Studio Experience Projector HD2 DLP User Manual
Have a look at the manual Studio Experience Projector HD2 DLP User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 12 Studio Experience manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
30 Basic Operation Selecting the On-screen Display Language • The on-screen display language of the projector can be set to English, Français, Italiano, Deutsch, Español, 中文, 日本語, or 한국어. 1Press “MENU”. • The menu displays. 2Press or X to select “Language”. 3Press S or T to select the desired language, then press . The selected language is set as the on-screen display. 4Press “EXIT”. Main Menu
31 Basic Operation Menu Bar Items This list shows the items that can be set in the projector. „Composite Video/S-Video, DVI Mode Picture Brightness -50 ~ +50 Contrast -50 ~ +50 Color -64 ~ +64 Tint -64 ~ +64 SharpnessSoftest, Soft, Normal, Sharp, Sharpest Gamma 1.0/1.5/1.8/2.0/2.2/2.35/2.5/2.8 Color TempColor Temp 5000k ~ 10000k, Native x -30 ~ +30 y -30 ~ +30 Reset this CT Picture SettingNormal/Bright/Movie/Custom1/ Custom2 White Balance RGain GGain BGain ROffset GOffset BOffset Save this setting Reset Layout Aspect RatioStandard/Anamorphic/ Letterbox/Pixel to Pixel H-Position V-Position V-Keystone H-Keystone ResetOptions White Enhance ON/OFF ECO mode ON/OFF Auto Power Off ON/OFF Source Select Manual/Auto OSD Timeout 5. 15. 60 secs OSD Blending ON/OFF PRJ ModeFront/Front ceiling/ Rear/Rear ceiling Deinterlace (Dvi Hide)DCTI 0 ~ 7 Video on film ON/OFF Film Mode 3:2@60Hz 2:2@50Hz 2:2@50Hz 3:2@60Hz OFF Reset Lamp Timer Reset Status Input Source S-Video Composite Component 1 Component 2 DVI PC LanguageEnglish Français Italiano Deutsch Español 中文 日本語 한국어 Factory Reset
32 Basic Operation „PC/Component 1&2 Mode Picture Brightness -50 ~ +50 Contrast -50 ~ +50 Color -64~+64 (PC Hide) Tint -64~+64 (PC Hide) SharpnessSoftest, Soft, Normal, Sharp, Sharpest Gamma 1.0/1.5/1.8/2.0/2.2/2.35/2.5/2.8 Color TempColor Temp 5000k ~ 10000k, Native x -30 ~ +30 y -30 ~ +30 Reset this CT Picture SettingNormal/Bright/Movie/Custom1/ Custom2 White Balance RGain GGain BGain ROffset GOffset BOffset Save this setting Reset Fine SyncClock -50 ~ +50 (Component 1/2 Hide) Phase -16 ~ +15 Reset Execute Auto Tune Auto Tune (ON/OFF) Layout Aspect Ratio Standard/Anamorphic/ Letterbox/Pixel to pixel H-Position V- P o si ti on V- K e ys t o ne H-Keystone ResetOptions White Enhance ON/OFF ECO mode ON/OFF Auto Power Off ON/OFF Source Select Manual/Auto OSD Timeout 5. 15. 60 secs OSD Blending ON/OFF PRJ ModeFront/Front ceiling/ Rear/Rear ceiling Deinterlace (480i, 576i only)DCTI 0 ~ 7 Video on film ON/OFF Film Mode 3:2@60Hz 2:2@50Hz 2:2@50Hz 3:2@60Hz OFF Reset Lamp Timer Reset Status Input Source S-Video Composite Component 1 Component 2 DVI PC LanguageEnglish Français Italiano Deutsch Español 中文 日本語 한국어 Factory Reset
33 Basic Operation Using the Menu Screen You can use the menu screens to adjust the image and projector settings. You can operate the menus from the projector or remote control using the following procedure. Menu Selections (Adjustments) 1Press on remote or on the keypad. • The menu screen is displayed. Note • The “Picture” menu screen for the selected input mode is displayed. 2Press S or T to select the menu you want to adjust. 3Press X or to reach the Sub- menu and then press S or T to select the item you want to adjust. Note • The selected item will be highlighted. 4Press W or X to adjust the item selected. • The adjustment is stored. 5Press to return to “Main MENU”. 6Press to close the menu screen. Main Menu COMPONENT 1 COMPONENT 2 VIDEO/S-VIDEO DVI/PC MENU button STATUS EXIT INPUTMENU ECO ENTER MENU button MENUMENU
34 Basic Operation Adjusting the Image You can adjust the image with the following procedure. Use this option to adjust the overall brightness of the image. Use in conjunction with contrast to fine-tune the display. The scale is from -50 to 50.The default setting is 0. Use this option to adjust the contrast of the image. Use this control in conjunction with contrast to fine-tune the display. The scale is from -50 to 50. The default setting is 0. Selected itemDescription BrightnessAdjusts the brightnessDecreases brightnessIncreases brightness ContrastAdjusts the contrast levelDecreases contrastIncreases contrast ColorAdjusts the color intensityDecreases color intensityIncreases color intensity TintAdjusts the tonesSkin tones become purplishSkin tones become greenish Brightness Contrast Main Menu
35 Basic Operation Use this option to adjust the color intensity of the image. Use this option to adjust the tint of your image. Press X to make the image more green. Press W to make the image more purple. Use this option to adjust the clarity and focus of the image. Use this option to set the color temperature of the image. Higher color temperatures make the image look cool with a bluish hue. Lower color temperature makes the image look warmer with a reddish hue. The range is from 5000°K to 10000°K, in 500°K increments. When set to NATIVE, the image has the maximum brightness. Select x, y to adjust the color temperature. For example: • When you adjust the x, X, y, W, the image will looks red. • When you adjust the x, W, y, W, the image will looks blue. • When you adjust the x, W, y, X, the image will looks green. • When you adjust the x, X, y, X, the image will looks yellow. Color Tint Sharpness Color TEMP The point will move in the Black Body Curve.
36 Basic Operation Use this option to adjust the gamma correction of the image. There are seven non-linear gamma corrections 1.0, 1.5, 1.8, 2.0, 2.2, 2.35, 2.5, and 2.8. The default setting is 2.2. The contrast and brightness for each color of the RGB Gain & Offset values in DLP can be individually adjusted. Gamma White Balance
37 Basic Operation Picture setting This function stores Brightness, Contrast, Color, Tint, Sharpness, Gamma, Color Temp, Color Type, and White Enhance set in “Picture”. Each stored setting is reassigned to each input mode. Select “Picture Setting” from the “Picture” menu on the menu screen. For operating the menu screen, see page 33. Note • When Recalling Saved Contents: When a saved memory number is selected, the contents of the “Picture” menu changes to the adjustment values of the saved memory number. • When Editing Saved Contents: Edit the contents of the “Picture” menu after selecting the memory number for which adjustment values are to be edited. Save this setting Use this option to save changes you made in “Picture setting” to custom 1 or custom 2. Reset Select this option to set to all items in the Picture menu to the factory default values.
38 Basic Operation Adjusting Computer Images (Computer Source Signal Only) Use the Fine Sync function in case of irregularities such as vertical stripes or flickering in portions of the screen. When Auto Tune is OFF When “Auto Tune” is “OFF”, interference such as flickering or vertical stripes may occur when displaying tiling or vertical stripes. Should this occur, adjust “Clock” and “Phase”, to obtain an optimum image. Select “Clock”, “Phase”, in the “Fine Sync” menu on the menu screen. For operating the menu screen, see page 33. Auto Tune adjustment Automatically adjusts a computer image. Select “Execute Auto Tune” from the “Fine Sync” menu on the menu screen. For operating the menu screen, see page 33.Screen display during Auto Tune Note • Auto Tune may take some time to complete, depending on the image stored in the computer connected to the projector. Selected itemDescription ClockAdjusts vertical noise. Phase Adjusts horizontal noise (similar to tracking on your VCR). Main Menu