Tenda Router W311R User Manual

                          11N Wireless Broadband Router 
 
36
to establish the connection.   
Bridge: You can wirelessly connect two or more wired 
networks via this mode. In this mode, you need to add 
the Wireless MAC address of the connecting device into 
the Routers AP MAC address table or select one from 
the scanning table. 
Repeater Mode:In this mode, add the opposing MAC 
address into each own AP MAC address table by manual 
or scanner to enlarge and extend the wireless radio. 
Encrypt Type:...

                          11N Wireless Broadband Router 
 
37
6.6 Wireless Access Control 
 
To secure your wireless LAN, the wireless access control 
is actually based on the MAC address management to 
allow or block the specific clients to access the wireless 
network. Select “Wireless Setting->Access Control” to 
display the following screen: 
 
 
 
¾ MAC Address Filter: Enable/disable MAC address 
filter. Select “Close” to malfunction MAC address; 
“disable” to prevent the MAC addresses in the list...

                          11N Wireless Broadband Router 
 
38
6.7 Connection Status 
 
This page shows wireless client’s connection status, 
including MAC address, Channel bandwidth, etc. Select 
“Wireless Setting->connection status” to enter the 
following screen: 
 
 
 
¾ MAC Address: Shows current MAC addresses of 
the hosts connecting to the Router. 
¾ Bandwidth: Shows current bandwidth of the hosts 
(wireless client). 
 
  

                          11N Wireless Broadband Router 
 
39
Chapter 7 DHCP Server 
 
7.1 DHCP Settings 
 
DHCP (Dynamic Host Control Protocol) is to assign an IP 
address to the computers on the LAN/private network. 
When you enable the DHCP Server, the DHCP Server will 
allocate automatically an unused IP address from the IP 
address pool to the requesting computer in premise of 
activating “Obtain an IP Address Automatically”. So 
specifying the starting and ending address of the IP 
Address pool is...

                          11N Wireless Broadband Router 
 
40
7.2 DHCP List and Binding 
The Static IP assignment is to add a specifically static IP 
address to the assigned MAC address. You can view the 
related information in the DHCP server list.   
 
 
 
¾ IP Address: Enter the IP address which needs to 
be bound.   
¾ MAC Address:   Enter the MAC address of the 
computer you want to assign the above IP address. 
Click “Add” to add the entry in the list.   
¾ Hostname: The name of the computer which...

                          11N Wireless Broadband Router 
 
41
Chapter 8 Virtual Server 
 
8.1 Port Range Forwarding 
 
This section deals with the port range forwarding mainly. 
The Port Range Forwarding allows you to set up a range 
of public services such as web servers, ftp, e-mail and 
other specialized Internet applications to an assigned IP 
address on your LAN. 
 
 
 
¾ Start/End Port: Enter the start/end port number 
which ranges the External ports used to set the 
server or Internet applications.  

                          11N Wireless Broadband Router 
 
42
¾ IP Address: Enter the IP address of the PC where 
you want to set the applications. 
¾ Protocol: Select the protocol (TCP/UDP/Both) for 
the application. 
¾ Delete/Enable: Click to check it for corresponding 
operation. 
¾ Well-Known Service Port: Select the well-known 
services as DNS, FTP from the drop-down menu to 
add to the configured one above. 
¾ Add: Add the selected well-known port to the 
policy ID. 
For example:  
The server at IP...

                          11N Wireless Broadband Router 
 
43
8.2 DMZ Settings 
The DMZ function is to allow one computer in LAN to be 
exposed to the Internet for a special-purpose service as 
Internet gaming or videoconferencing. 
 
 
 
¾ DMZ Host IP Address: The IP address of the 
computer you want to expose. 
¾ Enable: Click the checkbox to enable the DMZ 
host. 
 
For example:   
Set the computer at IP address of 192.168.0.10 as DMZ 
host to connect another host in the Internet for...

                          11N Wireless Broadband Router 
 
44
software that supports UPnP. With the UPnP function, 
host in LAN can request the router to process some 
special port switching so as to enable host outside to 
visit the resources in the internal host. 
 
 
 
¾ Enable UPnP: Click the checkbox to enable the 
UPnP. 
        
  

                          11N Wireless Broadband Router 
 
45
Chapter 9 Traffic Control 
 
9.1 Traffic Control 
 
Traffic control is used to limit communication speed in 
the LAN and WAN. Up to 20 entries can be supported 
with the capability for at most 254 PCs speed control, 
including for IP address range configuration. 
 
 
 
¾ Enable Traffic Control: To enable or disable the 
internal IP bandwidth control. The default is 
disabled. 
¾ Interface: To limit the uploading and downloading 
bandwidth in...