Tenda Router W311R User Manual

                          11N Wireless Broadband Router 
 
6
Back Panel Show: 
 
 
 
Rear Panel :( From L to R) 
¾ POWER 
The jack is for power adapter connection. Please 
  use the included 9V DC power adapter.   
¾ WAN 
A 100Mbps Ethernet port can be connected with 
MODEM, Switch, Router and other Ethernet device 
for Internet connecting to DSL MODEM, Cable 
MODEM and ISP. 
¾ LAN (1, 2, 3, 4) 
4 10/100Mbps Ethernet ports can be connected 
with Ethernet switch, Ethernet router and NIC card. 
¾ RESET...

                          11N Wireless Broadband Router 
 
7
Chapter 2 Product Installation 
 
2.1 Hardware Installation 
 
After you unpack the box, please follow the steps below 
to connect. For better wireless performance, please put 
the device in the middle of wireless coverage area. 
 
1. Please use the included power adapter to power on 
the Router. IMPORTANT: Use of a different power 
adapter could cause damage and void the warranty for 
this product. 
 
  
2. Please connect the LAN port of the...

                          11N Wireless Broadband Router 
 
8
 
 
3. Please connect your broadband line provided by your 
ISP to the WAN port. 
 
 
 
4. Insert the included CD-ROM into the CD-ROM drive, 
double click the “Setup” icon and follow the instructions 
to complete the installation. Or you can enter the 
Router’s Web page to configure it. (More details please 
refer to Chapter 3.) 
 
  

                          11N Wireless Broadband Router 
 
9
2.2 Network Application Plan 
 
Usually wireless LAN Network is deployed in a planned 
environment where each access point is located in a 
steady place with certain wireless coverage area for 
communication service. Generally speaking, it is in the 
center of the area to reduce “dead spot”. 
 
   

                          11N Wireless Broadband Router 
 
10
Chapter 3 How to Login to the Router 
 
The chapter mainly presents how to enter the Router’s 
Web page. After you have finished the hardware 
installation, the following steps will assist you to set the 
network configurations for you computer. 
 
  
3.1 How to Set the Network Configurations 
 
1. On your computer desktop right click “My Network 
Places” and select “Properties”.     
 
 
  

                          11N Wireless Broadband Router 
 
11
2. Right click “Local Area Network Connection” and 
select “Properties”. 
 
 
 
3. Select “Internet Protocol (TCP/IP)” and click 
“Properties”. 
 
  

                          11N Wireless Broadband Router 
 
12
4. Select “Obtain an IP address automatically” and 
“Obtain DNS server address automatically”. Click 
“OK” to save the configurations. 
 
 
 
Or select “Use the following IP address” and enter the IP 
address, Subnet mask, Default gateway as follows:   
IP Address: 192.168.0.XXX: (XXX is a number from 
2~254) 
Subnet Mask: 255.255.255.0 
Gateway: 192.168.0.1 
Certainly you need to input the DNS server address 
provided by your ISP. Otherwise,...

                          11N Wireless Broadband Router 
 
13
 
3.2 Login to the Router 
 
1. To access the Router’s Web-based interface, launch a 
web browser such as Internet Explorer or Firefox and 
enter the Router’s default IP address, 
http://192.168.0.1. Press “Enter”. 
 
  

                          11N Wireless Broadband Router 
 
14
2. Input the “admin” in both User Name and Password. 
Click “OK”. 
 
 
 
3. If you enter the correct user name and password, the 
screen will be the next one.   
 
  

                          11N Wireless Broadband Router 
 
15
 
Chapter 4 Quick Setup Guide 
 
This chapter deals with how to access the Internet 
quickly. Please follow this guide to connect your Router 
to the Internet. 
 
4.1 Setup Wizard 
 
Here is the “Welcome to Setup Wizard” for configuring 
your Router quickly. Click “Next”. 
 
 
 
In this screen, select one mode of your Internet 
connection you use. If you are not clear, press the 
“Detect” button or contact your Internet Service 
Provider, and...