Telrad Digital Avanti 3015 Set, 3000 Set User Guide

24 Avanti 3015 and Avanti 3000 sets
FORWARDING CALLS
You may program your telephone set to forward your calls 
to another extension.
To program call forwarding
1. If your set does not have DN buttons, 
skip to step 2. 
If you want to program forwarding for a specific DN, first 
press the desired DN button. 
If you want the calls on all the DNs at your set for-
warded to the same destination, you may do this in one 
step (provided you have authorization to do so and 
none of the DNs are restricted for...

Avanti 3015 and Avanti 3000 sets 25
5. Enter the new destination to which you want your calls 
forwarded.
 NOTE
Instead of dialin
g the extension number, you may 
press a MEMORY button pro
grammed with an 
extension number (for internal calls only) - or press 
a SPEED DIAL button (or press [SPEED DIAL]
 
and dial a SPEED DIAL memory bin number) for 
internal or external calls, as determined by the 
contents of the memory. Calls are forwarded to the 
contents of the MEMORY button or SPEED DIAL 
bin. If...

26 Avanti 3015 and Avanti 3000 sets
CANCELING CALL FORWARD TO ME
If another set has pro
grammed your telephone set as its 
forwardin
g destination and you do not wish to be disturbed 
by those calls, you can cancel your status as a call for-
wardin
g destination.
To cancel Call Forward to me
1. Press the CANCEL code [#].
2. Press [FEATURE].
3. Dial the CALL FORWARD access code [3][5].
4. Dial [8]
.
5. Dial the extension number whose calls you no lon
ger 
want forwarded to your set
or
Press [
*] 
if you...

Avanti 3015 and Avanti 3000 sets 27
ABBREVIATED DIALING
This section describes several ways of abbreviating dial-
in
g. Save/Repeat and Redial are described in Outside 
Calls, above.
SPEED DIAL
Speed dial shortens the procedure of dialin
g outside num-
bers by usin
g speed dial buttons and speed dial memories 
(called “bins”).
To speed dial an outside number
•Press [SPEED DIAL] 
and dial the speed dial bin code 
(three di
gits),
or
Press the appropriate SPEED DIAL button.
To program a speed dial memory...

28 Avanti 3015 and Avanti 3000 sets
MEMORY BUTTONS
Memory buttons are used for one-press dialin
g of exten-
sions and feature access codes.
To dial with a MEMORY button
• Press the pro
grammed button.
To program a MEMORY button
1. Press [FEATURE].
2. Press [PROGRAM]
.
3. Press the MEMORY button to be pro
grammed.
4. Dial the desired extension number (up to four di
gits) 
or 
Press [FEATURE]
 and then dial the desired feature 
code.
See the Feature codes table at the end of this 
guide.
5. Han
g up....

Avanti 3015 and Avanti 3000 sets 29
ALARM
Your telephone can sound an alarm ring at a pre-pro-
grammed time.
To program an alarm time
1. Press [FEATURE]
.
2. Dial the TIME ALARM access code ([8][2]
).
3. Dial the four-di
git alarm time (HH:MM) using the 24 
hour format (e.
g. 1530 for 3:30 pm).
4. Han
g up.
To cancel the alarm setting
Before the alarm rin
gs:
1. Press [#]
.
2. Press [FEATURE]
.
3. Dial the TIME ALARM access code ([8][2]
).
4. Han
g up.
To stop the alarm ring
•Press [SPKR] 
twice or lift...

30 Avanti 3015 and Avanti 3000 sets
TELEPHONE LOCK
You can prevent people from making outside calls from 
your telephone.
To lock your telephone
1. Dial the LOCK access code.
2. Dial your Executive Credit Code (see your System 
Administrator).
3. Han
g up.
The telephone lock dialin
g restrictions are in effect. The 
[LOCK] 
button, if defined, li
ghts.
To unlock your telephone
• Repeat the above procedure.
3015_3000txt.book  Page 30  Wednesday, August 4, 1999  11:13 AM 

Avanti 3015 and Avanti 3000 sets 31
DOOR UNIT
Your system may have a door unit equipped with an inter-
com and electric door latch. When a visitor presses the 
doorbell, up to four system extensions rin
g.
When the door bell rings
If your telephone is ringing:
• Press [SPKR]
 or lift the handset.
If another extension is rin
ging:
• Dial the PAGE zone access code associated with the 
door unit,
or
Press the flashin
g [DOOR] 
button, if defined.
You can now speak with the person at the door. 
Opening the...

32 Avanti 3015 and Avanti 3000 sets
NOTE PAD
You can save a number of up to 16 digits during a call.
1. Press [FEATURE].
2. Press [PROGRAM] 
twice.
3. Dial an available speed dial memory code (three di
gits) 
or press an available SPEED DIAL button.
4. Enter up to 16 di
gits.
5. Press [PROGRAM]
. 
To dial the number saved, do a re
gular Speed Dial using 
the Speed Dial memory code or button you used to save 
the number (see Abbreviated dialin
g).
3015_3000txt.book  Page 32  Wednesday, August 4, 1999...

Avanti 3015 and Avanti 3000 sets 33
ADVANCED FEATURES
This section lists some advanced features which you can 
activate from your telephone. Details concernin
g the oper-
ation of these features can be found in the DIGITAL Sys-
tems Operatin
g Instructions manual.
• Account code (voluntary, reminder, forced);
•Answerin
g a second incoming call;
•Back
ground music;
• Camp on;
• Conference loop;
• Confirmed transfer;
• Dial attendant;
•DISA;
• Executive Credit Code (ECC) pro
gramming;
• Executive...