Sony Vpl Cx5 Projector User Manual

31 GBThe INPUT SETTING Menu
Adjustments and Settings Using the Menu
The INPUT SETTING 
Menu
The INPUT SETTING menu is used to 
adjust the input signal. 
Items that cannot be adjusted depending on 
the input signal are not displayed in the 
menu.
For details on the unadjustable items, see 
page 45.
When the video signal is input
When the RGB signal is input
“Dot Phase,” “H Size” and “Shift” are 
displayed in a sub menu under “Adjust 
Signal... .”
Dot Phase
Adjusts the dot phase of the LCD panel and 
the...

GB 32The SET SETTING Menu
This projector has 38 types of preset data for 
input signals (the preset memory). When a 
preset signal is input, the projector 
automatically detects the signal type and 
recalls the data for the signal from the preset 
memory to adjust it to an optimum picture. 
The memory number and signal type of that 
signal are displayed in the INFORMATION 
menu (See page 35). You can also adjust the 
preset data through the INPUT SETTING 
menu.
This projector has 20 types of user...

33 GBThe MENU SETTING Menu
Adjustments and Settings Using the Menu
indicates the input channel when the power 
is turned on or the INPUT key is pressed.
Input-A Signal Sel.
Selects the computer, component or video 
GBR signal input from the INPUT A 
connector.
If the setting is not correct,  the color of the 
picture becomes strange or “Please check 
INPUT-A setting.” appears on the screen and 
the picture is not displayed.
Color System
Selects the color system of the input signal.
If you select “Auto,”...

GB 34The INSTALL SETTING Menu
The INSTALL 
SETTING Menu
The INSTALL SETTING menu is used for 
changing the settings of the projector.
Tilt...
Adjusts the position (height) of the projected 
picture.  Pressing the f on the TILT 
adjustment key or M/, key on the Remote 
Commander, the more the projector tilts and 
the higher the position of the picture. 
Pressing the F on the TILT adjustment key 
or m/< key on the Remote Commander,  
the less the projector tilts and the lower the 
position of the picture....

35 GBThe INFORMATION Menu
Adjustments and Settings Using the Menu
The INFORMATION 
Menu
The INFORMATION menu displays the 
horizontal and vertical frequencies of the 
input signal and the used time of the lamp.
fH
Displays the horizontal frequency of the 
input signal.
The displayed value is approximate.
fV
Displays the vertical frequency of the input 
signal.
The displayed value is approximate.
Lamp Timer
Indicates how long the lamp has been turned 
on.
These only display on the screen. You cannot...

GB 36Maintenance
BMaintenance
Maintenance
Replace the lamp with a new one in the 
following case.
 When the lamp has burnt out or dims
  “Please replace the LAMP.” appears on 
the screen
 The LAMP/COVER indicator lights up
The lamp life varies depending on 
conditions of use.  Use LMP-C150 Projector 
Lamp as the replacement lamp.
When replacing the lamp after using 
the projector
Turn off the projector, then unplug the 
power cord.
Wait for at least an hour for the lamp to cool.
The lamp becomes a...

37 GBMaintenance
Maintenance
4Insert the new lamp all the way in until 
it is securely in place. Tighten the 
screws.  Fold the handle. 
 Be careful not to touch the glass surface 
of the lamp.
 The power will not turn on if the lamp is 
not secured properly.
5Close the lamp cover and tighten the 
screws.
6Turn the projector back over.
7Connect the power cord and turn the 
projector to standby mode.
8Press the following keys on the remote 
commander in the following order for 
less than five seconds...

GB 38Maintenance
4Remove the air filter.
5Wash the air filter with a mild 
detergent solution and dry it in a 
shaded place.
6Attach the air filter and replace the 
cover. 
 If you neglect to clean the air filter, dust 
may accumulate, clogging it. As a result, 
the temperature may rise inside the unit, 
leading to a possible malfunction or fire.
 If the dust cannot be removed from the air 
filter, replace the air filter with the supplied 
new one.
 Be sure to attach the air filter cover firmly; 
the...

39 GBTroubleshooting
Maintenance
 Troubleshooting
If the projector appears to be operating erratically, try to diagnose and correct the problem 
using the following instructions. If the problem persists, consult with qualified Sony personnel.
Power
Picture
Symptom Cause and Remedy
The power is not turned on.  The power has been turned off and on with the I / 1 key at a short 
interval.
cWait for about 90 seconds before turning on the power 
(see page 26).
 The lamp cover is detached.
cClose the lamp...

GB 40Troubleshooting
Sound
“Please check INPUT-A 
setting.” appears in spite of 
inputting the correct signal 
from INPUT A. Setting of “Input-A Signal Sel.” in the SET SETTING menu is 
incorrect.
cSelect “Computer,” “Video GBR” or “Component” correctly 
according to the input signal (see page 33).
On-screen display does not 
appear. “Status” in the SET SETTING menu has been set to “Off.”
cSet “Status” in the SET SETTING menu to “On” (see page 32).
Color balance is incorrect.  Picture has not been...