TomTom Via 16 2 Reference Manual

							91 
 
 
 
Street Name 
Select this option to correct an incorrect street name. 
1. Press and hold to select the location of the map change on the map view. 
2. Select the pop-up menu button to open the menu. 
3. Select Report Map Error from the pop-up menu. 
4. Select Street Name. 
5. Enter the correct street name. 
6. Select Report. 
Turn Restriction 
Select this option to report incorrect road turn restrictions. 
1. Press and hold to select the location of the map change on the map view. 
2. Select the pop-up menu button to open the menu. 
3. Select Report Map Error from the pop-up menu. 
4. Select Turn Restriction. 
5. If the incorrect junction is shown, select Select another junction.  
6. Select the approach direction. 
The map rotates so that the direction you are coming from is shown at the bottom of the 
screen. 
7. Select the traffic signs in turn to change the turn restrictions for each road at the junction. 
 
8. Select Report. 
Speed Limit 
Select this option to correct the speed limit on the map.  
1. Press and hold to select the location of the map change on the map view. 
2. Select the pop-up menu button to open the menu. 
3. Select Report Map Error from the pop-up menu. 
4. Select Speed Limit. 
5. Select the correct speed limit.  
If the correct limit is not shown, scroll left or right through the available speed limits.  
6. Select Report.  
						

							92 
 
 
 
About speed cameras 
The Speed Cameras service warns you about the following camera locations: 
 Fixed speed camera locations. 
 Mobile speed camera locations. 
 Mobile speed camera hotspots. 
 Average speed camera locations. 
 Speed enforcement zones. 
 Red light camera locations. 
 Traffic restriction cameras. 
The Speed Cameras service also warns you about the following safety hazards: 
 Accident blackspot locations. 
To get TomTom services on your VIA, you must be connected to TomTom services and logged in to a 
TomTom account.  
Note: TomTom services are not available on all VIA devices. 
Note: Some TomTom services might not be available in your current location. 
 
Crossing into another area or country 
When you drive into an area or country that does not permit speed camera warnings, your VIA 
switches the speed cameras service off. You will not receive speed cameras warnings in those areas 
or countries. 
Some areas or countries permit limited speed camera warnings, for example only warnings for fixed 
cameras, or warnings for risk zones. Your VIA automatically switches to give limited warnings when 
you cross into those areas or countries.  
Speed camera warnings 
Speed camera warning sounds are played for the most common types of speed camera. 
Warnings are given as you approach a speed camera. You are warned in several ways: 
 A symbol is shown in the route bar and on your route on the map. 
 Your distance to the speed camera is shown in the route bar. 
 You hear a warning sound as you get near the camera. 
 While you are approaching a camera or driving in an average speed check area, your speed is 
monitored. If you drive more than 5 km/h or 3 mph over the speed limit the route bar turns red. 
If you drive less than 5 km/h or 3 mph over the speed limit the route bar turns orange. 
Tip: In the map view or guidance view, you can select a speed camera symbol in the route bar to 
see the type of camera, the maximum speed and also the length of an average speed check area. 
In the map view, you can also select a speed camera that is shown on your route. 
Speed Cameras  
						

							93 
 
 
 
Symbol shown on 
map 
Symbol shown in 
route bar 
Description 
   
Fixed speed camera - this type of camera 
checks the speed of passing vehicles and is fixed 
in one place. 
   
Mobile speed camera - this type of camera 
checks the speed of passing vehicles and can be 
moved to different locations. 
   
Mobile speed camera hotspots - this type of 
warning shows places where mobile cameras are 
often used. 
   
Average speed cameras - these types of 
cameras measure your average speed between 
two points. You are warned at the start and end 
of the average speed check area. 
While you are driving in an average speed check 
area, your average speed is shown, instead of 
your current speed. The distance to the end of 
the area is shown in the route bar. 
   
Speed enforcement zones - these zones can 
contain multiple speed cameras.  
You are warned at the start and end of a speed 
enforcement zone. While you are driving in a 
speed enforcement zone, your current speed is 
shown, and a visual warning is shown in the 
route bar. 
  
 
Red light camera - this type of camera checks 
for vehicles breaking traffic rules at traffic 
lights. There are two types of traffic light 
camera - those which check if you drive through 
a red light and those which check for driving 
through a red light together with speeding. 
   
Traffic restriction - this type of warning warns 
you about restricted roads. 
   
Accident blackspot - this type of warning is 
given for a place where road traffic accidents 
have historically been concentrated.  
You are warned at the start and end of the 
accident blackspot. While you are driving in an 
accident blackspot, your current speed is shown 
and a visual warning is shown in the route bar.   
						

							94 
 
 
 
Changing the way you are warned 
To change the way you are warned about speed cameras, select the Sounds and Warnings button in 
the Settings menu. 
 
You can then set how you want to be warned for the different types of cameras and safety hazards. 
You can change settings for whether you want to be warned, never warned or warned only if you 
are speeding. 
For example, to change how you are warned when you approach a fixed speed camera, do the 
following: 
1. Select Sounds & Warnings in the Settings Menu. 
2. Select Cameras. 
3. Select Fixed cameras. 
4. Select one of the following warning options: 
 Always. 
 Only when speeding. 
 Never. 
5. Select the back button. 
Tip: To turn off all audible warnings, select Settings, followed by Sounds & Warnings and then 
switch off Speed camera warnings. 
 
Reporting a new speed camera 
If you pass a new speed camera that you were not warned about, you can report it instantly. 
Note: To report a speed camera, you must be connected to TomTom services and logged in to 
your TomTom account. 
You can report a speed camera in two ways: 
Using the quick menu to report a speed camera 
1. Select the current location symbol or the speed panel in the guidance view. 
2. Select Report Speed Camera from the pop-up menu. 
You see a message thanking you for adding the camera. 
Tip: If you make a mistake when reporting a camera, select Cancel in the message. 
The speed camera is saved on your VIA automatically and also sent to other users. 
 
Using the Main Menu to report a speed camera 
1. Select the Main Menu button to open the Main Menu. 
  
						

							95 
 
 
 
2. Select Report Speed Camera. 
 
You see a message thanking you for adding the camera. 
Tip: If you make a mistake when reporting a camera, select Cancel in the message. 
The speed camera is saved on your VIA automatically and also sent to other users.  
Confirm or remove a mobile speed camera 
You can confirm the presence of a mobile speed camera or remove a mobile speed camera if it is no 
longer present. 
Just after you pass a mobile speed camera, in the route bar you are asked if the camera was still 
there. 
 Select Yes if the mobile speed camera is still there. 
 Select No if the mobile speed camera has been removed. 
Your selection is sent to TomTom. We collect reports from many users to determine if the camera 
warning should be kept or removed.  
Updating locations for cameras and hazards 
The locations of speed cameras can change frequently. New cameras can also appear without 
warning and the locations for other hazards, such as accident blackspots, may also change. 
When connected to TomTom services, your TomTom VIA receives all camera updates for fixed and 
mobile camera locations in real time. You do not need to do anything to receive updates – they are 
sent to your VIA automatically.  
						

							96 
 
 
 
About danger zones and risk zones 
The Danger Zones service warns you about danger zones and risk zones on your route when you are 
in France. 
Since 3rd January 2012, it has been illegal to receive warnings about the position of fixed or mobile 
speed cameras when you are driving in France. To be compliant with this change in French law, 
speed camera locations are no longer reported but instead areas of danger are indicated as danger 
zones and risk zones. 
Important: Outside of France, you receive warnings about speed cameras. Inside France, you 
receive warnings about danger zones and risk zones. When you cross the border, the type of warning 
you receive changes. 
A danger zone is a zone specified by French law. A risk zone is a temporary danger zone reported by 
users. The Danger Zones service warns you about both danger zones and risk zones in the same way. 
Danger zones and risk zones may or may not contain one or more speed cameras or a range of other 
driving hazards: 
 Specific locations are not available and a danger zone icon is shown instead as you approach the 
zone. 
 The minimum length of the zone depends on the road type and is 300 m for roads in built-up 
areas, 2000 m (2 km) for secondary roads and 4000 m (4 km) for motorways. 
 The location of one or more speed cameras, if any, can be at any point within the zone. 
 If two danger zones are close to each other, the warnings can be merged into a single longer 
zone. 
Information about the location of zones is continually updated by TomTom and other users and 
frequently sent to your VIA so that you always have the latest information. You can also contribute 
by reporting new risk zone locations. 
To get TomTom services on your VIA, you must be connected to TomTom services and logged in to a 
TomTom account. 
Note: You cannot remove a danger zone or a risk zone. 
Note: TomTom services are not available on all VIA devices. 
Note: Some TomTom services might not be available in your current location. 
 
Crossing into another area or country 
When you drive into an area or country that does not permit speed camera warnings, your VIA 
switches the speed cameras service off. You will not receive speed cameras warnings in those areas 
or countries. 
Some areas or countries permit limited speed camera warnings, for example only warnings for fixed 
cameras, or warnings for risk zones. Your VIA automatically switches to give limited warnings when 
you cross into those areas or countries.  
Danger zone and risk zone warnings 
Warnings are given 10 seconds before you reach a danger zone or risk zone. You are warned in 
several ways: 
Danger Zones  
						

							97 
 
 
 
 A symbol is shown in the route bar and on your route on the map. 
 Your distance to the start of the zone is shown in the route bar.  
 You hear a warning sound as you get near the start of the zone. 
 While you are approaching a zone or driving in a zone, your speed is monitored. If you drive 
more than 5 km/h or 3 mph over the speed limit the route bar turns red. If you drive less than 5 
km/h or 3 mph over the speed limit the route bar turns orange. 
 While you are driving in a zone your distance to the end of the zone is shown in the route bar. 
Warning sounds are played for these types of zones: 
Symbol shown on 
map 
Symbol shown in 
route bar 
Description 
   
Danger zone - this type of warning is only given in 
France. 
You are warned at the start and end of the danger 
zone. 
   
Risk zone - this type of warning is only given in 
France. 
You are warned at the start and end of the risk 
zone. 
You can change the way you are warned about danger and risk zones.  
Changing the way you are warned 
To change the way you are warned about danger zones, select the Sounds and Warnings button in 
the Settings menu. 
 
You can change settings for whether you want to be warned or not. 
For example, to change how you are warned when you approach a danger zone, do the following: 
1. Select Sounds & Warnings in the Settings Menu. 
2. Select Hazards. 
3. Select Danger zones. 
4. Select one of the following warning options: 
 Always. 
 Only when speeding. 
 Never. 
5. Select the back button. 
Tip: To turn off all audible warnings, select Settings, followed by Sounds & Warnings and then 
switch off Warning sounds. 
 
Reporting a risk zone 
If you pass a new temporary risk zone that you were not warned about, you can report it instantly. 
Note: To report a risk zone, you must be connected to TomTom services and logged in to your 
TomTom account.  
						

							98 
 
 
 
If a new temporary risk zone is reported directly before or after an existing risk or danger zone, 
then the new zone is added to the existing zone. 
If enough Danger Zones users report a new risk zone, that zone may become a danger zone and be 
available for all subscribers. 
You can report a risk zone in two ways: 
Using the quick menu to report a risk zone 
1. Select the current location symbol or the speed panel in the guidance view. 
2. Select Report Risk Zone from the pop-up menu. 
You see a message thanking you for adding the risk zone. 
Tip: If you make a mistake when reporting a risk zone, select Cancel in the message. 
The risk zone is saved on your VIA automatically and also sent to other users. A reported risk zone 
stays on your device for three hours. 
 
Using the Main Menu to report a risk zone 
1. Select the Main Menu button to open the Main Menu. 
 
2. Select Report Risk Zone. 
 
You see a message thanking you for adding the risk zone. 
Tip: If you make a mistake when reporting a risk zone, select Cancel in the message. 
The reported risk zone is shown on your map and also sent to other users. A reported risk zone stays 
active for three hours.  
Updating locations for danger zones and risk zones 
The locations of danger zones and risk zones can change frequently. New zones can also appear 
without warning. 
Your TomTom VIA receives all zone updates in real time. You do not need to do anything to receive 
updates – they are sent to your VIA automatically.  
						

							99 
 
 
 
About My Places 
My Places provides an easy way to select a location without the need to search for the location each 
time. You can use My Places to create a collection of useful or favourite addresses. 
Tip: The terms favourite and place mean the same thing - favourites are places that you go to 
often. 
The following items are always in My Places: 
 Home - Your home location can be your home address or somewhere you often visit. This 
feature provides an easy way to navigate there. 
 Work - Your work location can be your workplace address or somewhere you visit often. This 
feature provides an easy way to navigate there. 
 Recent destinations - Select this button to select your destination from a list of locations you 
have recently used as destinations. These also include your stops. 
 Marked locations - You can mark a location and temporarily add it to My Places. 
You can add a location to My Places directly in My Places, by selecting a location from the map, by 
searching for a location or by marking a location. 
Your home location, work location, marked locations and the locations that you have added appear 
in a list in My Places and are shown with a marker on the map. 
 
 
Setting your home and work locations 
You can set your home and work locations in the following ways: 
Setting your home or work location using My Places 
1. In the Main Menu, select My Places. 
2. Select Add Home or Add Work. 
3. To select a location for home or work, do one of the following: 
My Places  
						

							100 
 
 
 
 Zoom in on the map at the location you want to select. Press and hold to select the loca-
tion, then select the home or work location symbol. 
 
 Select the Search button and search for a location. Select a location to set as home or work. 
Select Set home location or Set work location. 
Setting your home or work location using the map 
1. In the Map View, move the map and zoom in until you can see your home or work location. 
2. Select the location by pressing and holding the screen for about one second. 
A pop-up menu shows the nearest address. 
1. Open the pop-up menu and select Add to My Places. 
2. In the name bar, enter the name Home or Work. 
Note: Home must have a capital letter H and Work must have a capital letter W. 
3. Select Add. 
Your home or work location is shown on the map.  
Changing your home location 
You can change your home location in the following ways. 
Changing your home location using My Places 
1. In the Main Menu, select My Places. 
2. Select Home. 
Your home location is shown on the map, with a pop-up menu. 
 
3. Select Edit Location. 
4. To select a new home location, do one of the following: 
 Zoom in on the map at the location you want to select. Press and hold to select the loca-
tion, then select the home location symbol. 
 Select the Search button and search for a location. Select a location to set as home. Select 
Set home location. 
Changing your home location using the map 
1. In the Map View, move the map and zoom in until you can see your new home location. 
2. Select the location by pressing and holding the screen for about one second. 
A pop-up menu shows the nearest address.