Studio Experience Projector HD2 DLP User Manual

30
Basic Operation
Selecting the On-screen 
Display Language
•  The on-screen display language of the 
projector can be set to English, Français, 
Italiano, Deutsch, Español, 中文, 日本語, or 
한국어.
1Press “MENU”.
•  The menu displays.
2Press  or X  to select 
“Language”.
3Press S or T to select the 
desired language, then press  .
The selected language is set as the 
on-screen display.
4Press “EXIT”.
Main Menu 

31
Basic Operation
Menu Bar Items
This list shows the items that can be set in the projector.
„Composite Video/S-Video, DVI Mode
Picture Brightness -50 ~ +50
Contrast -50 ~ +50
Color -64 ~ +64
Tint -64 ~ +64
SharpnessSoftest, Soft, Normal, Sharp, 
Sharpest
Gamma 1.0/1.5/1.8/2.0/2.2/2.35/2.5/2.8
Color TempColor Temp 5000k ~ 10000k, 
Native
x         -30 ~ +30
y         -30 ~ +30
Reset this CT
Picture SettingNormal/Bright/Movie/Custom1/
Custom2
White Balance
RGain
GGain
BGain
ROffset
GOffset
BOffset
Save...

32
Basic Operation
„PC/Component 1&2 Mode
Picture Brightness -50 ~ +50
Contrast -50 ~ +50
Color -64~+64
(PC Hide)
Tint -64~+64
(PC Hide)
SharpnessSoftest, Soft, Normal, Sharp, 
Sharpest
Gamma 1.0/1.5/1.8/2.0/2.2/2.35/2.5/2.8
Color TempColor Temp 5000k ~ 10000k, 
Native
x         -30 ~ +30
y         -30 ~ +30
Reset this CT
Picture SettingNormal/Bright/Movie/Custom1/
Custom2
White Balance
RGain
GGain
BGain
ROffset
GOffset
BOffset
Save this setting
Reset
Fine SyncClock -50 ~ +50
(Component 1/2 Hide)
Phase...

33
Basic Operation
Using the Menu Screen
You can use the menu screens to 
adjust the image and projector 
settings. You can operate the menus 
from the projector or remote control 
using the following procedure.
Menu Selections 
(Adjustments)
1Press   on remote or   on 
the keypad.
•  The menu screen is displayed.
 Note
•  The “Picture” menu screen for the 
selected input mode is displayed.
2Press S or T to select the menu 
you want to adjust.
3Press X or   to reach the Sub-
menu and then press S or T to...

34
Basic Operation
Adjusting the Image
You can adjust the image with the 
following procedure.
Use this option to adjust the overall brightness of the image. Use in conjunction with contrast to fine-tune the 
display. The scale is from -50 to 50.The default setting is 0.
Use this option to adjust the contrast of the image. Use this control in conjunction with contrast to fine-tune 
the display. The scale is from -50 to 50. The default setting is 0.
Selected itemDescription
BrightnessAdjusts the...

35
Basic Operation
Use this option to adjust the color intensity of the image.
Use this option to adjust the tint of your image. Press 
X to make the image more green. Press W to make the 
image more purple.
Use this option to adjust the clarity and focus of the image.
Use this option to set the color temperature of the image. Higher color temperatures make the image look 
cool with a bluish hue. Lower color temperature makes the image look  warmer with a reddish hue. The range 
is from 5000°K to...

36
Basic Operation
Use this option to adjust the gamma correction of the image. There are seven non-linear gamma corrections 
1.0, 1.5, 1.8, 2.0, 2.2, 2.35, 2.5, and 2.8. The default setting is 2.2.
The contrast and brightness for each color of the RGB Gain & Offset values in DLP can be individually 
adjusted.
Gamma
White Balance 

37
Basic Operation
Picture setting
This function stores Brightness, Contrast, 
Color, Tint, Sharpness, Gamma, Color Temp, 
Color Type, and White Enhance set in 
“Picture”. Each stored setting is reassigned to 
each input mode. 
Select “Picture Setting” from the “Picture” menu on the menu screen.
For operating the menu screen, see page 33.
 Note
•  When Recalling Saved Contents:
When a saved memory number is selected, 
the contents of the “Picture” menu changes 
to the adjustment values of the saved...

38
Basic Operation
Adjusting Computer Images
(Computer Source Signal Only)
Use the Fine Sync function in case of irregularities such as vertical stripes or flickering in 
portions of the screen.
When Auto Tune is OFF
When “Auto Tune” is “OFF”, 
interference such as flickering or 
vertical stripes may occur when 
displaying tiling or vertical stripes. 
Should this occur, adjust “Clock” and 
“Phase”, to obtain an optimum image.
Select “Clock”, “Phase”, in the “Fine 
Sync” menu on the menu screen.
For...

Easy to Use Functions
39
 
Easy to Use Functions