Teac Pl D2200 Owners Manual

21
Picture Zoom
DVD
g/t/5/bg/t/5/bg/t/5/bg/t/5/bg/t/5/bg/t/5/bg/t/5/b
To zoom the picture, press the ZOOM button during playback.
Each time the ZOOM button is pressed, the magnification level
changes.
<
You can shift the zoom point by pressing the 5/b/g/t
buttons during zoom playback.
<
Zooming does not work on subtitles or menu screens.
Change the Angle 
To display the angle mark on the TV screen, set the ANGLE
MARK setting in the SETUP menu to ON (see page 29).
When a scene recorded with multiple...

22
Repeat Playback 1
Repeat Playback of DVD
Each time the REPEAT button is pressed during playback, the
mode is changed as follows : 
Chapter Repeat
The chapter being played will be played repeatedly. If you
select another chapter in CHAPTER REPEAT mode, the chapter
you selected will be played repeatedly.
<
REPEAT 1 indicator lights on the front panel display.
Title Repeat
All the chapters of the current title will be played repeatedly.
During programmed playback, programmed chapters will be
played...

23
Repeat Playback 2
Repeat Playback of a Designated Section (A-B
Repeat)
Start playback and designate the point at which the A-B
repeat should start (point A) by pressing the A-B button.
“A TO B SET A” appears on the screen.
When the point at which repeat playback should end (point B)
is reached, press the A-B button again.
“A TO B SET B” appears on the screen, and “A-B” lights on
the front panel display.
The designated section will be played repeatedly.
<
When playing a CD/VCD, the point A and B should...

24
Selecting a Start Point Using the Time Code 1
DVD
Time Select
Press the GO TO button twice to enter time menu shown as
below.
Use the number buttons (0~9) to input the time code you want.
For example, key in 0, 1, 2, 3, 4, 5.
Press ENTER to start playing from the point.
Notes
<
If the title number, chapter number or time code you input
does not exist in the disc, the system will not execute your
selection and the selecting menu will exit.
<
The selecting menu will time out for a few seconds if you do...

25
Selecting a Start Point Using the Time Code 2
Video CD or CD
Press the GO TO button.
The time menu appears on the TV screen.
Use the number buttons (0~9) to input the time code you want.
For example, key in 0, 1, 2, 3.
When the last digit is input and the time code is valid, the
system will begin to play from the point.
Note
<
The GOTO features is not work with PBC functions.
2
1
VCD / CD
1
2
You can select a track directly using the number (0~9/+10) buttons
<
In play or stop mode, press the number...

26
Display
DVD
Each time the DISPLAY button is pressed, following information
will appear on the screen.
When playing back a DVD
Notes
<
The above information does not appear on the front panel
display.
<
Depending on the DVD, the title number or chapter number or
time may not appear or you may not be able to change the
display.
TITLE  02 / 05     CHAPTER  001 / 006
00 : 34 : 05
TITLE  REMAIN
00 : 44 : 45
CHAPTER ELAPSED
00 : 01 : 23
CHAPTER REMAIN
00 : 07 : 17
(off)
When playing back a Video CD or CD...

27
Settings & Adjustments 1
This chapter describes how to set and how to adjust using the
SETUP menu. Most settings and adjustments are required to be
set when you first use the system.
Using the SETUP Menu
Using the SETUP menu, you can do the initial setup, adjusting the
picture, etc. you can also set a language for the subtitles and the
OSD, limit playback by children, etc.
Notes
<
Some settings are in the chapter of Basic Setup, see the
relevant pages.
<
All settings in the SETUP menu are useless when...

28
Angle Mark Setting
Selects whether the angle mark  appears on the TV screen or
not when a multi-angles scene is being played.
ON
appears on the TV screen.
OFF
does not appear.
Note
<
You can change the angles using the ANGLE button. For the
details, see page 21.
OSD LANG (Selecting the Language for OSD)
See page 12.
Screen Saver Setting
Turns on or off the screen saver.
If you turn on the screen saver, the screen saver image appears
when you leave the system in pause or stop mode for 1 minutes.
The...

29
Settings & Adjustments 3
To specify the balance and level of the speakers
You can use the Test Tone function to check whether all the
speakers are connected correctly.
ON
Turn on the Test Tone function.
OFF
Turn off the Test Tone function.
- -  SPEAKER SETUP PAGE  - -
CNTR DELAY
REAR DELAY
SET TEST TONE OFFTEST TONE
MAIN PAGE
ONOFF
AUDIO OUT (Selecting the Audio Output Mode)
See page 13.
Dynamic Range Setting
In many listening situations, it is objectionable to allow the sound
to become very loud, and...

30
Setting the Parental Control Level
Playing some DVD discs can be limited depending on the age of
the users. The parental control function in this system allows
playback limitation level to be set by the parent. The default
setting is “NO_PARENTAL”.
Notes
<
The lower the level is set, the stricter the limitation is offerred.
<
If the parental control level of the loading DVD disc is lower
than the setting level, the “PARENTAL VIOLATION” message
will be shown on the TV screen, and the system will refuse...