Toshiba E Studio 167 User Manual

Viewing Counters    79
2Enter a department code that you want to display the counter in the 
“Department Code” field and click [Enter].
The department counter for specified department is displayed.
Downloaded From ManualsPrinter.com Manuals 

Downloaded From ManualsPrinter.com Manuals 

10.TopAccess ADMINISTRATION TAB PAGE 
- SETUP MENU (Printing Function)
This chapter describes the various items set by the TopAccess administrator.
Setting up Device Settings.....................................................................................83
Setting up the device information ...................................................................................................... 84
Setting up the energy save...

Setting up the NetWare print ........................................................................................................... 114
Displaying Version Information ........................................................................... 115
Downloaded From ManualsPrinter.com Manuals 

Setting up Device Settings    83
Setting up Device Settings
In the General submenu page in the Setup menu, an administrator can configure the general 
settings such as Device Information, Energy Save, Date and Time, and Web General Setting.
Some settings may not apply to the LCD of this equipment as soon as you save the settings.  
The settings will be updated by pressing the [FUNCTION CLEAR] button on the Control Panel 
or after an Auto Clear time period.
Setting the device settings
1Access TopAccess in...

10 TopAccess ADMINISTRATION TAB PAGE - SETUP 
MENU (Printing Function)
84    Setting up Device Settings
4Click [Save].
The confirmation dialog box appears.
If you want to restore the current settings without saving the changes, click [Cancel].  
Clicking [Cancel] cannot restore the defaults.  This can only clear the changes and 
restore the current settings before saving the changes.
5Click [OK] to apply the changes.
When using the Internet Explorer, the settings that are displayed in each field may not...

Setting up Device Settings    85
7) Administrator’s Password
If you want to change the administrator’s password used to log in functions from the TopAc-
cess, enter a new password.  You can enter alphanumeric letters of 6 or more and 10 or less 
for the administrator’s password.  You cannot leave this field blank.
8) Confirm Password
Enter a new password that you entered in the “Administrator’s password” field.
Setting up the energy save
You can set the time to enter the Auto Clear, Auto Power Save and...

10 TopAccess ADMINISTRATION TAB PAGE - SETUP 
MENU (Printing Function)
86    Setting up Network Settings (Printing Function)
Setting up Network Settings (Printing Function)
In the Network submenu page in the Setup menu, an administrator can configure the network 
settings such as TCP/IP, IPX/SPX, AppleTalk, Bonjour, DNS Session, DDNS Session, NetWare 
Session, HTTP Network Service, and SNMP Network Service.
Setting the network settings
1Access TopAccess in the administrator mode.
	 P.50 “Accessing...

Setting up Network Settings (Printing Function)    87
4Click [Set].
The confirmation dialog box appears.
If you want to restore the current settings without saving the changes, click [Cancel].  
Clicking [Cancel] cannot restore the defaults.  This can only clear the changes and 
restore the current settings before saving the changes.
5Click [OK] to save the settings and close the sub window.
6Click [Save].
The confirmation dialog box appears.
7Click [OK] to apply the changes.
This equipment starts...

10 TopAccess ADMINISTRATION TAB PAGE - SETUP 
MENU (Printing Function)
88    Setting up Network Settings (Printing Function)
Setting up the TCP/IP
You can set the TCP/IP protocol to enable communication over TCP/IP.  The TCP/IP must be 
configured to enable TopAccess, Raw TCP or LPR printing, and IPP printing.
1) Address Mode
Select how to set the IP address.
-Static IP — Select this to assign the static IP address manually.  When this is selected, 
enter the static IP address in the IP Address field....