5.375 x 8.375 ver 2.3
    Using PC Cards
    PC Cards expand your computer’s capabilities and 
    usefulness. You can purchase additional PC Cards from your 
    dealer. Most PC Cards conform to the PCMCIA (Personal 
    Computer Memory Card International Association) standard. 
    Your computer has two stacked PC Card slots and supports 
    three types of PC Cards: 
    ❖Two Type I and Type II cards.
    ❖One Type III card.
    Check the documentation that came with the PC Card to see 
    if it conforms to the PCMCIA 2.1 standard, or later. Other 
    cards may work with your computer, but are likely to be 
    much more difficult to set up and use.
    PC Card supporting software
    PC Cards require Card and Socket Services software — a set 
    of programs that acts as a translator between the PC Card and 
    the computer, and that makes hot swapping (switching cards 
    while the computer is on) possible. 
    The operating system provides the Card and Socket Services 
    for your PC Card. Even if your PC Card comes with its own 
    version of Card and Socket Services, you should use the files 
    included in the operating system.
    Inserting PC Cards
    NOTE: Use caution when lifting or turning your computer. Failure 
    to do so may result in damage to components, such as cables, 
    attached to your computer, or to the computer itself.
    Before you insert a PC Card, refer to the documentation that 
    comes with the card to see if you need to do anything before you 
    insert it.  
    						
    							165
    Exploring Your Options
    Using PC Cards
    5.375 x 8.375 ver 2.3
    To insert a PC Card:
    1Turn off the computer.
    You may also hot swap a PC Card. Stop the PC Card by 
    clicking the Safely Remove Hardware icon on the System 
    tray. After the Safe to Remove Hardware message appears, it 
    is safe to remove the PC Card.
    2Align the card connectors with an available PC Card slot 
    and carefully slide the card into the slot until it locks into 
    place.
    NOTE: If you have a Type III card, insert the connector into the 
    lower slot. If you have a Type I or Type II card, you can insert it into 
    either the upper or the lower slot.
    There are two eject buttons, one per slot.
    CAUTION: To avoid damaging the PC Card or the computer, don’t 
    force the card into the PC Card slot.
    Removing PC Cards
    1Stop the PC Card by clicking the Safely Remove Hardware 
    icon on the System tray.
    After the Safe to Remove Hardware message appears, it is 
    safe to remove the PC Card.
    2To remove the PC Card, press the slot’s eject button once.
    3Remove the PC Card and store it properly. 
    						
    							166
    Exploring Your Options
    Using PC Cards
    5.375 x 8.375 ver 2.3
    Hot swapping
    One of the great things about PC Cards is that you can 
    replace one PC Card with another while the computer is on. 
    This is called “hot swapping.” 
    Hot swapping precautions
    Although you can insert a PC Card at any time, to avoid data 
    loss never remove a card while it is in use. For example:
    ❖Never remove a hard disk card while the system is 
    accessing it.
    ❖Never remove a network card while you are connected to 
    a network.
    Before removing a PC Card, stop it by clicking the Safely 
    Remove Hardware icon on the System tray. Once the PC Card 
    has stopped, you can safely remove it. See “Removing PC 
    Cards” on page 165. 
    						
    							167
    Chapter 7
    WinDVD
    ™
    WinDVD™ is a software program for playing DVDs. This 
    chapter explains how to use this program.
    Playing DVDs
    TECHNICAL NOTE: For optimum DVD performance, play DVDs 
    while your computer is connected to AC power.
    For systems with a DVD-ROM or DVD-R/RW drive, you can 
    use WinDVD to play DVDs. WinDVD is an easy-to-use, full-
    featured multimedia control center that helps you get the 
    most out of the exciting world of DVD technology. Your 
    computer comes with WinDVD preinstalled.
    WARNING: Before playing a DVD, turn down the volume. Playing 
    the disc at maximum volume could damage your ears.
    Insert a DVD into the drive. The computer automatically 
    detects the disc in the drive and will prompt you what to do.  
    						
    							168
    WinDVD™
    5.375 x 8.375 ver 2.3
    Sample DVD Drive Window
    NOTE: If you wish to have WinDVD run automatically, select Play 
    DVD movie using WinDVD, then select the Always do the selected 
    action checkbox. This checkbox is unchecked by default.
    To open WinDVD manually:
    1Click Start, and point to All Programs.
    2Point to InterVideo WinDVD, then click InterVideo 
    WinDVD.
    The WinDVD player window opens. 
    						
    							169
    WinDVD™
    5.375 x 8.375 ver 2.3
    Sample WinDVD video window with the control panel 
    Using the WinDVD slider bar (location)
    The slider bar enables you to move forward or backward 
    through the DVD content. Move the slider bar to the left to go 
    backward or move it to the right to go forward.  
    						
    							170
    WinDVD™
    5.375 x 8.375 ver 2.3
    Using the WinDVD control panel
    The WinDVD control panel resembles the control panel of a 
    standard home DVD player. 
    TECHNICAL NOTE: The DVD author determines what features the 
    DVD supports. Depending on the DVD format and your computer’s 
    hardware configuration, some of the control panel features may be 
    unavailable when playing a DVD. Unsupported features may not 
    appear or may appear gray, and you cannot select them.
    Sample WinDVD control panel
    You can open a shortcut menu by positioning the cursor over 
    the WinDVD window (other than over the control panel), 
    then clicking the secondary button. The shortcut menu 
    contains the same features as the control panel, plus the 
    enable caption feature, which displays captions for the 
    hearing impaired.
    You can also create a playlist, to customize the order in which 
    the DVD content plays. Once a DVD is playing, the counter 
    displays the current chapter and elapsed time, in 
    hours:minutes:seconds format.
    Step forwardPlayStop
    Title MenuEject Open Minimize
    Maximize
    Close
    Volume
    Step backwardPause
    Help
    Mute
    Bookmarks
    Repeat Capture
    Time Control
    Clock
    Time shift
    Zoom
    Subpanels 
    Fast forward
    Fast backwardNext Chapter
    Previous ChapterSpeed Ring
    Playlist  
    						
    All Toshiba manuals Comments (0)

    Related Manuals for Toshiba Satellite 2430 2435 Manual