Tenda Router W311R User Manual

                          11N Wireless Broadband Router 
 
46
as HTTP service. 
¾ IP Starting Address: The first IP address for 
traffic control. 
¾ IP Ending Address: The last IP address for traffic 
control. 
¾ Uploading/Downloading: To specify the traffic 
heading way for the selected IP addresses: 
uploading or downloading. 
¾ Bandwidth: To specify the uploading/downloading 
Min. /Max. Traffic speed (KB/s), which can not 
exceed the WAN speed. 
¾ Apply: To enable the current editing rule. If not,...

                          11N Wireless Broadband Router 
 
47
Chapter 10 Security Settings 
 
10.1 Client Filter Settings 
 
To benefit your further management to the computers 
in the LAN, you can control some ports access to 
Internet by data packet filter function. 
 
 
 
¾ Client Filter: Check to enable client filter.   
¾ Access Policy: Select one number from the 
drop-down menu. 
¾ Enable: Check to enable the access policy.   
¾ Clear the Policy: Click “Clear” button to clear all 
settings for the...

                          11N Wireless Broadband Router 
 
48
¾ Filter Mode: Click one radio button to enable or 
disable to access the Internet. 
¾ Policy Name: Enter a name for the access policy 
selected.  
¾ IP Start/End: Enter the starting/ending IP 
address. 
¾ Port No: Enter the port range based over the 
protocol for access policy. 
¾ Protocol: Select one protocol (TCP/UDP/Both) 
from the drop-down menu.  
¾ Times: Select the time range of client filter.   
¾ Date: Select the day(s) to run the...

                          11N Wireless Broadband Router 
 
49
10.2 URL Filter Settings 
 
In order to control the computer to have access to 
websites, you can use URL filtering to allow the 
computer to have access to certain websites at fixed 
time and forbids it having access to certain websites at 
fixed time. 
 
 
 
 
¾ URL Filter: Check to enable URL filter. 
¾ Access Policy: Select one number from the 
drop-down menu. 
¾ Enable: Check to enable the access policy. 
¾ Clear the Policy: Click “Clear”...

                          11N Wireless Broadband Router 
 
50
disable to access the Internet. 
¾ Policy Name: Enter a name for the access policy 
selected. 
¾ Start/End IP: Enter the starting/ending IP 
address. 
¾ URL Strings:   Specify the text strings or keywords 
needed to be filtered. If any part    of  the  URL 
contains these strings or words, the web page will 
not be accessible and displayed. 
¾ Times: Select the time range of client filter. 
¾ Date: Select the day(s) to run the access policy....

                          11N Wireless Broadband Router 
 
51
10.3 MAC Address Filter 
 
In order to manage the computers in LAN better, you 
could control the computer’s access to Internet by MAC 
Address Filter. 
 
 
 
¾ MAC Address Filter: Check to enable MAC 
address filter. 
¾ Access Policy: Select one number from the 
drop-down menu. 
¾ Enable: Check to enable the access policy. 
¾ Clear the Policy: Click “Clear” button to clear all 
settings for the policy. 
¾ Filter Mode: Click one radio button...

                          11N Wireless Broadband Router 
 
52
¾ MAC Address: Enter the MAC address you want to 
run the access policy. 
¾ Times: Select the time range of client filter. 
¾ Date: Select the day(s) to run the access policy. 
¾ Apply: Click to make the settings go into effect. 
 
For example:   
If you want to configure the host with MAC address 
00:C0:9F:AD:FF:C5 not to access the Internet at 
8:00-18:00, you need to set it as above. 
 
 
10.4 Prevent Network Attack 
 
This section is to...

                          11N Wireless Broadband Router 
 
53
10.5 Remote Web Management 
 
This section is to allow the network administrator to 
manage the Router remotely. If you want to access the 
Router from outside the local network, please select the 
“Enable”. 
 
 
 
¾ Enable: Check to enable remote web 
management. 
¾ Port: The management port open to outside 
access. The default value is 80. 
¾ WAN IP Address: Specify the range of the WAN IP 
address for remote management. 
 
Note: 
1. If you...

                          11N Wireless Broadband Router 
 
54
2. If your WAN IP address starts and ends with 
0.0.0.0, it means all hosts in WAN can implement 
remote Web management. If you change the WAN 
IP address as 218.88.93.33-218.88.93.35, then 
only the IP addresses as 218.88.93.33, 
218.88.93.34 and 218.88.93.35 can access the 
Router. 
 
For example:   
If you want to configure the IP address 218.88.93.33 to 
access the device’s web interface, please set it as 
above. 
  
 
10.6 WAN Ping 
 
The...

                          11N Wireless Broadband Router 
 
55
Chapter 11 Routing Settings 
 
11.1 Routing Table 
 
The main duty for a router is to look for a best path for 
every data frame, and transfer this data frame to a 
destination. So, it’s essential for the router to choose 
the best path, i.e. routing arithmetic. In order to finish 
this function, many transferring paths, i.e. routing table, 
are saved in the router, for choosing when needed.