Studio Experience Projector HD2 DLP User Manual
Here you can view all the pages of manual Studio Experience Projector HD2 DLP User Manual. The Studio Experience manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 41
40 Easy to Use Functions Selecting the Picture Display Mode You can modify the picture display mode to enhance the input image. Depending on the input signal, you can choose “Standard”, “LetterBox”, “Anamorphic” or “Pixel to Pixel” image. Switching the Picture Display using Different input signals Press on the remote or on the projector and select a layout. • Pressing cycles through the display modes Info • In the Pixel to Pixel Mode, images are displayed in the original resolution, and are...
Page 42
Easy to Use Functions 41 VIDEO StandardLetterboxAnamorphicPixel to Pixel For 4:3 aspect ratio480i 480P 576i 576P NTSC PA L SECAM768X576 1280X720 1280X720640X480i 640X480P 768X576i 768X576P 640X480 768X576 768X576 For 16:9 aspect ratio480P 576P768X576 768X5761280X720 1280X7201280X720720X480 720X576 720P – – 1280x720 – 1080i – – 1280x720 – Input SignalOutput screen image StandardLetterboxAnamorphicPixel to Pixel 480I 480P 576I 576P NTSC PA L SECAM For 4:3 aspect ratio Letter box image...
Page 43
42 Easy to Use Functions . COMPUTER StandardAnamorphicPixel to Pixel For 4:3 aspect ratioVGA(640X480) 960X720 1280X720 640X480 SVGA(800X600) 960X720 1280X720 800X600 XGA(1024X768) 960X720 1280X720 1024X768 Input SignalOutput screen image StandardAnamorphicPixel to Pixel VGA For 4:3 aspect ratio (640x480) SVGA For 4:3 aspect ratio (800x600) XGA For 4:3 aspect ratio (1024x768)
Page 44
Easy to Use Functions 43 H-V Position Function Use this to center the display vertically and horizontally. 1In H Position, press “W” or “X”. The display moves left or right. 2In V Position, press “W” or “X” The display moves upward or downward.Main MenuMain Menu
Page 45
44 Easy to Use Functions H-V Keystone Function Correcting Trapezoidal Distortion and Adjusting Vertical Size. This function allows for Keystone correction. Note • When the image is projected at an angle, the image becomes distorted trapezoidally. The function for correcting trapezoidal distortion is called Keystone Correction. (On-screen Trapezoidal Distortion) Correction and the adjustment of the vertical size of the picture. 1Select “V-Keystone” or “H-Keystone” in the layout. 2Press“W” or “X”...
Page 46
Easy to Use Functions 45 White Enhance Selecting the Economy Mode Economy mode reduces the power consumption of the projector.White enhance emphasizes the bright portions of images. Setting the Power Save Select “ON” from the “Economy Mode” in the “Options” menu. For operating the menu screen, see page 33. Note • Although noise is reduced when “ECO” is set to “ON”, brightness decreases by 20%. • “ECO” mode is “ON” by default. Main Menu Main Menu STATUS EXIT INPUTMENU ECO ENTER ECO Mode...
Page 47
46 Easy to Use Functions Automatic Power Off Function Source Select When set to “ON”, the Auto Power Off switches the projector off if an input signal is not detected or you do not press any controls for 15 minutes. Auto Power Off is disabled when set to “OFF”. Select “Auto Power Off” from the “Options” menu on the menu screen. For operating the menu screen, see page 33. Note • When the Auto Power Off function is set to “ON”, a warning, “Power OFF in 5 min.” displays five minutes before the...
Page 48
Easy to Use Functions 47 OSD Timeout OSD Timeout is used to set how long the OSD stays open if no buttons are pressed. OSD Timeout5 15 60 Main Menu
Page 49
48 Easy to Use Functions OSD Blending This allows you to set the transparency of the OSD menu. When set to transparent, you can see the image behind the menu. Reversing/Inverting Projected Images The projector can reverse and invert images for various projection methods. Select “OSD Blending” from the “Options” menu on the menu screen. For operating the menu screen, see page 33. Setting the Projection Mode Select “Projection Mode” from the “Options” menu on the menu screen. For operating the menu...
Page 50
Easy to Use Functions 49 Deinterlace There are several different deinterlacing algorithms. Choose the setting that best matches the content you are watching. Select “Deinterlace” from the “Options” menu on the menu screen. For operating the menu screen, see page 33. Note • In PAL50Hz or SECAM, the 2:2 pull down enhancement is enabled only in film mode, after the film source has been entered. Selected itemDescription DCTI Enhances video by replacing the edges of the video with edges that have...