Studio Experience Projector HD2 DLP User Manual
Have a look at the manual Studio Experience Projector HD2 DLP User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 12 Studio Experience manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
60 Appendix Computer Compatibility Chart Computer • Multiple signal support Horizontal Frequency: 25–75 kHz, Vertical Frequency: 50–85 Hz, Pixel Clock: 25–108 MHz • Compatible with sync on green and composite sync signals • XGA compatible with advanced intelligent compression The following is a list of modes that conform to VESA. However, this projector supports other signals that are not VESA standards. PC/ MAC/ WSResolutionHorizontal Frequency (kHz)Ve r t i c a l Frequency (kHz)VESA StandardDVI Support PC VGA640 x 350 31.5 70 640 x 48031.5 60 3 37.9 723 37.5 753 43.3 853 ResolutionHorizontal Frequency (kHz)Ve r ti c a l Frequency (kHz)VESA Stan- dardDVI SupportDisplay DVI720 × 480 31.5 60 3Upscale 720 × 576 31.3 50 1280 × 72045 60 37.5 50 1980 × 1080i33.8 60 28.1 50 PC/ MAC/ WSResolutionHorizontal Frequency (kHz)Ve r t i c a l Frequency (kHz)VESA StandardDVI Support PCSVGA 800 x 60035.1 56 33 37.9 60 48.1 72 46.9 75 XGA 1024 x 76848.4 60 33 56.5 70 60.0 75 68.7 85 MAC 13”VGA 640 x 480 34.9 67 MAC 16”SVGA 832 x 624 49.6 75 MAC 19”XGA 1024 x 768 48.4 603 Note • This projector may not be able to display images from notebook computers in simultaneous (CRT/LCD) mode. Should this occur, turn off the LCD display on the notebook computer and output the display data in “CRT only” mode. Details on how to change display modes can be found in your notebook computer’s operation manual. • When this projector receives 640 × 350 VESA format VGA signals, “640 × 400” appears on the screen. • When projecting video images of an interlace video signal with the projector, the intended image may not be projected depending on the video signal when using the RBG input. In such cases, use the component input, S-video input or video input.
Appendix 61 Video Compatibility Chart 1. Component 1/2 support signal formats are Y/Pb/Pr, Y/Cb/Cr 2. VGA port support signal formats are RGsyncB, RGBHV or RGBCsysc 3. “U” means manual setting is needed DTV IR Remote Key Discrete Codes ResolutionH-Freq (kHz)V-Freq (Hz)Comp1 SupportComp2 SupportS-Video SupportCompos- ite SupportVGA SupportDVI Support SD Video NTSC 640x480i 15.73 59.94/603333 PAL 768x576i 15.63 503333 SECAM 768x576i 15.63 503333 NTSC-4.43UUUU PA L - MUUUU PA L - NUUUU NTSC-JUUUU PAL-60UUUU NTSC-50 ED TV 480P 720x480P 31.5 59.94/6033 33 576P 720x576P 31.3 5033 33 HD TV 1080i/50 1920x1080i 33.8 5033 33 1080i/60 1920x1080i 28.1 59.94/6033 33 720P/50 1280x720P 37.5 5033 33 720P/60 1280x720P 45.0 59.94/6033 33 HTPC 720P/48 1280x720P 48 720P/75 1280x720P 75 SignalHorizontal Frequency (kHz)Vertical Frequency (Hz)DVI Support 480P 31.5 603 576P 31.3 503 720P 45.0 603 720P 37.5 503 1080I 33.8 603 1080I 28.1 503 KeyCodeKeyCode IR POWER 0x00 IR_Aspect 0x0c IR MENU 0x01 IR_PowerOff 0x0d IR UP 0x02 IR_Standard 0x0e IR DOWN 0x03 IR_Letterbox 0x0f IR LEFT 0x04 IR_Anamorphic 0x10 IR RIGHT 0x05 IR_PixelToPixel 0x11 IR ENTER 0x06 IR_S_Video 0x12 IR_Exit 0x07 IR_Composite 0x13 IR_Source1 0x08 IR_Component1 0x14 IR_Source2 0x09 IR_Component2 0x15 IR_Source3 0x0a IR_DVI 0x16 IR_Source4 0x0b IR_PC 0x17
62 Appendix Troubleshooting Problem Check Projector does not startProjector power cord is not plugged into the wall outlet. Remote control batteries have run out. No pictureThe selected input mode is wrong. Cables may be incorrectly connected to the rear panel of the projector. Power to the external connected device is off. The video signal format of the video equipment is not set correctly. Color is fadedPicture adjustments are incorrectly set. Picture is blurredFocus is incorrectly set. The projection distance exceeds the focus range. Picture noise appears.(PC input only) Try Auto tune. Adjust the Clock setting. Adjust the Phase” setting. Picture is green on INPUT1 or 2 COMPONENTChange the input signal type of the video equipment.
Appendix 63 Picture is dark or bright and whitishPicture adjustments are incorrectly set. Picture is too bright and whitishPicture adjustments are incorrectly set.
64 Appendix Product Specifications Item Description Model No. HD2+ DLP Front Projector DLP Panel Size 0.8 HD2+ Display method: DMD by Texas Instruments Device method: Digital Light Processing (DLP TM) Display Type DLP Chip, RGB optical shutter method Resolution 1280 x 720 pixels Lens 1-1.25 x zoom lens, F2.36~2.5, f= 24.0~30.1 mm Projection Lamp 250 W / 200 W switchable UHP lamp Input Sources Video VGA YCbCr, YPbPr CVBS (Composite Video) S-Video DVI-D Control RS-232 (For computer) IR Receiver (For remote) Computer Compatibility VGA,SVGA, XGA 2D Lens Shift Ability Up/Down: +115% / -100% Left/Right: ± 15% Brightness 900 ANSI Lumen (Bright Mode) Digital Keystone Correction 2D keystone correction Projection Lens Zoom lens with manual focus and manual zoom adjust Contrast Ratio 4000:1 Uniformity 85% Screen Size 30 ~ 300 inches Throw Ratio (16:9) 1.34:1 ~ 1.68:1 Aspect Ratio 16:9 Native Projection Distance 100 3m Video Enhance 4-Line Y/C separation(2D) DLTi, DCTi Projection Method Front / Rear, Desktop / Ceiling OSD Control Projector keypad IR remote control Video system NTSC 3.58 / NTSC 4.43 / PAL / PAL-M / PAL-N / PAL 60 / SECAM / EDTV480P /EDTV576P/HDTV720P /HDTV1080I Dimensions 342 mm x 320 mm x 144 mm (13.5 x 12.5 x 5.6)(W x L x H) Weight 14 lbs Power Supply 100 ~ 240 V at 50 ~ 60 Hz Power Consumption 370 W (Standby mode < 5W) Operating Temperature 5°C to 35°C Audible Noise 30 dBA (ECO mode) Lamp Warranty 90 days or 500 hours Product Warranty 2 years parts Specifications are subjected to change without notice.
Appendix 65 Dimensions Units: inches (mm) STATUSEXIT INPUTMENU ECO Focus Zoom LENS SHIFT(H)LENS SHIFT(V)ENTER320 mm 121 2inch 341.8 mm 13 7 16inch 144.8 mm511 16inch 125.7 mm4 15 16inch 160.8 mm65 16inch 283.4 mm 113 16inch 85.7 mm33 8inch 216.1 mm8 1 2inch 41.6 mm1 5 8inch 44.2 mm1 3 4inch 208.9 mm81 4inch 253.6 mm10 inch 127.4 mm5 inch 29.9 mm1 3 16inch 179.0 mm71 16inch 125.7 mm4 15 16inch216.1 mm8 1 2inch WARNING Do not disassemble any components except the lamp chassis cover while replacing the lamp. Do not touch ventilation slots, lamp and objects next to them until they have sufficiently cooled down. Never insert any objects through ventilation holes. Do not use this unit near water or in a rainy/moist environment.Made in Taiwan S-VIDEO VIDEO RS-232Pr/Cr Pb/Cb Y Pr/Cr Pb/CbYPCDVI Bottom View Front View Side ViewSide View Top View Rear View