Tone Commander 524 Installation Instructions

Music on Hold..........onoroff(selectable per line)
Special Feature Keys......Page (may be assigned to any spare line key)
Attendant Programmable Features
Ring Delays...........1-9rings, no delay, or no ringing
(selectable per line and per station)
Autodial Numbers........24digits (selectable per station)
Line Identification Display....14alphanumeric characters
(selectable per line and per station)
Programming Data Retention
Data Retention.........10years
13-102408 Rev. HPage 51
Tone Commander 524...

Maintenance
After initial installation, the 524 requires little or no maintenance, as long as adherence to the criteria
discussed in the Site Preparation
section is maintained. In this effort the following guidelines are
suggested:
DONT allow stored items to accumulate around the CPU, and therefore cut off adequate ventilation.
DONT store toxic or fume producing janitorial supplies or chemicals in the near vicinity of the CPU.
DONT plug any other electrical products into the same circuit as the CPU, even...

Service
Repair of the Tone Commander 524 must be done by Tone Commander. Prior to equipment removal, call
Tone Commander Technical Support for assistance in determining the source of the problem. This critical
action can often prevent needless removal of equipment and subsequent customer inconvenience.
Tone Commander
Technical Support Department
11609 49th Place West
Mukilteo, WA 98275-4255 USA
Phone: (800) 524-0024
(425) 349-1000
Fax: (425) 349-1010
E-mail: [email protected]
Web:...

FCC Requirements
The Tone Commander Model524complies with Part 68 of the FCC Rules. The label affixed to this
equipment contains, among other information, the FCC Registration Number and Ringer Equivalence
Number (REN) for this equipment. You must, upon request, provide this information to your telephone
company.
The REN is useful to determine the quantity of devices you may connect to your telephone line and still
have all of those devices ring when your telephone number is called. In most, but not all...

Industry Canada Requirements
The Industry Canada label identifies certified equipment. The certification means that the equipment meets
certain telecommunications network protective, operational and safety requirements. Industry Canada does
not guarantee the equipment will operate to a users satisfaction.
Before installing this equipment, make sure you are permitted to connect it to the facilities of the local
telecommunications company. You must also install the equipment using an acceptable method of...

Page 5613-102408 Rev. H
Tone Commander 524 Installation Instructions 

524 Configuration Sheet
System Programmable Features
STATION
KEYFEATUREDIAL PAD
KEYSAVAILABLE
VALUESDEFAULT
VALUEACTUAL VALUE
A
‘ABANDON’
Ring Time2-9,02 - 9 sec,
10 sec5
B
‘RECALL’
Rings1-9,01 - 9 rings,
no recall3
C
‘DCP DIAL’
Sequence0, 1first, lastfirst
(0)
D
‘DIAL SPEED’6, 0slow (6 digits/sec),
fast (10 digits/sec)fast
(0)
E
‘PAUSE’ Time2-9200 - 900 msec700
F
‘FLASH’ Time5-9,0500 - 900 msec,
1 sec600
G
Dial Tone
‘DETECT’
Time1-9,
0500, 600, 700 msec,
1, 1.2, 1.5, 1.8, 2 sec700
H
‘HOLD’
Recall...

524 Configuration Sheet
Line Programmable Features
(Default settings for all lines are shown inBOLD ITALICS.)
LINE
KEY
NO.LINE NAME I.D.
or
PAGE KEYPRIV.
WHEN
BUSYMUSIC
ON
HOLDANS.
USERING
DELAY
(NO
RINGING,
NO
DELAY,
1-9
RINGS
)
TELEPHONE
NUMBERS
O
F
FO
NO
F
FO
NO
F
FO
N
1
2
3
4
5
Page 5813-102408 Rev. H
Tone Commander 524 Installation Instructions 

524 Configuration Sheet
DSS Keys
DSS keys are numbered vertically on the console.
DSS
KEYSTATION
NUMBERUSER NAMEDSS
KEYSTATION
NUMBERUSER NAME
1
13
2
14
3
15
4
16
5
17
6
18
7
19
8
20
9
21
10
22
11
23
12
24
13-102408 Rev. HPage 59
Tone Commander 524 Installation Instructions 

Page 6013-102408 Rev. H
Tone Commander 524 Installation Instructions