Tone Commander 6210, 6220 User Manual

48Tone Commander 6210/6220 User Manual
Version   ________________________________
Use this option to view the telephone’s hardware version, software
version, and serial number.
From the Administration Options menu, select VERS.
(Setup → ADMIN
 → VERS)
Serial Number
Select SERIAL.
Hardware Version
Select H/W.
Software Version
Select S/W.
        VERSION
SERIAL H/W   S/W  6030X
MODEL: 6220T
TOP: -01A     PCB: -02B
SERIAL# 90108307001
S/W VERSION: 01.04.01 

Tone Commander 6210/6220 User Manual49
Optional Equipment Version
Select 6030X, 6001TA, 6002TA, or other installed option.
Press the Done key to return to the Administration Options
menu or the Setup key to exit Setup Mode.
Done
MODEL:6030X BUTTON EXPAN
VERSION: 01.01.04 

50Tone Commander 6210/6220 User Manual
Test   ___________________________________
Select this option to test the LCD display, LED indicators, and keys.
From the Administration Options menu, select TEST.
(Setup → ADMIN
 → TEST)
Display and LED Indicators
Select DISPLY.
LCD Display
Select LCD.
All pixels (picture elements, or dots) on the display should turn
dark.
Press any key to return the display to normal operation.
LED Indicators
Select RED to turn on all red indicators, and turn all others off....

Tone Commander 6210/6220 User Manual51
Keys
Select KEYS.
Press each key on the telephone (not on the expansion
module), including the dial pad keys, one at a time.
A letter should appear in the display for each pressed key.
On 6210 models, 10 additional letters will appear after the first
keypress, representing the 10 “missing” multifunction keys.
If all keys are operational, the following display will be shown.
Press key to return to the Test menu.
If any key fails, or to exit before testing all keys,...

52Tone Commander 6210/6220 User Manual
After all keys have been tested, press any key to exit the test.
You can also exit the test at any time by pressing the Done
key to return to the Test menu or the Setup key to exit Setup
Mode.
Diagnostic Display   ______________________
From the Administration Options menu, select.
(Setup → ADMIN
 → DIAG)
The display will show the states of layers 1, 2, and 3, the
Terminal Endpoint Identifier, and the network switch type.
Press the Done key to return to the...

Tone Commander 6210/6220 User Manual53
Viewing the Error and Download Logs   ______
From the Administration Options menu, select LOG.
(Setup → ADMIN
 → More
4 → LOG)
Select ERROR to view the error log or PARAM (National
ISDN only) to view the Parameter Download log.
The most recent log entry will be shown.
Press the More
4key to view previous entries.
Press the Done key to return to the View Log Entries menu or
the Setup key to exit Setup Mode.
Clearing Logs
Select CLEAR to remove all entries from the...

54Tone Commander 6210/6220 User Manual
User Options
The following personal preference options can be changed from the
User Options menu:
• Time and Date• Handset/Headset Mode
•  Speed Dial Keys•  Preset Volume Levels
• Call Directory• Display Contrast
• Personal Ringing•  Call Log Password
• Call Preference
User Options Menu   ______________________
You can enter the User Options menu when the phone is idle or during
an active call.
Press the Setup key.
Select USER.
When Æ appears in the top line of the...

Tone Commander 6210/6220 User Manual55
Setting the Time and Date   ________________
From the User Options menu, select CLOCK.
(Setup → USER
 → CLOCK)
The current time and date will be displayed, with the cursor
flashing on the first digit.
Enter new digits for the date and time with the dial pad. The
cursor will advance automatically as each digit is entered.
Time must be entered in 12-hour format. AM/PM is changed
with a softkey.
If you need to make corrections, select 
ÅBKSP (backspace)
to move the...

56Tone Commander 6210/6220 User Manual
Speed Dial Programming
From the User Options menu, select SPDIAL.
(Setup → USER
 → SPDIAL)
The current state of each multifunction key is shown by the its
status indicator.
Green– unused key, available for speed dial use.
Red– Speed Dial key that has already been 
programmed.
Off– key set up for a call appearance, feature 
activator, or DSS.
On the phone or expansion module, press a lit key to program
it for speed dialing.
The selected key’s indicator will...

Tone Commander 6210/6220 User Manual57
Setting Up the Call Directory _______________
Up to 36 numbers can be stored in the Call Directory. Directory entries
are similar to Speed Dial keys, but are accessed from a display menu.
Place your most frequently-dialed numbers on Speed Dial keys, if
available, and put other numbers in the directory.
Directory entries are displayed on nine screen pages, with four entries
per page. The current directory page number (1-9) will be shown at the
upper right corner of...