Toshiba Projector Tdp Ff1 User Manual

31

Operations

Slideshow
 Start slideshow
• Quick Start
When the projector sets to the USB input and ‘Quick start’ to ‘on’ , the slideshow 
starts with jpeg files in the root folder of the USB memory. 
• Start from file view mode
When a jpeg file is selected in the file view mode, slideshow starts from the selected jpeg 
file.
 Slideshow operation
In the slideshow mode, jpeg files display on the screen fully. To change the files, select
  
or . The picture displayed in the same order as displayed in the file...

32

Using USB Memory (continued)
Use  or  to select [Yes] and press  , the slideshow ends and the projector switches 
to the file view mode.
Use  or  to select [No] and press , Menu OSD shows on the screen. Change the 
settings through menu system including USB slideshow setting.
About USB memory function
 The USB terminal
The USB terminal of the projector is USB 1.1 compliant, which can connect with a USB 
memory.
 USB memory
• 2GB limited USB memory size.
• Do not support USB HDD (Hard disk).
• Do...

33

Operations

 JPEG files
• Supported file extensions are .jpg and .JPG.
• Folders are limited to 21 levels.
• The number of folders in each folder is limited to 127.
• The number of files in each folder is limited to 512.
• Some JPEG files such as interlaced jpeg are not supported. 

34

Placement of the projection screen
Using the screen
Please follow the steps below to set up the screen.
 Open the screen fully, and pull out the stand on the back of the screen and fasten the 
fastener.
 Fold out the bottom of the screen and set up the screen vertically. The image can be 
projected fully on the attached screen when the distance between the projector and the 
screen is about 80 cm.
  Notes
• Place the projector and the screen on a flat place; assure they are stable.
• Image quality...

35

Operations

Using the menus
You can call up on-screen menus, and make adjustments and settings using the operation 
buttons on the control panel (main unit side) and remote control.  
How to use the menus
The menu shown below is for operation instructions purposes and might differ from the 
actual display.
1. Press the MENU button for longer than 1 seconds.   The Image adjustment menu appears.
2. Select a Category
3. Adjustments & Settings
Select a category by using  .
There are following 4...

36

Using the menus (continued)
Image adjustment menu
Use this menu to set or adjust image-related items. Items that can be set or adjusted are 
marked with “Yes”, and those that cannot are marked with “No”. (When an item is masked, 
it indicates that you cannot select for the current input.)
Item   DescriptionComputer (D-SUB)VideoUSBRGBY/PB/PR
VolumeDecrease or increase the Volume  with  .YesYesYesYes
KeystoneCorrect the keystone (trapezoid) distortion of 
the screen.
Screen shrinking    Screen...

37

Operations

Display setting menu
Use this menu to set screen display-related items.(The items in gray color cannot be set with the current input selection.)
Item   Description
R LevelAdjust the red color by press  or .
G LevelAdjust the green color by press  or .
B LevelAdjust the blue color by press  or .
Screen size (Full) < >  (Wide)
 (Full): Display with 800 × 600 resolution
 (Wide): Wide-screen display
16:9 PositionAdjust the vertical position of 16:9 image
Lower   Higher
BackgroundScreen to...

38

Using the menus (continued)
Default setting menu
Item  DescriptionRGBY/PB/PRVideoUSB
Quick StartSet to “On”, then plug in the USB device will enter the Slideshow mode.Set to “Off”, then plug in the USB device will enter the File view mode. No
No NoYes
SlideshowSet slideshow mode
Auto   Manual No
No NoYes
IntervalAdjust the interval time in Slideshow auto 
mode
Short   Long No
No NoYes
Slideshow loopSet loop function of the slideshow
On   OffNo
No NoYes
Display 
effect
Set transition effect of the...

39

Operations

Displaying Information (Status display)
This displays information about the input signal, battery life time, and so on.“Yes”: displayed, “No”: not displayed
Item  DescriptionRGBY/PB/PRVideoUSB
InputInput source nameYesYesYesYes
ResolutionResolution (in dots)YesNoNoNo
Video modeDisplay color method of video 
signal
NoYesYesNo
Battery infoDisplay the battery remainsYesYesYesYes
VersionFirmware version [Note]YesYesYesYes
  Notes
1.  The mode of supported RGB signals 
 is shown.
2....

40
Lens cleaning
•  Clean the lens with a commercially available blower and/or 
lens cleaner.
•  The lens is easily scratched, so do not rub it with hard objects, 
or strike it.
Main unit cleaning
•  Clean the main unit after unplugging the power 
cord.
•  Wipe dirt off the main unit gently with a soft cloth.
•  Do not wipe the main unit with a damp cloth. Doing 
so may allow water to get inside, resulting in an 
electric shock or failure.
•  Do not use benzene, thinner or similar substances, 
like as...