Teac Pl D2200 Owners Manual

9A09626500
YOM100182-0003
PL-D2200
AV Digital Home Theater System
OWNER’S MANUAL
 ¼ÒµçάÐÞ¼¼ÊõÂÛ̳ http://www.bjjdwx.com/forum.php
 79ÍøÂç http://www.79wl.com
 

Contents 
2
Thank you for choosing TEAC. Read this manual carefully to get
the best performance from this unit.
Before Use  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Discs  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Remote Control Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Connecting Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . ....

3
Discs 1
Type of Discs That Can be Played on This
System
This player can playback discs bearing any of the following
marks:
Note 1
DVD players and discs are designed with region numbers that
dictate the regions in which a disc can be played. If the region
number on the disc you want to play does not match the region
number of your DVD player, you will not be able to play the
disc. In that case, error message will appear on the screen.
The region code is printed on the rear panel of this unit.
Sample...

4
“DTS” and “DTS Digital Surround” are trademarks of Digital Theater
Systems, Inc. ©1996 Digital Theater Systems, Inc. All rights reserved.
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”
and the double-D symbol are trademarks of Dolby Laboratories.
Confidential Unpublished Works. ©1992-1997 Dolby Laboratories, Inc. All
rights reserved.
This product incorporates copyright protection technology that is protected
by method claims of certain U.S. patents and other intellectual...

5
Remote Control Unit
The provided Remote Control Unit allows the unit to be operated
from a distance. 
When operating the remote control unit, point it towards the
REMOTE SENSOR on the front panel of the unit.
<
Even if the remote control unit is operated within the effective
range, remote control operation may be impossible if there are
any obstacles between the unit and the remote control.
<
If the remote control unit is operated near other appliances
which generate infrared rays, or if other remote...

Connection 1
6
COMPONENT VIDEO jacks
If your TV or monitor has COMPONENT VIDEO IN jacks,
connect them with a quality component video cable.
S-VIDEO or VIDEO jacks
S-VIDEO connection is better than composite (VIDEO)
connection.
If the component has an S-VIDEO jack, connect it with a S-
VIDEO cable, and select “S-VIDEO” in the DVD SETUP menu.
S-VIDEO OUT (PL-D2200) qS-VIDEO IN (TV)
CAUTION:
In the default setting, COMPONENT VIDEO OUT jacks are
not active. If you want to use COMPONENT VIDEO OUT
jacks,...

7
CB Y CRCOMPONENT
VIDEO OUT
LINE INRL
DIGITAL
OUT
MD, CD-R, etc.
TAPE, etc.
DIGITAL
IN
TV (MONITOR)
LINE OUTRL
A
LINE OUTRL
B
BB
Connection 2
DIGITAL IN/OUT terminal
If the component has an DIGITAL IN terminal, connect them
with an optical cable.
DIGITAL OUT (PL-D2200) 
q
DIGITAL IN (CD-R, MD, etc.)
DIGITAL IN (PL-D2200) 
q
DIGITAL OUT (CD-R, MD, etc.)
<
Select the proper digital output mode in accordance with
your connection (see page 13).
AUDIO IN/OUT jacks
Analog 2-channel audio signal is input or...

Connection 3
8
SUBWOOFER PRE OUT jack
Connect the component with an RCA pin cable (monoral).
Power cord

9
Name of Each Control 1
Front Panel
POWER switch
Turns on and off the main power of the system.
Disc Tray
Place a disc on the tray.
OPEN/CLOSE button (L)
Opens or closes the disc tray.
STANDBY indicator
This indicator lights when the unit is in the standby mode.
When the unit is turned on, it goes off.
Front Panel Display
Indicates the playing time, etc..
VOLUME/ADJUST button
Increase the master volume level or the selected channel
level.
SKIP/TUNING button
While playing a disc, press this button to...

Name of Each Control 2
10
Front Panel Display
Illuminate the activating speakers.
Illuminates when Dolby Pro Logic II is activated.
Illuminates during playback of DOLBY DIGITAL 5.1 CH source.
Type of the disc loaded.
Pause
Illuminates during programmed playback.
Illuminates when SLEEP TIMER is set.
Illuminates during repeat playback
Frequency unit
Displays current status or time (Title, Track, Preset, Chapter).
Play
Illuminates when an FM stereo broadcast is tuned.
Illuminates during playback of DTS...