Toshiba Ikwb16aw Manual

61
3. WPA-PSK: Use WPA (Wi-Fi Protected Access) pre-shared keyWPA2-PSK: Use WPA2 pre-shared key.
Wi-Fi  Protected Access  (WPA  and  WPA2)  is  a  certification  program  to  indicate  compliance  with  the 
security  protocol  created  to  secure  wireless  computer  networks.  This  protocol  improved  several 
serious weaknesses of the previous system, WEP.
WPA2 is advanced protocol, it introduces a new AES based algorithm, that is considered more secure.
■ Algorithm: Choose one of the following...

62
DDNS
This  section  explains  how  to  configure  dynamic  domain  name  service  for  the  Network  Camera. 
DDNS is a service that allows your Network Camera, especially when assigned with a dynamic 
IP address, to have a fixed host and domain name.
DDNS: Dynamic domain name service
Enable DDNS: Select this option to enable the DDNS setting.
Provider:  The  provider  list  contains  seven  hosts  that  provide  DDNS  service.  Please  connect  to  the 
service  provider’s  web  site  to  review  the...

63
Access List Advanced Mode
This section explains how to control access permission by verifying the client PC’s IP address.
General Settings 
Maximum  number  of  concurrent  streaming  connection(s)  limited  to:  Simultaneous  live  viewing  for  1~10 
clients (including stream 1 and stream 2). The default value is 10. If you modify the value and click  Save, 
all current connections will be disconnected and automatically attempt t\
o re-link.
View  Information:  Click  this  button  to  display  the...

64
■ Refresh: Click this button to refresh all current connections.
■ Add to deny list: You can select entries from the Connection Status list and add them to the Deny List to  deny  access.  Please  note  that  those  checked  connections  will  only  be  disconnected  temporarily 
and  will  automatically  try  to  re-link  again  (IE  Explore  or  Quick Time  Player).  If  you  want  to  enable  the 
denied list, please check  Enable access list filtering and click Save in the first column.
■...

65
Network:  This  rule  allows  the  user  to  assign  a  network  address  and  corresponding  subnet  mask  to  the 
Allow/Deny List.
For example:
Range:  This  rule  allows  the  user  to  assign  a  range  of  IP  addresses  to  the Allow/Deny  List.  This  rule  is 
only applied to IPv4.
For example:
■ Delete Allowed/Denied list: 
In the Delete Allowed List or Delete Denied List column, make a selection and click Delete.
● For example, when the range of IP addresses on the allowed list is set from...

66
Audio and Video
This section explains how to configure the audio and video settings of the Network Camera. It is 
composed of the following two columns: Video Settings and Audio Settings.
Video Settings
Video title: Enter a name that will be displayed on the title bar of the live video\
.
Color: Select to display color or black/white video streams.
Power line frequency: Set the power line frequency consistent with local utility settings to eliminate image 
flickering  associated  with  fluorescent...

67
Video orientation: Flip--vertically reflect the display of the live video; Mirror--horizontally reflect the display 
of the live video. Select both options if the Network Camera is installed upside-down (ex. on the ceiling) 
to correct the image orientation.
Overlay  title  and  time  stamp  on  video:  Select  this  option  to  place  the  video  title  and  time  on  the  video 
streams. The time refers to System Time on page 33.
Note  that  when  the  frame  size  is  set  to  176  x  144  as...

68
Image Settings Advanced Mode
Click Image  settings  to  open  the  Image  Settings  page.  On  this  page,  you  can  tune  the  White  balance, 
Brightness, Saturation, Contrast, and Sharpness settings for the video.
White balance : Adjust the value for the best color temperature.
■ Auto
The Network Camera automatically adjusts the color temperature of the light in response to different light 
sources. The white balance setting defaults to  Auto and works well in most situations.
■ Keep current...

69
Enable Edge Enhancement
Edge enhancement is an image processing filter that enhances the edge contrast of an image or video to 
improve its sharpness. Enter a value from 1 to 128 to set the degree of \
enhancement desired.
Enable Noise Reduction
Noise  reduction  is  the  process  of  removing  noise  from  a  signal.  Select  the  type  of  noise  to  remove  and 
enter a value from 1 to 63 to set the degree of enhancement required.
You  can  click Preview  to  fine-tune  the  image,  or  click...

70
Sensor Settings Advanced Mode
Click Sensor Settings to open the Image Sensor Settings page. On this page, you can set the maximum 
exposure time, exposure level, and AGC (Auto Gain Control) settings.
You can configure two sets of sensor settings: one for normal situations, the other for special situations, 
such as day/night/schedule mode.
Exposure
■  Maximum  Exposure  Time:  Select  a  proper  maximum  exposure  time  according  to  the  light  source  of 
the  surroundings.  The  exposure  times...