Technics Digital Ensemble Sx Pr54 Owners Manual

Part VIII Sound Edit
111QQTG0701
Sound Edit
TONE SELECT
1.On the SOUND EDIT menu, select TONE.
The display looks similar to the following.
Use the 
 and  buttons to select a setting item and
then the 
∧ and ∨ buttons to specify a selection.
Select ON/OFF and use the 
∧ and ∨ buttons to select
ON or OFF.
2.Use the buttons to the left of the display to
select the tone you wish to edit (1st, 2nd, 3rd,
4th).
3.Select a sound for the tone.
Select GROUP and use the ∧ and ∨ buttons to select
the group, and...

Part VIII Sound Edit
112QQTG0701
Sound Edit
4.Select HIGH and use the ∧ and ∨ buttons and
select H-FADE and use the 
∧ and ∨ buttons to
define the area of the higher range of tone out-
put.
By entering different values for the H-FADE and HIGH
settings, you can define a sloping volume decrease from
the peak output which corresponds to the note pitch.
By overlapping the L-FADE and H-FADE curves of each
different tone, you can achieve a cross-fade effect, where
the sound gradually changes in relation to...

Part VIII Sound Edit
113QQTG0701
Sound Edit
Pitch Edit
Adjust the settings related to the pitch of the sound.
KEY SHIFT & DETUNE
1.On the SOUND EDIT menu display, select
PITCH.
 The display looks similar to the following.
 Use the 

 and 
 buttons to select a setting item and
then the 
∧ and ∨ buttons to specify a selection.
 Select ON/OFF and use the 
∧ and ∨ buttons to select
ON or OFF.
2.Use the buttons to the left of the display to
select a tone (1st, 2nd, 3rd or 4th).
3.Select KEY SHIFT and use...

Part VIII Sound Edit
114QQTG0701
Sound Edit
Filter Edit
Make major changes to the sound by eliminating specific frequency ranges.
FILTER & EQUALIZER
1.On the SOUND EDIT menu, select FILTER.
 The display looks similar to the following.
 Use the 

 and 
 buttons to select a setting item and
then the 
∧ and ∨ buttons to specify a selection.
 Select ON/OFF and use the 
∧ and ∨ buttons to select
ON or OFF.
2.Use the buttons to the left of the display to
select a tone.
3.Select MODE and use the ∧ and ∨...

Part VIII Sound Edit
115QQTG0701
Sound Edit
FILTER ENVELOPE
Specify how the filter changes over time, from
the time the key is played to the time the sound
dies out.
1.Use the PAGE buttons view the 3/4 display.
The display looks similar to the following.
Use the 
 and  buttons to select a setting item and
then the 
∧ and ∨ buttons to specify a selection.
2.Use the buttons to the left of the display to
select a tone.
3.Use the ∧ and ∨ buttons to modify the respec-
tive filter envelopes.
Use the...

Part VIII Sound Edit
116QQTG0701
Sound Edit
Amplitude Edit
Adjust the settings related to the volume of the sound.
LEVEL
1.On the SOUND EDIT menu, select AMPLI-
TUDE.
The display looks similar to the following.
Use the 
 and  buttons to select a setting item and
then the 
∧ and ∨ buttons to specify a selection.
Select ON/OFF and use the 
∧ and ∨ buttons to select
ON or OFF.
2.Use the buttons to the left of the display to
select a tone.
 item and then the ∧ and ∨ buttons to specify a selection....

Part VIII Sound Edit
117QQTG0701
Sound Edit
LFO Edit
LFO can be applied to the pitch, amplitude, filter and/or pan to produce a cyclic modulation of the sound.
Twelve LFO groups can be used.
LFO
1.On the SOUND EDIT MENU display, select
LFO.
The display looks similar to the following.
Use the 
 and  buttons to select a setting item and
then the 
∧ and ∨ buttons to specify a selection.
Select ON/OFF and use the ∧ and ∨ buttons to select
ON or OFF.
2.Use the PAGE buttons to select the respective...

Part VIII Sound Edit
118QQTG0701
Sound Edit
Effect Edit
These are settings related to the various effects applied to your edited sound.
EFFECT
1.On the SOUND EDIT menu display, select
EFFECT.
The display looks similar to the following.
2.Use the CHORUS ON/OFF buttons set CHO-
RUS to on or off. Use the respective DEPTH 
∧
and ∨ buttons to specify how the CHORUS is
applied.
3.Use the REVERB ADJUST ∧ and ∨ buttons to
specify how the REVERB is applied.
4.Use the MONO/POLY ∧ and ∨ buttons to
select the sound...

Part VIII Sound Edit
119QQTG0701
Sound Edit
6.Repeat steps 2 to 5 for the other controllers,
as desired.
7.Use the GLIDE ∧ and ∨ buttons to select
whether or not the glide effect is active.
ENABLE: 
The glide effect is enabled.
DISABLE: 
The glide effect is disabled.
Store the new sound
The MEMORY button in the SOUND GROUP section accesses memory banks reserved for the sounds
you create with the SOUND EDIT. You can store up to 40 original sounds then select the sounds just like
the other sounds in the...

120QQTG0701
Control
Part IX   Control
Outline of Control 
functions
Various settings related to the operation of this instrument are adjusted with the CONTROL functions.
1.Press the PROGRAM MENUS button to turn it
on.
• The display looks similar to the following.
2.Select CONTROL.
 The display looks similar to the following.
3.Select a function.
INITIAL 
Return the settings and memories to the
factory-preset status. (Refer to page 133.)
PEDAL SETTING
Various functions can be assigned to the soft
pedal....