Toshiba P200 Manual

							Satellite P200/Satellite Pro P200 B-5Display Modes
5. In the subsequent dialogue box, click Display Devices and then set up 
your television and notebook displays.
For nVidia
1. Click Start > Control Panel > Appearance and Personalization > 
Personalization.
2. Choose Display Settings. 
						

							B-6 Satellite P200/Satellite Pro P200Display Modes
3. Click the Advanced Settings button. The Generic PnP Monitor and 
NVIDIA GeForce Go 7600 Properties dialogue box opens.
4. Click Start the NVIDIA Control Panel. 
						

							Satellite P200/Satellite Pro P200 B-7Display Modes
5. Click Display item.
6. Click Change Display Configuration item.
7. Setup your television and notebook display. 
						

							B-8 Satellite P200/Satellite Pro P200Display Modes 
						

							User’s ManualC-1
Satellite P200/Satellite Pro P200
Appendix C
AC Power Cord and Connectors
The power cords AC input plug must be compatible with the various 
international AC power outlets and the cord must meet the standards for 
the country/region in which it is used. All cords must meet the following 
specifications:
Certification agencies
Length:Minimum 1.7 meters
Wire size:Minimum 0.75 mm
2
Current rating:Minimum 2.5 amperes
Voltage rating:125 or 250 VAC
(depending on country/regions power standards)
U.S. and Canada:UL listed and CSA certified
No. 18 AWG, Type SVT or SPT-2
Australia:AS
Europe:
Austria:OVEItaly:IMQ
Belgium:CEBECThe 
Netherlands:KEMA
Denmark:DEMKONorway:NEMKO
Finland:FIMKOSweden:SEMKO
France:LCIESwitzerland:SEV
Germany:VDEUnited 
Kingdom:BSI 
						

							C-2  Satellite P200/Satellite Pro P200AC Power Cord and Connectors
In Europe, two conductors power cord must be VDE type, H05VVH2-F or 
H03VVH2-F and for three conductors power cord must be VDE type, 
H05VV-F.
For the United States and Canada, two pin plug configuration must be a 2-
15P (250V) or 1-15P (125V) and three pin plug coniguration must be 6-15P 
(250V) or 5-15P (125V) as designated in the U. S. National Electrical code 
handbook and the Canadian Electrical Code Part II.
The following illustrations show the plug shapes for the U. S. A. and Canada, 
the United Kingdom, Australia and Europe.
USA United Kingdom
UL approved
BS approved
Australia
AS  approved Approved by the appropriate 
agency
Canada
CSA approvedEurope
China
CCC approved 
						

							User’s ManualGlossary-1
Satellite P200/Satellite Pro P200
Glossary
The terms in this glossary cover topics related to this manual. 
Alternate naming is included for reference.
Abbreviations
AC:  alternating current
AGP:  accelerated graphics port
BIOS:  basic input output system
CD-ROM:  Compact Disc-Read Only Memory 
CD-RW:  Compact Disc-Read/Write
CMOS:  complementary metal-oxide semiconductor
CPU:  central processing unit
CRT:  cathode ray tube
DC:  direct current
DDC:  display data channel
DMA:  direct memory access
DOS:  disk operating system
DVD: digital versatile disc
ECP:  extended capabilities port
FDD:  floppy disk drive
HDD:  hard disk drive
IDE:  integrated drive electronics
I/O:  input/output
IRQ:  interrupt request
KB:  kilobyte
LCD:  liquid crystal display
LED:  light emitting diode
LSI:  large scale integration
MS-DOS:  Microsoft Disk Operating System
PCI:  peripheral component interconnect
RAM:  random access memory
ROM:  read only memory
RTC:  real time clock 
						

							Glossary-2 Satellite P200/Satellite Pro P200Glossary
SCSI:  small computer system interface
TFT:  thin-film transistor
USB:  Universal Serial Bus
VESA:  Video Electronic Standards Association
VGA:  video graphics array 
WXGA+:  wide extended graphics array
A
adaptor:  A device that provides an interface between two dissimilar 
electronic devices. For example, the AC adaptor modifies the power 
from a wall outlet for use by the computer. This term also refers to 
the add-in circuit cards that control external devices, such as video 
monitors and magnetic tape devices. 
application:  A group of programs that together are used for a specific task 
such as accounting, financial planning, spreadsheets, word 
processing and games.
B
BIOS:  Basic Input Output System. The firmware that controls data flow 
within the computer. See also firmware.
bit:  Derived from binary digit, the basic unit of information used by the 
computer. It is either zero or one. Eight bits is one byte. See also byte.
boot:  Short for bootstrap. A program that starts or restarts the computer.  
The program reads instructions from a storage device into the 
computer’s memory.
bps:  Bits per second. Typically used to describe the data transmission 
speed of a modem.
buffer:  The portion of the computer’s memory where data is temporarily 
stored. Buffers often compensate for differences in the rate of flow 
from one device to another.
bus:  An interface for transmission of signals, data or electric power.
byte:  The representation of a single character. A sequence of eight bits 
treated as a single unit; also the smallest addressable unit within the 
system.
C
cache memory:  High speed memory which stores data that increases 
processor speed and data transfer rate. When the CPU reads data 
from main memory, it stores a copy of this data in cache memory. 
The next time the CPU needs that same data, it looks for it in the 
cache memory rather than the main memory, which saves time. The 
computer has two cache levels. Level one is incorporated into the 
processor and level two resides in external memory. 
						

							Satellite P200/Satellite Pro P200 Glossary-3Glossary
capacity:  The amount of data that can be stored on a magnetic storage 
device such as a floppy disk or hard disk. It is usually described in 
terms of kilobytes (KB), where one KB = 1024 bytes and megabytes 
(MB), where one MB = 1024 KB.
CD-ROM:  A Compact Disc-Read Only Memory is a high capacity disc that 
can be read from but not written to. The CD-ROM drive uses a laser, 
rather than magnetic heads, to read data from the disc.
CD-R:  A Compact Disc-Recordable disc can be written once and read 
many times. See also CD-ROM.
CD-RW:  A Compact Disc-Read/Write disc can be rewritten many times. 
See also CD-ROM.
character:  Any letter, number, punctuation mark, or symbol used by the 
computer. Also synonymous with byte.
chip:  A small semiconductor containing computer logic and circuitry for 
processing, memory, input/output functions and controlling other 
chips.
CMOS:  Complementary Metal-Oxide Semiconductor. An electronic circuit 
fabricated on a silicon wafer that requires very little power.  Integrated 
circuits implemented in CMOS technology can be tightly packaged 
and are highly reliable.
compatibility:  1) The ability of one computer to accept and process data 
in the same manner as another computer without modifying the data 
or the media upon which it is being transferred.
2) the ability of one device to connect to or communicate with another 
system or component.
components:  Elements or parts (of a system) which make up the whole 
(system).
configuration:  The specific components in your system (such as the 
terminal, printer, and disk drives) and the settings that define how 
your system works. You use the HW Setup program to control your 
system configuration.
control keys:  A key or sequence of keys you enter from the keyboard to 
initiate a particular function within a program.
controller:  Built-in hardware and software that controls the functions of a 
specific internal or peripheral device (e.g. keyboard controller).
CPU:  Central Processing Unit. The portion of the computer that interprets 
and executes instructions.
CRT:  Cathode Ray Tube. A vacuum tube in which beams projected on a 
fluorescent screen-producing luminous spots. An example is the 
television set.
cursor:  A small, blinking rectangle or line that indicates the current position 
on the display screen. 
						

							Glossary-4 Satellite P200/Satellite Pro P200Glossary
D
DC:  Direct Current. Electric current that flows in one direction. This type of 
power is usually supplied by batteries.
default:  The parameter value automatically selected by the system when 
you or the program do not provide instructions. Also called a preset 
value.
device driver:  A program that controls communication between a specific 
peripheral device and the computer. The CONFIG.SYS file contains 
device drivers that MS-DOS loads when you turn the computer on.
dialog box:  A window that accepts user input to make system settings or 
record other information.
disk drive:  The device that randomly accesses information on a disk and 
copies it to the computer’s memory. It also writes data from memory 
to the disk. To accomplish these tasks, the unit physically rotates the 
disk at high speed past a read-write head.
display:  A CRT, LCD, or other image producing device used to view 
computer output.
DOS:  Disk Operating System. See operating system.
driver:  A software program, generally part of the operating system, that 
controls a specific piece of hardware (frequently a peripheral device 
such as a printer or mouse).
DVD-RAM:  A Digital Versatile Disc Random Access Memory is a high-
capacity, high performance disc that lets you store large volumes of 
data. The DVD-ROM drive uses a laser to read data from the disc. 
DVD-ROM:  A Digital Versatile Disc Read Only Memory is a high capacity, 
high performance disc suitable for play back of video and other high-
density files. The DVD-ROM drive uses a laser to read data from the 
disc. 
E
execute:  To interpret and execute an instruction.
F
floppy disk:  A removable disk that stores magnetically encoded data. 
floppy disk drive (FDD):  An electromechanical device that reads and writes 
to floppy disks.
folder:  An icon in Windows used to store documents or other folders.
format:  The process of readying a blank disk for its first use. Formatting 
establishes the structure of the disk that the operating system 
expects before it writes files or programs onto the disk.
function keys:  The keys labeled F1 through F12 that tell the computer to 
perform certain functions.