Toshiba P200 Manual
Here you can view all the pages of manual Toshiba P200 Manual. The Toshiba manuals for Satellite are available online for free. You can easily download all the documents as PDF.
Page 181
Satellite P200/Satellite Pro P200 B-5Display Modes 5. In the subsequent dialogue box, click Display Devices and then set up your television and notebook displays. For nVidia 1. Click Start > Control Panel > Appearance and Personalization > Personalization. 2. Choose Display Settings.
Page 182
B-6 Satellite P200/Satellite Pro P200Display Modes 3. Click the Advanced Settings button. The Generic PnP Monitor and NVIDIA GeForce Go 7600 Properties dialogue box opens. 4. Click Start the NVIDIA Control Panel.
Page 183
Satellite P200/Satellite Pro P200 B-7Display Modes 5. Click Display item. 6. Click Change Display Configuration item. 7. Setup your television and notebook display.
Page 185
User’s ManualC-1 Satellite P200/Satellite Pro P200 Appendix C AC Power Cord and Connectors The power cords AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Certification agencies Length:Minimum 1.7 meters Wire size:Minimum 0.75 mm 2 Current rating:Minimum 2.5 amperes Voltage rating:125 or 250 VAC (depending on country/regions power...
Page 186
C-2 Satellite P200/Satellite Pro P200AC Power Cord and Connectors In Europe, two conductors power cord must be VDE type, H05VVH2-F or H03VVH2-F and for three conductors power cord must be VDE type, H05VV-F. For the United States and Canada, two pin plug configuration must be a 2- 15P (250V) or 1-15P (125V) and three pin plug coniguration must be 6-15P (250V) or 5-15P (125V) as designated in the U. S. National Electrical code handbook and the Canadian Electrical Code Part II. The following...
Page 187
User’s ManualGlossary-1 Satellite P200/Satellite Pro P200 Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference. Abbreviations AC: alternating current AGP: accelerated graphics port BIOS: basic input output system CD-ROM: Compact Disc-Read Only Memory CD-RW: Compact Disc-Read/Write CMOS: complementary metal-oxide semiconductor CPU: central processing unit CRT: cathode ray tube DC: direct current DDC: display data channel DMA:...
Page 188
Glossary-2 Satellite P200/Satellite Pro P200Glossary SCSI: small computer system interface TFT: thin-film transistor USB: Universal Serial Bus VESA: Video Electronic Standards Association VGA: video graphics array WXGA+: wide extended graphics array A adaptor: A device that provides an interface between two dissimilar electronic devices. For example, the AC adaptor modifies the power from a wall outlet for use by the computer. This term also refers to the add-in circuit cards that control...
Page 189
Satellite P200/Satellite Pro P200 Glossary-3Glossary capacity: The amount of data that can be stored on a magnetic storage device such as a floppy disk or hard disk. It is usually described in terms of kilobytes (KB), where one KB = 1024 bytes and megabytes (MB), where one MB = 1024 KB. CD-ROM: A Compact Disc-Read Only Memory is a high capacity disc that can be read from but not written to. The CD-ROM drive uses a laser, rather than magnetic heads, to read data from the disc. CD-R: A Compact...
Page 190
Glossary-4 Satellite P200/Satellite Pro P200Glossary D DC: Direct Current. Electric current that flows in one direction. This type of power is usually supplied by batteries. default: The parameter value automatically selected by the system when you or the program do not provide instructions. Also called a preset value. device driver: A program that controls communication between a specific peripheral device and the computer. The CONFIG.SYS file contains device drivers that MS-DOS loads when you...