Tenda Router W311R User Manual

                          11N Wireless Broadband Router 
 
66
Appendix 1 Glossary 
 
Channel:     
An instance of medium use for the purpose of passing 
protocol data units (PDUs) that may be used 
simultaneously, in the same volume of space, with other 
instances of medium use(on other channels) by other 
instances of the same physical layer (PHY),with an 
acceptably low frame error ratio(FER) due to mutual 
interference. 
 
SSID:        
SSID(Service Set Identifier) is the network name 
shared by all...

                          11N Wireless Broadband Router 
 
67
private.  Conversely, 104 and 128 bit are the 
same.  WEP uses a common KEY to encode the 
data.    Therefore, all devices on a wireless network must 
use the same key and same type of encryption.   There 
are 2 methods for entering the KEY; one is to enter a 
16-bit HEX digit.   Using this method, users must enter 
a 10-digit number (for 64-bit) or 26-digit number (for 
128-bit) in the KEY field.   Users must select the same 
key number for...

                          11N Wireless Broadband Router 
 
68
Appendix 2 Questions and Answers   
In this part some questions and problems shown during 
the Router’s usage and installation will be given 
suggesting answers. If your problems are not in the list, 
please log into our website www.tenda.cn
 or send an 
E-mail to [email protected]
, and we will reply you in 
the first time. 
   
 
1. Can not login to the Web interface of the Router after 
you enter the IP address in the address field? 
 
Step...

                          11N Wireless Broadband Router 
 
69
then repeat the ping operation. If it still does not work, 
please contact us. 
 
2.Forget the login password and can not enter the 
setting page. What can I do? 
 
Press the “RESET” button for 7 seconds to restore the 
Router to default settings. 
 
 
3.The computer connected with the Router shows IP 
address conflict. What can I do? 
 
Check if there are other DHCP servers in the LAN. If 
there have, disable them. The default IP address of...

                          11N Wireless Broadband Router 
 
70
5.How can I configure and access the Internet via 
Dynamic IP? 
 
In Setup Wizard of the Web utility interface, select 
“Dynamic IP” connection type and click “Save” to 
activate it. As some ISPs bind the user computer’s MAC 
address, you need to clone the Router’s WAN MAC 
address to the bind21ing PC’s MAC address. Select 
“MAC Address Clone” in “Advanced Setting” to input 
your computer’s MAC address and click “Apply” to 
activate it....

                          11N Wireless Broadband Router 
 
71
80. 
Step 5: Input the internal server’s IP address. If your 
Web server’s IP address is 192.168.0.10, please input 
it. 
Step 6: select the communication protocol used by your 
i n t e r n a l  h o s t :  T C P,  U D P,  I C M P.  
Step 7: click “Apply” to activate the settings. 
The following table has listed the well-known 
application and service port:   
 
Server Protocol Service Port 
WEB Server  TCP  80 
FTP Server  TCP  21 
Telnet TCP...