Teac Pl D2200 Owners Manual

11
Name of Each Control 3
SEARCH / PRESET buttonsIn DVD player mode, press to do fast
reverse or fast forward.
In tuner mode, press to select the preset station.
STEP / FM MODE button
Do the single stepping play while playing a DVD or VCD.
Switches monaural or stereo of FM stereo reception.
SLOW / MEMORY button
Do the slow-motion play while playing a DVD or VCD.
TITLE button
Displays the title menu when playing a DVD.
DISPLAY button
Switches the item displayed on the TV screen or/and on the
front panel...

You must do some basic setting when first using this system. This
chapter describes how to set the OSD (On-Screen Display)
language, color system, audio output mode and video output
mode, etc.
<
If there is too much noise on the SETUP screen and options
are illegible, leave the screen by pressing the SETUP button,
press the PAL/NTSC button on the remote control, and try
again the setup process from the beginning.
To operate this section, press the POWER switch on the front
panel to turn the unit on and...

13
Basic Setup 2
Selecting the Audio Output Mode
You must setup the audio output mode correctly, if not, you will
not get the audio outputs. The default setting is DIGITAL/RAW.
DIGITAL/RAW
If the OPTICAL output on the rear panel is connected with a
receiver built-in Dolby Digital, DTS or/and MPEG decoder,
select this item.
DIGITAL/PCM
If the OPTICAL output is connected with a recorder which
accepts PCM audio signal, select this item.
ANALOG
If the OPTICAL output is not connected with any equipment,...

Basic Operation 1
14
Press the POWER switch to turn the unit on.
The unit can also be controlled with the remote control.
<
By pressing the POWER button on the remote control, you can
switch between ON and STANDBY modes. The indicator lights
up in power standby mode and goes out when this unit is
turned on.
<
Turn the subwoofer on when necessary.
Select a source by pressing the FUNCTION buttons.
The selected source is shown on the front panel’s display.
DVD (current status is displayed)
TUNER (frequency...

15
Sleep Timer
The power can be switched off at the desired time.
Press the SLEEP button repeatedly until desired time
appears on the display.
The sleep time can be changed by 10 minutes’ step.
SLEEP- 120 (110, 100...or 10)
The SLEEP indicator lights, and the power will be switched
off 120 (110, 100...or 10) minutes later. 
Normal display
Sleep timer is off.
<
If you want to check the remaining time, press the SLEEP
button once. The remaining time will be displayed for 2
seconds, and return to the normal...

17
Playback 2
To start playback
In the stop mode, press the PLAY/PAUSE button (y/J).
To suspend playback temporarily (pause mode)
Press the PLAY/PAUSE button (y/J) during playback. 
Still frame on DVD and VCD discs, and music interruption on
MP3 and CD. 
To resume playback, press the PLAY/PAUSE button (y
/J).
To open the disc tray
Press the OPEN/CLOSE button (L) to open and close the disc
tray.
<
When other function is selected, this button dosen’t work.
To stop playback of CD, VCD, MP3
Press the STOP...

18
Surround Mode
LISTENING
Each time the LISTENING button is pressed, the mode is changed
as follows.
(off)
Normal mode. You can listen to available surround mode
(DTS, Dolby Digital, Dolby Pro Logic II).
LT / RT
This is the mode for 2-channel output for future decoding by
Pro Logic decoder.
STEREO
Stereo mode for listening using only front left and right
speakers.
VSS
2-channel virtual surround mode for listening using only
front left and right speakers.
DTS
During playback of DTS source, the surround...

19
Slow-Motion Play
DVD / VCD
Press the  (SLOW) button to play a disc in slow motion.
If the playing disc is DVD, press this button repeatedly to select
the following slow-motion type: SF 2X w
SF 4X wSF 8X wSR 2X
w
SR 4X wSR 8X wnormal play.
If the playing disc is Video CD, press this button repeatedly to
select the following slow-motion type: SF 2X w
SF 4X wSF 8X
w
normal play.
SF : Slow Forward
SR : Slow Reverse
Notes
<
The larger the number is, the slower the speed becoms.
<
This function is not...

20
Using the root menu
A DVD may containt the root menu. Some titles or chapters are
recorded in the root menu.
Press the RETURN button while playing a DVD disc.
The “ROOT MENU” will be shown on TV screen for a moment,
and then the root menu appears. The contents of the menu
vary from disc to disc.
Use the g/t/5/bbuttons to select the title (or chapter) you
want to play.
Depending on the disc, you can use the number buttons
(0~9/+10) to select the title (or chapter).
Press the ENTER button.
The player...