Toshiba Projector Tdp Ff1 User Manual

11

Before Using

OTHER CAUTIONS AND INFORMATIONS
Copyrights
Showing  or  transmitting  commercial  imaging  software  or  broadcast  or  cable-broad  cast-
ing  programs  with  the  purpose  of  other  than  the  personal  and  private  viewing,  including 
modifying  images  using  the  freeze  functions,  or  displaying  with  the  varying  aspect  ratio 
of  the  images,  could  violate  the  direct  or  indirect  copyrights  of  the  imaging  software  or 
broadcast program, etc., if done without fi...

12

BATTERIES
The Battery Type
For remote control: Be sure to use the lithium CR2025 battery.
For Projector: Be sure to use TLPBP1 battery pack.
Caution
• Never shock the battery pack by dropping or throwing it.
• Never throw the battery pack into a fire, as this could cause the battery pack to explode.
• Never  disassemble  the  battery  pack,  as  this  could  cause  leakage  of  alkaline  solution  or other electrolytic substance.
• Never  short-circuit  the  battery  pack  by  either  accidentally...

13

Before Using

TABLE OF CONTENTS
SAFETY PRECAUTIONS         2
IMPORTANT SAFETY INSTRUCTIONS    
4
OTHER CAUTIONS AND INFORMATIONS    1
1
BATTERIES              1
2
Checking the package contents        1
5
Main unit components          16
Control keypad and functions        1
8
Remote control keypad and functions     1
9
Using the battery pack with the projector    20
Using the remote control          22
Chang ing the new lithium battery          22
Operating the remote control            22
Placement...

14
How to use the menus            35
Image adjustment menu            36
Display setting menu              37
Default setting menu              38
Displaying Information (Status display)        3
9
Lens and main unit cleaning        40
Lens cleaning                40
Main unit cleaning              4
0
Before calling service personnel       41
Indicators                42
Specifications              4
3
List of general specifications            43
List of supported signals (RGB signals)        4
4
List...

15
Preparations
Checking the package contents
 The Supplied CD-ROM
The supplied CD-ROM contains an owner’s manual and Acrobat® Reader™ to view the 
manual.
  Installing Acrobat® Reader™
Windows®: Run the CD-ROM, select the Reader/English folder, and run ar500enu.exe.
Follow the on-screen instructions.
Macintosh:  Run  the  CD-ROM,  select  the Reader/English  folder,  and  run  Reader  In
-
staller. Follow the on-screen instructions to install the software.
  Viewing the manual
Run  the  CD-ROM  and...

16

Main unit components
Top
Left
1. Focus RingAdjusts the focus
2. Control PanelOperates the projector
3. LED indicatorsIndicates projector 
status
TEMPLights wh
en temperature 
too high
BATT.Display battery condition
POWERLights when power on
6. USB portPlug in USB memory
7. Headphone Outputs audio signals
8. Audio in Inputs audio signals
9. Video inInputs video signals from 
video equipment
10. Antitheft lock 
hole
For security lock
11. Computer inInputs analog RGB 
signal from computer, or...

17

Preparations

Right
12. DC inputConnect the AC adaptor
13. Power switchTurn on/off the projector
14. VentilatorAir  ventilator  for  cooling 
inside
15. SpeakerOuputs sounds from audio in terminals
16. Battery packLi-ion battery TLPBP1
1213
14
1516
17
18
Rear
17. Service portFor service only
18. Battery   power in connector
For battery connection
Front
19. LensProjects expanded image
20. Infrared remote sensor Sense  commands  from the remote control
2019 

18

Control keypad and functions
1. Input/MenuNormal mode:
• Change input source when pressing for less than 1 seconds.
• Display menu system when pressing for longer than 1 seconds.
• Move to upper level in menu system.
File view mode:
• Same as Normal mode.
Slideshow mode:
• Changes input source when pushing shorter than 1 seconds.
• Exits slideshow and go to file view mode (pressing for longer than 1 seconds.)
Sub-menu “Stop slideshow?” is shown
 Select Yes: go to file view mode.
 Select No: display...

19

Preparations

1. AUTOSETAuto set  
2. Normal mode:
• When OSD is not displayed: No action
• When OSD is displayed: Confirm screen menu selections 
File view mode:
• When OSD is not displayed:
 Highlight on a file: Start the slideshow
 Highlight on a directory: Change the directory
• When OSD is displayed:
 Confirm screen menu selections 
Slideshow mode:
• To pause or re-start the slide show
3. Volume +/-Adjust volume
4. KeystoneCorrect image distortion
5. FreezePause image (Computer, Video input...

20

Using the battery pack with the projector
The following procedures are for the installation of the battery pack with the projector.
Installing the battery
 Turn off the power switch and disconnect the AC adaptor.
 Open the battery connector cover.
 Plug in the battery pack.
 Press down the battery pack firmly until it clicks into place.
 Switch the power button to turn on the projector.
Remove the battery
 Turn off the power switch and disconnect the AC adaptor.
 Move the button to “unlock”...