Technics Digital Ensemble Sx Pr54 Owners Manual

Part XI MIDI
132QQTG0701
MIDI
Computer Connection
These settings are used to select the mode related to MIDI signal flow when a personal computer is con-
nected to the USB terminal of this instrument.
When connecting to a personal computer, install the USB driver on the included CD-ROM to the computer first. (Refer to the
separate manual for more information.)
1.Turn off the power to this instrument.
2.Connect a personal computer to the USB ter-
minal on the rear of this instrument.
3.Turn on the power...

133QQTG0701
Initialize
This instrument has many settable functions and storable memories. However, you can return the settings
and memory to the factory-preset status.
INITIAL
1.Press the PROGRAM MENUS button to turn it
on.
• The display changes to the following.
2.Select CONTROL.
 The display looks similar to the following.
3.Select INITIAL.
 This display changes to the following.
4.Use the 
 and  buttons to select the desired
type of initialization.
 PERFORMANCE includes all the items which are...

134QQTG0701
Connections (on the rear panel)
AUX IN
Other instruments such as a sound generator
can be connected to this terminal, and the sound
will be output from this instrument’s speakers. To
receive monaural sound, connect the other
instrument to the R/MONO terminal. (Do not con-
nect the L terminal.)
LINE OUT
By connecting an external high-power amplifier,
the sound can be reproduced at a high volume.
To output monaural sound, connect the external
equipment to the R/MONO terminal. (Do not con-
nect...

135QQTG0701
Assembly
Follow the steps below to assemble your Technics piano. Make sure you are using the correct parts and
that they are in the correct direction.
 At least 2 people are required for assembly.
 To disassemble the piano, reverse the procedure.
1.Remove the packing and take the parts out of
the carton. Confirm that all the parts on the
printed list are present.
2.The following parts are in the screw kit.
3.Affix the right and left side planks to the pedal
box.
(1) Use the 4 brass-colored...

136QQTG0701
Symptoms which appear to be signs of
trouble
Phenomenon Remedy
The buttons, keys, etc. malfunction. • Turn off the POWER button once, then turn it on again.
If this procedure is not successful, turn off the POWER
button once. Then, while pressing the three lower left
buttons in the RHYTHM GROUP section (8BEAT,
16BEAT and USA) at the same time, turn the POWER
button on again. (Note that, in this case, all program-
mable settings, functions and memories return to their
factory-preset status.)...

137QQTG0701
Storage is not possible. • The remaining memory capacity of the COMPOSER is
0.
Setting the time signature is not possible.  The time signature cannot be changed for a pattern
which is currently recorded in the COMPOSER. If you
wish to change the time signature, first follow the pro-
cedure to clear the memory. (Refer to page 82.)
The playback timing of the rhythm pattern is dif-
ferent from the timing with which it was recorded. The QUANTIZE function was on when the pattern was
recorded and...

138QQTG0701
No. Contents
00The data on the disk that you are
using is for a different product.
01An error has occurred while the disk
was loading.
Please try again!
02 There is no disk in the Disk Drive.
03 The file that you tried to load is empty.
05An error has occurred while the disk
was saving.
Please try again!
06The disk that you are using is write
protected.
Please remove the write protection
and try again.
07The disk that you are using is full.
Please use another disk.
08An error has occurred...

139QQTG0701
56AUTO PUNCH recording has been
unsuccessful because SEQUENCER
operation was interrupted before the
PUNCH OUT measure was reached.
58The song that you have tried to load
exceeds this instrument’s available
memory and cannot be loaded. The
selected song memory has been
cleared.
62The computer connection is not active
because the computer port switch is
set to MIDI. Please turn the power off,
set the switch to the desired setting
and turn the power back on.
64Please select the Panel Memory...

140QQTG0701
Index
AADVANCED  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  45
APC/SEQUENCER VOLUME . . . . . . . . . . . . . . . . . . . . . .  46, 62
AUTO PLAY CHORD  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  44
BBACKUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  90
BANK  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  52
BASIC . . . . . . . . . . . . . . . . . . . . . . . ....

141QQTG0701
Specifications
SX-PR54/M
KEYBOARD 88 KEYS 
SOUND GENERATOR PCM
MAX. POLYPHONY 64 NOTES
NUMBER OF SOUNDS 1025 SOUNDS (990 SOUNDS +2 ORGAN DRAWBARS + 33 DRUM KITS)
PIANO GROUP GRAND, UPRIGHT, ELECTRIC, MODERN
SOUND GROUP STRINGS, VOCAL, GUITAR & HARPSI, BRASS, SAX & WOODWIND,
ORGAN & ACCORDION, SYNTH, BASS, MALLET & ORCH PERC,
WORLD, PIANO MIXTURES, ORCH MIXTURES, DIGITAL DRAWBARS,
DRUM KITS, SOUND EXPLORER
SIMPLE PIANO

FAVORITES

PEDAL DAMPER × 1, PROGRAMMABLE (SOFT) × 1 
PROGRESSIVE...