Tone Commander 1030/1560 Installation Instructions
Here you can view all the pages of manual Tone Commander 1030/1560 Installation Instructions. The Tone Commander manuals for Telephone are available online for free. You can easily download all the documents as PDF.
Page 31
13-102360 Rev. HPage 31 Tone Commander 1030/1560 Installation Instructions Figure 13 – 1030 Console Keys
Page 32
Page 3213-102360 Rev. H Tone Commander 1030/1560 Installation Instructions Figure 14 – 1560 Console Keys
Page 33
Programming System-Wide Features Timing Parameters and Night Service Mode Press HOLD, then TRANSFER, then RELEASE, thenC(2) on the dial pad to enter configuration programming mode. CONFIGURE PROG will be displayed. Press a DSS key to select the feature to be programmed. The display will show the item name and the current value. The station status lamp will light steadily. Press a key on the dial pad if you want to change the value. The new value will be shown in the display. Press a DSS key to select...
Page 34
Timing values listed in the following tables are nominal, and may differ slightly from the actual values. Shaded values are factory defaults. Abandoned Ring Time Dial Pad Key Available Values 2 2 sec 3 3 sec 4 4 sec 5 5 sec 6 6 sec 7 7 sec 8 8 sec 9 9 sec 0 10 sec Table 7 Recall Rings Dial Pad Key Available Values 1 1 ring 2 2 rings 3 3 rings 4 4 rings 5 5 rings 6 6 rings 7 7 rings 8 8 rings 9 9 rings 0 no recall Table 8 Page 3413-102360 Rev. H Tone Commander 1030/1560 Installation Instructions DSS key...
Page 35
Pickup Code Sequence Dial Pad Key Available Values 0first (before station #) 1last (after station #) Table 9 Dialing Speed Dial Pad Key Available Values 6slow (6 digits/sec) 0fast (10 digits/sec) Table 10 Pause Time Dial Pad Key Available Values 2 200 ms 3 300 ms 4 400 ms 5 500 ms 6 600 ms 7 700 ms 8 800 ms 9 900 ms Table 11 13-102360 Rev. HPage 35 Tone Commander 1030/1560 Installation Instructions DSS key to select feature:C Default value:first This parameter determines when the console inserts the...
Page 36
Hookflash Time(Standard Version) Dial Pad Key Available Values 5 500 ms 6 600 ms 7 700 ms 8 800 ms 9 900 ms 0 1 sec Table 12a Hookflash Time(Lucent 5ESS International Version) Dial Pad Key Available Values 1 100ms 2 300 ms 3 300 ms 4 400 ms 5 500 ms 6 600 ms 7 700 ms 8 800 ms 9 900 ms 0 1 sec Table 12b Page 3613-102360 Rev. H Tone Commander 1030/1560 Installation Instructions DSS key to select feature:F Default value:600 ms This parameter sets the length of a timed hookflash generated during call...
Page 37
Dial Tone Detect Time Dial Pad Key Available Values 1 500 ms 2 600 ms 3 700 ms 4 1 sec 5 1.2 sec 6 1.5 sec 7 1.8 sec 8 2 sec Table 13 Hold Recall Time Dial Pad Key Available Values 3 30 sec 4 40 sec 5 50 sec 6 60 sec 9 90 sec 1 2 min 2 3 min 0 no recall Table 14 13-102360 Rev. HPage 37 Tone Commander 1030/1560 Installation Instructions DSS key to select feature:G Default value:700 ms This sets the time steady dial tone must be present before station digits are autodialed. Set this parameter to the lowest...
Page 38
Hold Release Time Dial Pad Key Available Values 140ms 280ms 3 200 ms 4 400 ms 5 600 ms 6 800 ms 7 1 sec 8 2 sec Table 15 Night Bell Mode Dial Pad Key Available Values 1 lines only 2 lines + stations Table 16 Page 3813-102360 Rev. H Tone Commander 1030/1560 Installation Instructions DSS key to select feature:I Default value:600 ms A central office disconnect supervision signal (i.e., brief battery removal) on any line must exceed this value. When such a signal from a line on hold is detected, the line...
Page 39
Queue Priority Dial Pad Key Available Values 1 stations only 2 stations, then lines 3 lines, then stations 4 FIFO Table 17 Alert Type Dial Pad Key Available Values 1 normal ringing 2 distinctive ringing 0 both Table 18 Ringing Type Dial Pad Key Available Values 1 long 0 short Table 19 13-102360 Rev. HPage 39 Tone Commander 1030/1560 Installation Instructions DSS key to select feature:L Default value:both To ignore station-to-station calls, equip the station lines with distinctive ringing from the C.O....
Page 40
Camp-on Dial Pad Key Available Values 0 off *on Table 20 Unsupervised Call Transfer Dial Pad Key Available Values 1 1 sec 2 2 sec 3 3 sec 4 4 sec 5 5 sec 6 6 sec 7 7 sec 8 8 sec 9 9 sec 0off Table 21 Page 4013-102360 Rev. H Tone Commander 1030/1560 Installation Instructions DSS key to select feature:W Default value:off This feature disconnects the console from a transferred call after the timeout period. This facilitates call transfer to an unmonitored station or a station that forwards calls on busy,...