Teac Pl D2200 Owners Manual

							11
Name of Each Control 3
SEARCH / PRESET buttonsIn DVD player mode, press to do fast
reverse or fast forward.
In tuner mode, press to select the preset station.
STEP / FM MODE button
Do the single stepping play while playing a DVD or VCD.
Switches monaural or stereo of FM stereo reception.
SLOW / MEMORY button
Do the slow-motion play while playing a DVD or VCD.
TITLE button
Displays the title menu when playing a DVD.
DISPLAY button
Switches the item displayed on the TV screen or/and on the
front panel display.
PAL / NTSC button
Changes the color system temporarily to match your TV
standard.
MUTING button
Mutes the sound.
AUDIO button
Selects the audio channels for sound.
SUBTITLE button
Selects a desired language for the subtitles while playing a
DVD.
GOTO button
Selects a start point to play.
ZOOM button
Zoom in the playing pictures.
SLEEP button
Activates the sleep timer.
PRO LOGIC II MODE button
Press to select the Dolby Pro Logic Surround mode.
LISTENING button
Selects a listening mode you want.
PROGRAM button
Sets a program play.
OPEN / CLOSE button (L)
Opens or closes the disc tray.
SKIP / TUNING buttonsIn DVD player mode, press to select the
next/previous title, chapter or track.
In Tuner mode, press to change the tuning frequency.
Press and hold the button for more than 1 second to search
the station automatically.
W
V
U
T
S
R
Q
P
O
N
M
L
K
J
I
H
GPLAY / PAUSE button (G/J)
Starts or pauses playing a disc.
STOP button (H)
Stops playing a disc and clears the stored program.
MENU / PBC button
Displays the menu or switch the PBC functions to on or off
when playing a VCD (Ver. 2.0).
DIRECTION buttons
Selects the items or settings.
ENTER button
Executes the items or settings.
RETURN button
Displays the root menu when playing a DVD.
Goes back to the PBC menu when playing a VCD.
VOLUME / ADJ buttons
Increase/decrease the master volume level or the selected
channel level.
SELECT button
Selects the audio channel to view or adjust its level.
EEPS button
Offers pop, rock, jazz, and classic modes. (EEPS stands for
Electronic Equalizer Preset System.)
LANGUAGE button
Selects a desired language for the audio when playing a DVD.
ANGLE button
Changes the angles while playing a DVD.
h
g
f
e
d
c
b
a
Z
Y
X
 ¼ÒµçάÐÞ¼¼ÊõÂÛ̳ http://www.bjjdwx.com/forum.php
 79ÍøÂç http://www.79wl.com
 
						

							You must do some basic setting when first using this system. This
chapter describes how to set the OSD (On-Screen Display)
language, color system, audio output mode and video output
mode, etc.
<
If there is too much noise on the SETUP screen and options
are illegible, leave the screen by pressing the SETUP button,
press the PAL/NTSC button on the remote control, and try
again the setup process from the beginning.
To operate this section, press the POWER switch on the front
panel to turn the unit on and press the DVD button to select the
DVD function.
Selecting the Language for OSD
You can select the language for OSD (On-Screen Display). This
setting allows you select a preferred language for the OSD menu,
operating messages. The default language is ENGLISH.
Press the SETUP button to enter SETUP MENU. Use the 5/b
buttons to select GENERAL SETUP, and then press ENTER
button.
Highlight OSD LANG using the 5
/bbuttons, then press the
t
button to go to the right option list. Select the language
using the 5
/bbuttons, then press the ENTER button to
confirm your selection.
2
1
Press the SETUP button again to exit menu.
Note
<
Some DVDs may not support the selected language. In this
case, the player displays disc menu consistent with the initial
language of disc.
3
Basic Setup 1
12
DVD
g/t/5/bENTER
SETUP
PAL/NTSC
Selecting the Color System
You can setup the color system of this unit to match up your
connected TV set. If the color system of this unit is different from
that of the TV set, the images can not be displayed normally on
the screen. The default setting is MULTI.
MULTI
Select MULTI when a MULTI TV is connected.
NTSC
Select NTSC when a NTSC TV (American standard) is
connected.
PAL
Select PAL when a PAL TV (European standard) is connected.
Press the SETUP button to enter SETUP MENU. Use the 5/b
buttons to select GENERAL SETUP, and then press the ENTER
button.
Highlight TV TYPE using the 5
/bbuttons, then press the t
button to go to the right option list. Select MULTI, NTSC or
PAL using the 5
/bbuttons, then press ENTER to confirm
your selection.
Press the SETUP button again to exit menu.
Note
<
You can change the color system of the unit temporarily by
using the PAL/NTSC button on the remote control.
3
2
1
SETUP MENU  - -  MAIN PAGE
GENERAL SETUP
SPEAKER SETUP
AUDIO SETUP
GOTO GENERAL SETUP PAGE
PREFERENCES
EXIT SETUP
- -  GENERAL PAGE  - -
TV DISPLAY
TV TYPE
ENGLISH
SET OSD LANGUAGE TO ENGLISHVIDEO OUTPUT
ANGLE MARK
OSD LANG
SCR SAVERFRENCHGERMANITALIANMAIN PAGESPANISH
SETUP MENU  - -  MAIN PAGE
GENERAL SETUP
SPEAKER SETUP
AUDIO SETUP
GOTO GENERAL SETUP PAGE
PREFERENCES
EXIT SETUP
- -  GENERAL PAGE  - -
MULTI
NTSC
PA L
NTSC TV
TV DISPLAY
TV TYPE
VIDEO OUTPUT
ANGLE MARK
OSD LANGSCR SAVER
MAIN PAGE
DVD
POWER
 ¼ÒµçάÐÞ¼¼ÊõÂÛ̳ http://www.bjjdwx.com/forum.php
 79ÍøÂç http://www.79wl.com
 
						

							13
Basic Setup 2
Selecting the Audio Output Mode
You must setup the audio output mode correctly, if not, you will
not get the audio outputs. The default setting is DIGITAL/RAW.
DIGITAL/RAW
If the OPTICAL output on the rear panel is connected with a
receiver built-in Dolby Digital, DTS or/and MPEG decoder,
select this item.
DIGITAL/PCM
If the OPTICAL output is connected with a recorder which
accepts PCM audio signal, select this item.
ANALOG
If the OPTICAL output is not connected with any equipment,
select this item.
Press the SETUP button to enter SETUP MENU. Use the 5/b
buttons to select AUDIO SETUP, and then press ENTER button.
Highlight AUDIO OUT using the 5
/bbuttons, then press the
t
buttons to go to the right option list. Select DIGITAL/RAW,
DIGITAL/PCM or ANALOG using the 5
/bbuttons, then press
the ENTER button to confirm your selection.
Press the SETUP button again to exit menu.
Notes
<
If the DIGITAL/RAW is selected and the audio source is LPCM
(DVD), the output in the OPTICAL is PCM.
<
If the DIGITAL/RAW is selected and the audio source is audio
CD, the output in the OPTICAL is PCM.
<
If the ANALOG is selected, the OPTICAL will not have audio
outputs.
<
When playing a CD with no blank intervals recorded between
songs, there are occasions when audio available at DIGITAL
OUT stops momentarily.
3
2
1
DVD
g/t/5/bENTER
SETUP
SETUP MENU  - -  MAIN PAGE
GENERAL SETUP
SPEAKER SETUP
GOTO AUDIO SETUP
AUDIO SETUP
PREFERENCES
EXIT SETUP
- -  AUDIO SETUP  - -
AUDIO OUT
ANALOG DIGITAL/RAW
DYNAMICDIGITAL/PCM 
MAIN PAGE
ONLY ANALOG OUTPUT
Selecting the Video Output Mode
You must setup the video output mode correctly, if not, you will
not get the video outputs. The default setting is S-VIDEO.
S-VIDEO
Select this setting when S-VIDEO OUT is connected.
COMPONENT
Select this setting when COMPONENT VIDEO OUT is
connected.
Press the SETUP button to enter SETUP MENU. Use the 5/b
buttons to select GENERAL SETUP, and then press the ENTER
button.
Highlight VIDEO OUTPUT using the 5
/bbuttons, then press
the t
button to go to the right option list. Select S-VIDEO or
COMPONENT using the 5
/bbuttons, then press ENTER to
confirm your selection.
Press the SETUP button again to exit menu.
3
2
1
SETUP MENU  - -  MAIN PAGE
GENERAL SETUP
SPEAKER SETUP
AUDIO SETUP
GOTO GENERAL SETUP PAGE
PREFERENCES
EXIT SETUP
- -  GENERAL PAGE  - -
S-VIDEOCOMPONENT
SCART
TV DISPLAY
TV TYPE
VIDEO OUTPUT
ANGLE MARK
OSD LANGSCR SAVER
MAIN PAGE
 ¼ÒµçάÐÞ¼¼ÊõÂÛ̳ http://www.bjjdwx.com/forum.php
 79ÍøÂç http://www.79wl.com
 
						

							Basic Operation 1
14
Press the POWER switch to turn the unit on.
The unit can also be controlled with the remote control.
<
By pressing the POWER button on the remote control, you can
switch between ON and STANDBY modes. The indicator lights
up in power standby mode and goes out when this unit is
turned on.
<
Turn the subwoofer on when necessary.
Select a source by pressing the FUNCTION buttons.
The selected source is shown on the front panel’s display.
DVD (current status is displayed)
TUNER (frequency is displayed)
TV
AUX
DIGITAL IN
Play the source, and gradually turn up the volume to the
required level by pressing the VOLUME/ADJ buttons.3
2
1
12
3
Tone Control
1. Press the SELECT button to select “TRE” or “BAS”.
Each time the SELECT button is pressed, the mode is
changed as fig. 1.
To adjust the level of high frequency sound range, select
“TRE (treble)”.
To adjust the level of low frequency sound range, select
“BAS (bass)”.
2. Press the VOLUME/ADJ buttons to change the setting.
The level can be adjusted in 2 dB steps from –10 to +10.
Adjusting Speaker Levels
1. Press the SELECT button to select the speaker level setting.
Each time the SELECT button is pressed, the mode is
changed as fig. 1.
2. Press the VOLUME/ADJ buttons (‡/°) to adjust the
speaker level.
The level can be adjusted in 1 dB step from –15 to +10.
* If you don‘t press the VOLUME/ADJ buttons or the SELECT
button for a few seconds when a level is displayed, the level
display goes out.
B
A
1
3
2
VOLUME/ADJ
SELECT
TRE (TRBLE LEVEL:)
BAS (BASS LEVEL:)
FL (FRONT L LEVEL:)
CNT (CENTER LEVEL:)
FR (FRONT R LEVEL:)
SR (REAR R LEVEL:)
SL (REAR L LEVEL:)
SUB (SUBWOOFER LEVEL:)fig. 1
 ¼ÒµçάÐÞ¼¼ÊõÂÛ̳ http://www.bjjdwx.com/forum.php
 79ÍøÂç http://www.79wl.com
 
						

							15
Sleep Timer
The power can be switched off at the desired time.
Press the SLEEP button repeatedly until desired time
appears on the display.
The sleep time can be changed by 10 minutes’ step.
SLEEP- 120 (110, 100...or 10)
The SLEEP indicator lights, and the power will be switched
off 120 (110, 100...or 10) minutes later. 
Normal display
Sleep timer is off.
<
If you want to check the remaining time, press the SLEEP
button once. The remaining time will be displayed for 2
seconds, and return to the normal display.
F
Headphones
For private listening, insert the headphones plug into the
PHONES jack, and adjust the volume by pressing the
VOLUME/ADJ buttons. The sound from speakers will be cut
off.
<
When the headphones plug is inserted, the Surround mode
is changed to STEREO automatically.
E
Muting
To mute the sound temporarily, press the MUTING button.
MUTE appears on the front panel display for a few seconds.
Press the MUTING button again to restore the sound. MUTE
OFF appears on the front panel display for a few seconds.
If you change the volume during the muting, the muting will
be cancelled.
D
EEPS (Electronic Equalizer Preset System)
The EEPS button offers rock, pop, jazz and classic modes to
enhance your listening.
Pressing the EEPS button repeatedly rotates the mode in the
following sequence:
C
EEPS
MUTING
SLEEP
Basic Operation 2
 ¼ÒµçάÐÞ¼¼ÊõÂÛ̳ http://www.bjjdwx.com/forum.php
 79ÍøÂç http://www.79wl.com
 
						

							17
Playback 2
To start playback
In the stop mode, press the PLAY/PAUSE button (y/J).
To suspend playback temporarily (pause mode)
Press the PLAY/PAUSE button (y/J) during playback. 
Still frame on DVD and VCD discs, and music interruption on
MP3 and CD. 
To resume playback, press the PLAY/PAUSE button (y
/J).
To open the disc tray
Press the OPEN/CLOSE button (L) to open and close the disc
tray.
<
When other function is selected, this button dosen’t work.
To stop playback of CD, VCD, MP3
Press the STOP button (H).
D
C
B
A
MP3
<
Press the MENU/PBC to turn the MP3 menu “SMART NAVI”
on or off. If you press the MENU/PBC button during playback,
playback starts from the first track.
When the MP3 menu is on:
Select a directory by pressing the 5/bbuttons and press the
ENTER button.
A list of track numbers and titles (file names) will be shown on
the right side of the screen. Select a track and press the
ENTER button or the PLAY/PAUSE button. Playback will start
from the selected track.

						

							18
Surround Mode
LISTENING
Each time the LISTENING button is pressed, the mode is changed
as follows.
(off)
Normal mode. You can listen to available surround mode
(DTS, Dolby Digital, Dolby Pro Logic II).
LT / RT
This is the mode for 2-channel output for future decoding by
Pro Logic decoder.
STEREO
Stereo mode for listening using only front left and right
speakers.
VSS
2-channel virtual surround mode for listening using only
front left and right speakers.
DTS
During playback of DTS source, the surround mode is set to DTS
automatically.
DTS Digital Surround delivers up to 6 channels of transparent
audio (which means identical to the original masters) and results
in exceptional clarity throughout a true 360˚ soundfield.
DOLBY DIGITAL
During playback of DOLBY DIGITAL 5.1 CH source, the surround
mode is set to DOLBY DIGITAL automatically.
Dolby Digital 5.1 CH delivers up to 5 totally discrete, full frequency
audio channels (front left and right, center, and surround left and
right), plus 0.1 channel called LFE*( Low-Frequency Effects).
* LFE: Low Frequency Effects
This channel delivers separate non-directional bass signals
to the subwoofer for more dynamic deep bass sound effects.
DOLBY PRO LOGIC II
During playback of any 2 channel source, the surround mode is
set to Dolby Pro Logic II.
Each time the PROLOGIC II MODE button is pressed, the mode is
changed as follows.
DOLBY PRO LOGIC II gives you multichannel surround sound
from any stereo source.
<
DOLBY PRO LOGIC II will not work on monaural source.
MUSIC
The Music mode creates a rich and enveloping surround
ambience from stereo sources such as CDs.
MOVIE
The Movie mode is optimized for movies or programs with
Dolby Surround soundtracks. This mode is also appropriate
for use with video games.
MATRIX
The Matrix mode, a milder version of the Music mode, is
suitable for enhancing mono signals to make them appear
larger.
PRO LOGIC
Similar to the surround effect of DOLBY PRO LOGIC.
VIRTUAL
The Virtual mode should be used when connected to a
virtual surround decoder through the front 2 speakers.
MUSIC
MOVIE
MATRIX
PRO LOGIC
VIRTUAL
(off)
LT/RT
STEREO
VSS
 ¼ÒµçάÐÞ¼¼ÊõÂÛ̳ http://www.bjjdwx.com/forum.php
 79ÍøÂç http://www.79wl.com
 
						

							19
Slow-Motion Play
DVD / VCD
Press the  (SLOW) button to play a disc in slow motion.
If the playing disc is DVD, press this button repeatedly to select
the following slow-motion type: SF 2X w
SF 4X wSF 8X wSR 2X
w
SR 4X wSR 8X wnormal play.
If the playing disc is Video CD, press this button repeatedly to
select the following slow-motion type: SF 2X w
SF 4X wSF 8X
w
normal play.
SF : Slow Forward
SR : Slow Reverse
Notes
<
The larger the number is, the slower the speed becoms.
<
This function is not available for CD and MP3.
<
On some discs, the slow-motion playback function is disabled.
Press the mor ,button while playing a disc.
The player will search the disc fast forward or reverse. When you
find the point you want, press the G
/Jbutton to return to the
normal speed.
Change the searching speed
You can change the searching speed by pressing the mor
,
button repeatedly.
<
If the playing disc is DVD or Video CD, you can select the
following types of searching speed: FF 1X, FF 2X, FF 3X, FF 4X;
or FR 1X, FR 2X, FR 3X, FR 4X.
<
If the playing disc is CD, you can select the following types of
searching speed: FF 1X, FF 2X; or FR 1X, FR 2X.
Notes
<
This function is not available for MP3.
<
The larger the number is, the faster the searching speed
becoms.
<
For Video CD and CD, when the searching goes to the end of
one track, the player will begin to play the next track at normal
speed.
Locate a Point Quickly
Press the  (STEP) button repeatedly to play the disc step by
step (one frame every step).
Press the G
/Jbutton again to resume normal playback.
Note
<
This function is not available for CD and MP3.
Single Stepping Play
t/J
t/J
DVD / VCD / CD
DVD / VCD
Skip Next or Previous
DVD / VCD / CD / MP3
Press the .or /button while playing a disc.
The playback will go to the next or previous title, chapter or track
in continuous play mode.
Notes
<
If the REPEAT-ONE function has been set, pressing the .or
/
button will replay the same chapter (or track or title) from
its beginning.
<
If the REPEAT-ALL function has been set, pressing the .or
/
button repeatedly will skip to select all the chapters (or
tracks) in a title (or disc) cyclically.
 ¼ÒµçάÐÞ¼¼ÊõÂÛ̳ http://www.bjjdwx.com/forum.php
 79ÍøÂç http://www.79wl.com
 
						

							20
Using the root menu
A DVD may containt the root menu. Some titles or chapters are
recorded in the root menu.
Press the RETURN button while playing a DVD disc.
The “ROOT MENU” will be shown on TV screen for a moment,
and then the root menu appears. The contents of the menu
vary from disc to disc.
Use the g/t/5/bbuttons to select the title (or chapter) you
want to play.
Depending on the disc, you can use the number buttons
(0~9/+10) to select the title (or chapter).
Press the ENTER button.
The player starts playing the selected title (or chapter).
Notes
<
Depending on the DVD disc, you may not be able to enter the
root menu.
<
For some DVD disc, when you press the RETURN button, the
playback will restart from the beginning of the disc.
3
2
1
Using the DVD menu
Some DVDs allow you to select the disc contents using the menu.
When you play these DVDs, you can select the language for the
subtitles, the language for the sound, etc., using the DVD menu.
Press the TITLE button while playing a DVD disc.
The DVD menu appears on the TV screen. The contents of the
menu vary from disc to disc.
Use the g/t/5/bbuttons to select the item you want to
change.
Depending on the disc, you can use the number buttons (0~9 /
+10) to select the item.
To change other items, repeat Step 2.
Press the ENTER button.
Note
<
You can set a preferred language for audio and subtitle in the
SETUP menu. For details, see page 31.
4
3
2
1
DVD
2
1
3
Number buttons
DVD
2
1
3
Number buttons
4
 ¼ÒµçάÐÞ¼¼ÊõÂÛ̳ http://www.bjjdwx.com/forum.php
 79ÍøÂç http://www.79wl.com