Home > Studio Experience > Projector > Studio Experience Projector HD2 DLP User Manual

Studio Experience Projector HD2 DLP User Manual

Here you can view all the pages of manual Studio Experience Projector HD2 DLP User Manual. The Studio Experience manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 61

60
Appendix
Computer Compatibility Chart
Computer
•  Multiple signal support
Horizontal Frequency: 25–75 kHz, Vertical Frequency: 50–85 Hz, Pixel Clock: 25–108 MHz
•  Compatible with sync on green and composite sync signals
•  XGA compatible with advanced intelligent compression
The following is a list of modes that conform to VESA. However, this projector supports 
other signals that are not VESA standards.
PC/
MAC/
WSResolutionHorizontal 
Frequency 
(kHz)Ve r t i c a l  
Frequency 
(kHz)VESA...

Page 62

Appendix
61
Video Compatibility Chart
1. Component 1/2 support signal formats are Y/Pb/Pr, Y/Cb/Cr
2. VGA port support signal formats are RGsyncB, RGBHV or RGBCsysc
3. “U” means manual setting is needed
DTV
IR Remote Key Discrete Codes
ResolutionH-Freq 
(kHz)V-Freq    
(Hz)Comp1    
SupportComp2 
SupportS-Video 
SupportCompos-
ite SupportVGA
SupportDVI
Support
SD Video NTSC 640x480i 15.73 59.94/603333
PAL 768x576i 15.63 503333
SECAM 768x576i 15.63 503333
NTSC-4.43UUUU
PA L - MUUUU
PA L - NUUUU...

Page 63

62
Appendix
Troubleshooting
Problem Check
Projector does not startProjector power cord is not plugged into the wall outlet.
Remote control batteries have run out.
No pictureThe selected input mode is wrong.
Cables may be incorrectly connected to the rear panel of the projector.
Power to the external connected device is off.
The video signal format of the video equipment is not set correctly.
Color is fadedPicture adjustments are incorrectly set.
Picture is blurredFocus is incorrectly set.
The projection...

Page 64

Appendix
63
Picture is dark or 
bright and whitishPicture adjustments are incorrectly set.
Picture is too bright 
and whitishPicture adjustments are incorrectly set. 

Page 65

64
Appendix
Product Specifications
Item Description
Model No. HD2+ DLP Front Projector
DLP Panel Size 0.8 HD2+
Display method: DMD by Texas Instruments
Device method: Digital Light Processing (DLP
TM)
Display Type DLP Chip, RGB optical shutter method
Resolution 1280 x 720 pixels
Lens 1-1.25 x zoom lens, F2.36~2.5, f= 24.0~30.1 mm
Projection Lamp 250 W / 200 W switchable UHP lamp
Input Sources Video VGA
YCbCr, YPbPr
CVBS (Composite Video)
S-Video
DVI-D
Control RS-232 (For computer)
IR Receiver (For...

Page 66

Appendix
65
Dimensions
Units: inches (mm)
STATUSEXIT
INPUTMENU
ECO
Focus
Zoom
LENS  SHIFT(H)LENS  SHIFT(V)ENTER320 mm 121
 2inch
341.8 mm 13
7
16inch
144.8 mm511
16inch
125.7 mm4
15
16inch
160.8 mm65
16inch
283.4 mm 113
16inch
85.7 mm33
8inch
216.1 mm8
1
2inch
41.6 mm1
5
8inch
44.2 mm1
3
4inch
208.9 mm81
4inch
253.6 mm10 inch
127.4 mm5 inch 29.9 mm1
3
16inch
179.0 mm71
16inch
125.7 mm4
15
16inch216.1 mm8
1
2inch
WARNING
  Do not disassemble any components except the lamp chassis cover while replacing...

Page 67

66
Appendix
NOTES 

Page 68

Appendix
67 

Page 69

68
Appendix 

Page 70

Appendix
69 
Start reading Studio Experience Projector HD2 DLP User Manual

Related Manuals for Studio Experience Projector HD2 DLP User Manual

All Studio Experience manuals