Sony STRDH550 User Manual

							MULTI CHANNEL AV RECEIVER
STR-DH750/STR-DH550
Rear panel (STR-DH750)
1 .  HDMI IN/OUT  (*)  jacks
2 .  AM ANTENNA terminal
3 .  FM  ANTENNA terminal
4 .  SPEAKERS  terminals
5 .  SUBWOOFER OUT jacks
6 .  AUDIO  IN jacks
7 .  VIDEO IN/OUT  (*)  jacks
8 .  COAXIAL IN jack
9 .  OPTICAL IN jacks
* You  must  connect your  TV to MONITOR OUT to watch images from the  selected input.
Notes on use
4 -488 -933 -11(1)
Copyright  2014 Sony  Corporation
Help Guide
144  
						

							MULTI CHANNEL AV RECEIVER
STR-DH750/STR-DH550
Rear panel (STR-DH550)
1 .  HDMI IN/OUT  (*)  jacks
2 .  AM ANTENNA terminal
3 .  FM  ANTENNA terminal
4 .  SPEAKERS  terminals
5 .  SUBWOOFER OUT jacks
6 .  AUDIO  IN jacks
7 .  VIDEO IN/OUT  (*)  jacks
8 .  COAXIAL IN jack
9 .  OPTICAL IN jacks
* You  must  connect your  TV to MONITOR OUT to watch images from the  selected input.
Notes on use
4 -488 -933 -11(1)
Copyright  2014 Sony  Corporation
Help Guide
145  
						

							MULTI CHANNEL AV RECEIVER
STR-DH750/STR-DH550
Indicators  on the display panel
1 .  USB
Lights up when an iPhone/iPod or USB device is  detected.
2 .  Input  indicator
Lights up to indicate  the current input.
HDMI
The  receiver recognizes devices connected via an HDMI IN jack.
ARC
TV input is  selected  and Audio Return  Channel  (ARC) signals are  detected.
COAX
Digital signals are  input through the COAXIAL  jack.
OPT
Digital signals are  input through the OPTICAL  jack.
3 .  D.R.C.
Lights up when dynamic  range compression is  activated.
4 .  Dolby Digital Surround indicator  (*1)
The  applicable  indicator lights up when the receiver is  decoding the corresponding Dolby Digital format
signals.
  TrueHD : Dolby TrueHD
5 .  Dolby Pro Logic indicator
The  applicable  indicator lights up when the receiver performs  Dolby Pro Logic processing (Dolby Pro
Logic).  This matrix  surround  decoding technology can enhance input signals.
6 .  EQ
Lights up when the equalizer is  activated.
7 .  DTS(-HD) indicator  (*1)
The  applicable  indicator lights up when the receiver is  decoding the corresponding DTS format signals.
DTS-HD : DTS-HD
8 .  ST
Lights up when the receiver tunes  to a stereo broadcast.
9 .  D.C.A.C.
Lights up when the measurement results  of the Auto Calibration function  are  applied.
10 . SLEEP
Help Guide
146  
						

							Lights up when the sleep timer  is  activated.
11. BT  (*2)
Lights up when a BLUETOOTH device is  connected. Flashes  during pairing.
12 . Speaker system  indicator
*1 When playing  a  Dolby  Digital  or DTS format disc, make sure  that you have  completed the  digital connections, that
[ Input Mode] is not  set  to [ Analog],  and [Analog Direct] is not  selected.
*2 for  STR- DH750 only
Note
The  Dolby Pro Logic indicator (5)  may not light up depending on the speaker pattern setting.
Notes on use
4 -488 -933 -11(1)
Copyright  2014 Sony  Corporation
147  
						

							MULTI CHANNEL AV RECEIVER
STR-DH750/STR-DH550
Remote control
Use the supplied  remote control  to operate this receiver.
1 .  (on/standby) 
Turns the receiver on or sets it to the standby  mode.
Saving  power  in standby mode
Save power  by setting  [Control  for HDMI], [Pass  Through ], and [Bluetooth  Standby] (for STR-DH750 only)
to [ Off].
2 .  Input  buttons  
Select the device you want to use. 
When you press  any of the input buttons, the receiver turns  on. The  input buttons are  pre -assigned  to
automatically control  Sony devices when you select them.
3 .  REPEAT 
Plays  a track or a folder  repeatedly.  
SHUFFLE  
Plays  a track or a folder  in random order.
4 .  A.F.D./2CH , MOVIE , MUSIC  
Select a sound  field.
5 .  AMP  MENU  
Help Guide
148  
						

							Displays the menu  to operate the receiver.
6. , ///
7.  OPTIONS  
Display and select items from the options  menus.
8 .  HOME 
Displays the menu  of the audio/video device that is  currently being  controlled by the remote control.
9 . 
/,  (*),  
Skip,  play, pause,  stop operation.  
PRESET + /–
Select preset stations  or channels.
10 . 
 +  (*)/ -
Adjust the volume  level of all  speakers at the same  time.
11 . SLEEP
12 . iPhone CTRL 
Enter iPhone/iPod control  mode  when using iPhone/iPod.
13 . DISPLAY 
View information  on the display panel.
14 . RETURN 
Returns  to the previous menu  or exits menu  or on-screen  guide  that is  displayed  on the TV screen.
15 . 
 
Turns off the sound  temporarily.  Press the button again  to restore the sound.
* The  and  +  buttons have  tactile dots.  Use  the  tactile dots as a  reference when  operating  the  receiver.
Note
The  above  explanations are  intended to serve  as examples.
Depending on the model  of your  connected device, some  functions  explained in this section may not work
with the supplied  remote control.
Notes on use
4 -488 -933 -11(1)
Copyright  2014 Sony  Corporation
149  
						

							MULTI CHANNEL AV RECEIVER
STR-DH750/STR-DH550
Specifications
POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (USA model  only)
With 6 ohm  loads, both  channels  driven,  from 20 – 20,000 Hz; rated 90 watts per  channel  minimum RMS
power,  with no more than  0.09% total harmonic distortion from 250 milliwatts to rated output.
Amplifier section
Minimum RMS  Output  Power (*1): 90 W  +  90 W  (6 ohms,  20 Hz  – 20 kHz, THD 0.09%)
Stereo  Mode  Output  Power (*1): 105 W  +  105 W  (6 ohms,  1 kHz, THD 1%)
Surround Mode  Output  Power (*1)(*2):  145 W  per  channel  (6 ohms,  1 kHz, THD 0.9%)
*1 Measured under  the  following conditions (Area: Power requirements):
USA and Canadian models: 120 V AC, 60 Hz
European and Australian model:  230 V AC, 50 Hz
*2 Reference power output  for  front, center, surround, surround  back (for STR- DH750 only)  and front  high (for STR-
DH750 only)  speakers. Depending on the  sound field settings and the  source, there may be no sound output.
Frequency response
Analog:
10 Hz  – 100 kHz, +0.5/–2  dB  (with sound  field and equalizer bypassed)
Input
Analog:
Sensitivity: 500 mV/50 kilohms
S/N (*3): 105 dB  (A, 500 mV (*4))
Digital (Coaxial):
Impedance:  75 ohms
S/N:  100 dB  (A, 20 kHz  LPF)
Digital (Optical):
S/N:  100 dB  (A, 20 kHz  LPF)
Output  (Analog)
SUBWOOFER:
Voltage: 2 V/1  kilohm
Equalizer
Gain  levels:
Help Guide
150  
						

							±10  dB,  1 dB  step
*3 INPUT SHORT (with sound field and equalizer bypassed).
*4 Weighted network,  input  level.
FM tuner section
Tuning range: 87.5  MHz – 108.0  MHz
Antenna  (aerial): FM  wire antenna (aerial)
Antenna  (aerial) terminals: 75 ohms,  unbalanced
AM tuner section
Tuning range  (USA  and Canada):
530 kHz  – 1,710  kHz  (Tuning scale: 10 kHz  step)
531 kHz  – 1,710  kHz  (Tuning scale: 9 kHz  step)
Tuning range  (Europe and Australia):
531 kHz  – 1,602  kHz  (Tuning scale: 9 kHz  step)
Antenna  (aerial): Loop  antenna (aerial)
Video section
Inputs/Outputs
Video:
1 Vp -p, 75 ohms
HDMI Video
Input/Output (HDMI Repeater  block)
4096  ×  2160p @ 59.94/60 Hz:
2D (*1)
4096  ×  2160p @ 50 Hz:
2D (*1)
3840  ×  2160p @ 59.94/60 Hz:
2D (*1)
3840  ×  2160p @ 50 Hz:
2D (*1)
4096  ×  2160p @ 23.98/24 Hz:
2D (*2)
3840  ×  2160p @ 29.97/30 Hz:
2D (*2)
3840  ×  2160p @ 25 Hz:
2D (*2)
3840  ×  2160p @ 23.98/24 Hz:
2D (*2)
1920  ×  1080p @ 59.94/60 Hz:
151  
						

							2D
3D: Side -by-Side  (Half)
3D: Over-Under  (Top-and-Bottom)
1920  ×  1080p @ 50 Hz:
2D
3D: Side -by-Side  (Half)
3D: Over-Under  (Top-and-Bottom)
1920  ×  1080p @ 29.97/30 Hz:
2D (*3)
3D: Frame packing
3D: Side -by-Side  (Half)  (*3)
3D: Over-Under  (Top-and-Bottom)  (*3)
1920  ×  1080p @ 25 Hz:
2D (*3)
3D: Frame packing
3D: Side -by-Side  (Half)  (*3)
3D: Over-Under  (Top-and-Bottom)  (*3)
1920  ×  1080p @ 23.98/24 Hz:
2D (*3)
3D: Frame packing
3D: Side -by-Side  (Half)  (*3)
3D: Over-Under  (Top-and-Bottom)  (*3)
1920  ×  1080i  @ 59.94/60 Hz:
2D (*3)
3D: Frame packing
3D: Side -by-Side  (Half)  (*3)
3D: Over-Under  (Top-and-Bottom)  (*3)
1920  ×  1080i  @ 50 Hz:
2D (*3)
3D: Frame packing
3D: Side -by-Side  (Half)  (*3)
3D: Over-Under  (Top-and-Bottom)  (*3)
1280  ×  720p @ 59.94/60 Hz:
2D (*3)
3D: Frame packing
3D: Side -by-Side  (Half)  (*3)
3D: Over-Under  (Top-and-Bottom)  (*3)
1280  ×  720p @ 50 Hz:
2D (*3)
3D: Frame packing
3D: Side -by-Side  (Half)  (*3)
3D: Over-Under  (Top-and-Bottom)  (*3)
152  
						

							1280  ×  720p @ 29.97/30 Hz:
2D (*3)
3D: Frame packing
3D: Side -by-Side  (Half)  (*3)
3D: Over-Under  (Top-and-Bottom)  (*3)
1280  ×  720p @ 23.98/24 Hz:
2D (*3)
3D: Frame packing
3D: Side -by-Side  (Half)  (*3)
3D: Over-Under  (Top-and-Bottom)  (*3)
720 ×  480p @ 59.94/60 Hz:
2D (*3)
720 ×  576p @ 50 Hz:
2D (*3)
640 ×  480p @ 59.94/60 Hz:
2D (*3)
*1 Supports  YUV 4:2:0 / 8  bit format only.
*2 Supports  8  bit format only.
*3 These  formats  are also supported by MHL connection.
MHL section
Supported MHL version:  Incorporates MHL 2
Maximum current: 900 mA
iPhone/iPod section
DC  5V  1.0 A MAX
USB works with iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, iPhone 4, iPhone 3GS, iPhone 3G, iPod  touch
(2nd  through 5th generation), iPod  classic, and iPod  nano  (3rd through 7th generation).
BLUETOOTH technology works with iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, iPhone 4, iPhone 3GS, and
iPod  touch  (4th  and 5th generation) (*).
You can use “SongPal”  app with this receiver via BLUETOOTH (*).
* For STR- DH750 only
BLUETOOTH section (for STR-DH750 only)
Communication  system:  BLUETOOTH Specification version  3.0
Output: BLUETOOTH Specification Power Class  2
Maximum communication  range: Line of sight approx. 10 m (33  feet)  (*1)
Frequency  band:  2.4 GHz band  (2.4000 GHz – 2.4835 GHz)
Modulation method: FHSS (Freq Hopping  Spread  Spectrum)
Compatible BLUETOOTH profiles  (*2): A2DP (Advanced Audio Distribution  Profile),  AVRCP  1.3 (Audio Video
Remote  Control  Profile)
Supported Codecs (*3): SBC (*4), AAC, aptX
Transmission  range (A2DP): 20 Hz  – 20,000 Hz  (Sampling  frequency 44.1  kHz)
*1 The actual range  will  vary depending on factors  such as obstacles between  devices, magnetic fields  around a
153