Toshiba Ikwb16aw Manual

91
FTP: Select to send the media files to an FTP server when a trigger is activated.
■ Server address: Enter the domain name or IP address of the FTP server.
■ Server portBy  default,  the  FTP  server  port  is  set  to  21.  It  can  also  be  assigned  to  another  port  number  between 
1025 and 65535.
■ User name: Enter the login name of the FTP account.
■ Password: Enter the password of the FTP account.
■ FTP folder name Enter  the  folder  where  the  media  file  will  be  placed.  If  the...

92
HTTP: Select to send the media files to an HTTP server when a trigger is activated.
■ URL: Enter the URL of the HTTP server.
■ User name: Enter the user name if necessary.
■ Password: Enter the password if necessary.
To  verify  if  the  HTTP  settings  are  correctly  configured,  click Test.  The  result  will  be  shown  in  a  pop-up 
window as below. If successful, you will receive a test.txt file on the HTTP server.
Click Save to enable the settings, then click  Close to exit the page.
Network...

93
Media Settings
Click Add  Media  on  the  Event  Settings  page  to  open  the  Media  Settings  page.  On  this  page,  you  can 
specify the type of media that will be sent when a trigger is activated. A total of 5 media settings can be 
configured.
Media name: Enter a name for the media setting.
Media Type
There are three choices of media types available: Snapshot, Video Clip, and System log. 
Select the item 
to display the detailed configuration options. You can configure either one or all of...

94
Video clip: Select to send video clips when a trigger is activated. 
■  Source:  The  source  of  video  clip,  which  will  be  identical  to  the  time  shift  caching  stream.  For  more 
information about time shift caching stream, please refer to page 66.
■ Pre-event recordingThe Network Camera has a buffer area; it temporarily holds data up to a certain limit. Enter a number 
to decide the duration of recording before a trigger is activated. Up to\
 9 seconds can be set.
■ Maximum duration...

95
When  completed,  click Save  to  enable  the  settings  and  click  Close  to  exit  this  page.  The  new  media 
settings will appear on the Event Settings page. 
You can continue to select a server and media type for the event. Please go back to page 91 for detailed 
information.
■ SD Test:  Click to test your SD card. The system will display a message indicating success or failure. If 
you want to use your SD card for local storage, please format it before use.  Please refer to page 105 
for...

96
    The following is an example of a file destination with video clips:
    Click 20100115 to open the directory:
20100115
20100116
20100117
Click to delete selected itemsClick to delete all recorded data
The format is: YYYYMMDD
Click to open the directory
Click  to  delete 
selected itemsClick to delete all 
recorded dataClick to go back to the previous 
level of the directory
The format is: HH (24r)
Click to open the file list for that hour
The format is: File name prefix + Minute (mm)
You  can  set...

97
Recording Advanced Mode
This section explains how to configure the recording settings for the Network Camera.
Recording Settings
●
 Before setting up this page, please set up the Network Storage on the Server Settings page first.
●  Please  remember  to  format  your  SD  card  when  using  for  the  first  time.  Please  refer  to  page  100  for 
detailed information.
Network Storage Setting
Click Server to open the Server Settings page and follow the steps below to set up:
1. Fill in the...

98
   If successful, you will receive a test.txt file on the network storage server.
    
3. Enter a server name.
4. Click Save to complete the settings and click  Close to exit the page.
Recording Settings
Click  Add  to  open  the  recording  setting  page.  In  this  page,  you  can  define  the  recording  source, 
recording schedule and recording capacity. A total of 2 recording settings can be configured.
Recording name: Enter a name for the recording setting.
Enable this recording: Select this...

99
Source: Select the recording source (stream 1 ~ 4).
Recording Schedule: Specify the recording duration.
■ Select the days of the week.
■ Select the recording start and end times in 24-hr time format.
Destination: You can select the SD card or network storage that was set up for the recorded video files. 
Capacity: You can choose either the entire free space available or limit the recording size. The recording 
size limit must be larger than the reserved amount for cyclic recording.\
File name prefix:...

100
Local Storage Advanced Mode
This  section  explains  how  to  manage  the  local  storage  on  the  Network  Camera.  Here  you  can 
view SD card status, search for recorded files to playback, download, etc.
SD Card Management
SD card status: This column shows the status and reserved space of your SD card. Please remember to 
format the SD card when using for the first time.
no SD card