Sony Vpl Ex130 Projector User Manual

21Turning Off the Power
Projecting the Picture
7Adjust the trapezoidal distortion 
( ) of the picture.
 When you adjust the tilt of the projector 
with the adjuster, the V keystone 
adjustment is performed at the same 
time. If you do not want to perform the 
automatic keystone adjustment, set the 
“V Keystone” to “Manual.” (See 
page 35.)
 If you set the “V Keystone” to “Auto,” 
the “V Keystone” correction is 
automatically adjusted. However, it may 
not be perfectly adjusted depending on 
the room...

22Selecting the Menu Language
BConvenient Functions
Selecting the Menu 
Language
You can select one of several languages for 
displaying the menu and other on-screen 
displays. The factory setting is English.
To change the menu language, proceed as 
follows:
1Plug the AC power cord into a wall 
outlet.
2Press the ?/1 key to turn on the 
projector.
3Press the MENU key.
The menu appears.
The menu currently selected is shown as 
a yellow button.
4Press the v or V key to select the 
MENU SETTING menu, then...

23Security Lock
Convenient Functions
The menu changes to the selected 
language.
To clear the menu
Press the MENU key.
The menu disappears automatically if a key 
is not pressed for one minute.
Security Lock
The projector is equipped with a security 
lock function. When you turn the power of 
the projector on, you are required to input 
the previously set password. If you do not 
input the correct password, you will not be 
able to project the picture.
 You will not be able to use the projector if 
you...

24Security Lock
Enter the password on this screen.
3Enter the password again to confirm.
When the following message is 
displayed, the setting for security lock is 
completed.
If “Invalid Password!” is displayed on 
the screen, perform this procedure again 
from step 
1.
4Turn the main power off and 
disconnect the AC power cord.
The security lock is set to on, then it 
becomes effective. The screen used for 
entering the password is displayed when 
the power is turned on the next time. 
Security...

25Other Functions
Convenient Functions
Other Functions
If you will be using a circuit breaker to turn 
the power for the entire system on and off, 
set the direct power on function to “On.” You 
can turn the power on/off without pressing 
the power key on the projector.
If you are leaving the conference room 
immediately, turn the projector off, and then, 
you can unplug the AC power cord.
When you restart the power immediately after 
turning it off using the Off & Go function, the 
power may not come...

26Using a MENU
BAdjustments and Settings Using a Menu
Using a MENU
The projector is equipped with an on-screen 
menu for making various adjustments and 
settings.
Display items
Input signal indicator
Shows the selected input channel.   is 
displayed when no signal is input. You can 
hide this indicator using “Status” on the 
MENU SETTING menu.
Input signal setting indicator
For Input-A: Shows “Auto” or “Input-A 
Signal Sel.” setting on the SET 
SETTING menu.
For Video/S-Video input: Shows “Auto” or 
the...

27Using a MENU
Adjustments and Settings Using a Menu
To clear the menu
Press the MENU key. 
The menu disappears automatically if a key 
is not pressed for one minute.
To reset items that have been 
adjusted
Select the item that you want to reset, and 
then press the RESET key on the Remote 
Commander. 
“Complete!” appears on the screen and the 
setting of the item that you have selected is 
reset to its factory preset value.
Items that can be reset are: 
 “Contrast,” “Brightness,” “Color,” “Hue” 
and...

28The PICTURE SETTING Menu
The PICTURE SETTING Menu
The PICTURE SETTING menu is used for adjusting the picture or volume.
Items that can be adjusted or set depend on the kind of input signals.
For details, see “Input signals and adjustable/setting items” on page 38.
Picture Mode  Standard
Adjust Picture...
Volume: 30
PICTURE SETTINGInput APICTURE SETTING
Contrast: 80
Brightness: 50
Gamma Mode:  Graphics
Color Temp.:  HighADJUST PICTURE               StandardInput-A
Setting items Functions Initial...

29The PICTURE SETTING Menu
Adjustments and Settings Using a Menu
Color Temp. Adjusts the color temperature.
High: Makes white colors bluish.
Middle: Makes white part of the picture natural 
white. 
Low: Makes white colors reddish.Set according to 
the input signal
DDE (Dynamic 
Detail 
Enhancer)Selects the mode to play the input video signal 
according to the material.
Off: Plays back the interlace format without 
conversion.
Progressive: Plays back the video picture of the 
interlace format converting...

30The INPUT SETTING Menu
The INPUT SETTING Menu
The INPUT SETTING menu is used to adjust the input signal.
When the signal is input from a computer
Setting items Functions Initial setting
Adjust Signal...
Dot Phase Adjusts the dot phase of the LCD panel and the signal 
output from a computer. 
Adjust the picture further for finer picture after the 
picture is adjusted by pressing the APA key.Set according to 
the input signal
H Size Adjusts the horizontal size of a picture output from a 
computer.
Higher...