Toshiba L50c Manual

2. Click Photos in the upper-left corner of the screen.
3. Select a folder icon or date icon for playback.
4. Click a photo file to playback.
Opening TOSHIBA Media Player by sMedio TrueLink+
Manual
The features and operations about TOSHIBA Media Player are explainedin the TOSHIBA Media Player Manual.
Use the following procedure to open TOSHIBA Media Player Manual:
Click the  Tutorials  icon on the Start Page of TOSHIBA Media Player.
Use the following procedure to open TOSHIBA Media Player Online help:...

The TOSHIBA PC Health Monitor software does not extend or modify
TOSHIBA's obligations under its standard limited warranty in any way. TOSHIBA's standard limited warranty terms and limitations apply.
Starting the TOSHIBA PC Health Monitor The TOSHIBA PC Health Monitor can be started by clicking  Desktop ->
Desktop Assist (in taskbar) -> Support & Recovery -> PC Health  Monitor .
The TOSHIBA PC Health Monitor main screen will be displayed and on
clicking  Please click here to enable TOSHIBA PC...

Setting up HDD ProtectionYou can change HDD Protection settings.
To open the utility, click  Desktop -> Desktop Assist (in taskbar) ->
Tools & Utilities -> System Settings -> HDD Protection . The utility can
also be started from the icon in the Taskbar or from the  Control Panel.
HDD Protection
You can enable or disable HDD Protection by moving the slider to the right
or left.
HDD Protection does not work when the computer is booting, in Sleep Mode, in Hibernation Mode, in transition to Hibernation Mode,...

different detection levels for the computer depending on whether it runswith the AC power (desktop) or with batteries (handheld or mobile usage),the detection level automatically switches according to the power
connection mode.
Detection Level Amplification
When the AC adaptor is disconnected, HDD Detection assumes that the computer will be carried and sets the detection level to the maximum for 10seconds.
Default
You can reset HDD Protection settings to factory default by first clickingDefault  button...

Creating Recovery MediaThis section describes how to create Recovery Media.Be sure to connect the AC adaptor when you create Recovery Media.
Be sure to close all other software programs except the Recovery
Media Creator.
Do not run software such as screen savers which can put a heavy
load on the CPU.
Operate the computer at full power.
Do not use power-saving features.
Do not write to the media when the virus check software is running.
Wait for it to finish, then disable virus detection programs...

Restoring the pre-installed software from your created
Recovery Media
If the pre-installed files are damaged, you are able to use the Recovery
Media you have created to restore the computer to the state it was in when you originally received it. To perform this restoration, follow the steps
below:When you reinstall the Windows operating system, the hard disk will
be reformatted and all data will be lost.
Please make sure that the Boot Speed is set to  Normal. (To access it,
click  Desktop -> Desktop...

If you have not created "Recovery Media", please contact TOSHIBA
support for assistance.
Restoring the pre-installed software from the
Recovery Hard Disk Drive
A portion of the total Hard Disk Drive space is configured as a hiddenrecovery partition. This partition stores files which can be used to restorepre-installed software in the event of a problem.
If you subsequently set up your Hard Disk Drive again, do not change, delete or add partitions in a manner other than specified in the...

1. Visit https://backupmedia.toshiba.eu on the Internet.
2. Follow the on-screen instructions. You will receive your Recovery Discs within two weeks after placing your order.
User's Manual 5-22 

Chapter 6
Troubleshooting TOSHIBA has designed this computer for durability, however, shouldproblems occur you are able to use the procedures detailed in this chapter
to help determine the cause.
All users should become familiar with this chapter as knowing what might go wrong can help prevent problems from occurring in the first place.
Problem solving process Resolving problems will be much easier if you observe the following
guidelines:
Stop immediately when you recognize a problem exists as taking...

Check all cables to ensure they are correctly and firmly attached to the
computer - loose cables can cause signal errors.
Inspect all connecting cables for loose wires and all connectors for loose pins.
Check that your disc media is correctly loaded
Always try to make detailed notes of your observations and keep them in a permanent error log - this will help you to describe your problems toTOSHIBA Support. In addition, if a problem recurs, the log you have madewill help to identify the problem faster....