Home > Toshiba > Printer > Toshiba E Studio 207 User Manual

Toshiba E Studio 207 User Manual

Here you can view all the pages of manual Toshiba E Studio 207 User Manual. The Toshiba manuals for Printer are available online for free. You can easily download all the documents as PDF.

Page 41

TCP/IP Configuration    39
15Press the [CANCEL] button once or press the [FUNCTION CLEAR] 
button to return the screen to the “user function mode” main 
screen.
14Press   or   to select COM-
PLETE, and then press the 
[ENTER] button.
The initialization starts and “Initializing” 
appears. When it is completed, 
“Operation Completed” appears and the 
screen returns to the one shown in step 
3.
NETWORK
01.COMPLETE
02.ETHERNET
03.TCP/IP
Downloaded From ManualsPrinter.com Manuals 

Page 42

5 CONFIGURING NETWORKS (EQUIPMENT)
40    IPX/SPX Configuration
IPX/SPX Configuration
You can configure IPX/SPX protocol. The IPX/SPX protocol is configured usually to communi-
cate with a NetWare file server.
1Press the [USER FUNCTIONS] 
button when the ready screen 
is displayed.
The “user functions mode” main screen 
appears.
2Press   or   to select INI-
TIAL SETUP, and then press 
the [ENTER] button.
3Press   or   to select NET-
WORK, and then press the 
[ENTER] button.
4Press   or   to select IPX/...

Page 43

IPX/SPX Configuration    41
9Press the [ENTER] button.
The screen returns to the one shown in step 7.
12Press the [CANCEL] button once or press the [FUNCTION CLEAR] 
button to return the screen to the “user function mode” main 
screen.
8Press   or   to select the 
desired frame type.
AUTO SENSE:   Detects the most appropriate frame type automatically.
IEEE802.2:   Selects a frame type compatible with IEEE802.2.
IEEE802.3:   Selects a frame type compatible with IEEE802.3.
ETHERNET II:   Selects a frame...

Page 44

5 CONFIGURING NETWORKS (EQUIPMENT)
42    AppleTalk Configuration
AppleTalk Configuration
AppleTalk protocol must be enabled when AppleTalk printing from Macintosh computers needs 
to be enabled.
Set the device name of this equipment and AppleTalk zone using TopAccess as required. 
See the following page:
	 P.89 “Setting up the AppleTalk”
1Press the [USER FUNCTIONS] 
button when the ready screen 
is displayed.
The “user functions mode” main screen 
appears.
2Press   or   to select INI-
TIAL SETUP, and...

Page 45

AppleTalk Configuration    43
9Press the [CANCEL] button once or press the [FUNCTION CLEAR] 
button to return the screen to the “user function mode” main 
screen.
7Press the [CANCEL] button 
once to return the screen to 
the NETWORK menu screen.
If you press the [CANCEL] button more than twice and exit the NETWORK menu, the 
NIC initialization operation in the next step becomes ineffective. In this case, repeat the 
procedure from step 1.
8Press   or   to select COM-
PLETE, and then press the 
[ENTER]...

Page 46

5 CONFIGURING NETWORKS (EQUIPMENT)
44    HTTP Configuration
HTTP Configuration
To use a web-based utility TopAccess, HTTP network server service must be enabled. This ser-
vice must be enabled also for IPP printing.
1Press the [USER FUNCTIONS] 
button when the ready screen 
is displayed.
The “user functions mode” main screen 
appears.
2Press   or   to select INI-
TIAL SETUP, and then press 
the [ENTER] button.
3Press   or   to select NET-
WORK, and then press the 
[ENTER] button.
4Press   or   to select...

Page 47

HTTP Configuration    45
13Press the [CANCEL] button once or press the [FUNCTION CLEAR] 
button to return the screen to the “user function mode” main 
screen.
8Key in the port number (nor-
mally “80”) to access HTTP, 
and then press the [ENTER] 
button.
The screen returns to the one shown in 
step 7.
Port number “80” is set by default. If you want to change it, press the [Clear/Stop] button 
and key in the desired port number.
9Press   or   to select SEC-
ONDARY PORT NUMBER, and 
then press the [ENTER]...

Page 48

Downloaded From ManualsPrinter.com Manuals 

Page 49

6.TopAccess OVERVIEW
This chapter describes the overview of TopAccess and how to access TopAccess.
TopAccess Overview ..............................................................................................48
End user mode .................................................................................................................................. 48
Administrator mode ........................................................................................................................... 49...

Page 50

6 TopAccess OVERVIEW
48    TopAccess Overview
TopAccess Overview
TopAccess has two access levels: the end user level and the administrator level. The adminis-
trator can configure all settings available and can perform maintenance operations.
yFor detailed explanation on TopAccess, see the following page: 
	 P.14 “Use environments of TopAccess”
yDisplay and setting items for Fax are available only when the Fax Kit (optional) is installed in 
this equipment.
When the setting or operation given in this...
Start reading Toshiba E Studio 207 User Manual

Related Manuals for Toshiba E Studio 207 User Manual

All Toshiba manuals