Sony Projector Vpl Vw60 User Manual

71 
Others
Attaching the PSS-H10 projector suspension support
For details on installation on a ceiling, refer to the Installation manual for Dealers of the 
PSS-H10. Make sure to consult with a qualified Sony personnel for installation.
The installation measurements are shown below when installing the projector on a ceiling 
using the PSS-H10.
Top view
Install the projector so that the center of the lens is parallel to the center of the screen.
130 (5 1/8) 191.3 (7 5/8)
236.3 (9 
3/8)
Front of the...

 72
Front view
Side view
197.5 (7 7/8) 197.5 (7 7/8) 75 (3)150 (6)
175 (7)
93.5 (3 
3/4)
395 (15 5/8)
Ceiling
The bottom 
surface of the 
mount bracket Center of the 
supporting pole
Center of the lens
Center of the lens
Front of the cabinet
191.3 (7 5/8)130 (5 1/8)
236.3 (9 
3/8) 235.1 (9 3/8)
471.4 (18 
5/8) 

73 
Others
Making Fine Adjustments to the Horizontal 
Picture Position
Tools you need to get started
Phillips screwdriver: 110 mm (4 3/8 inches) or longer
Flat-head screwdriver: 110 mm (4 3/8 inches) or longer
For details on how to make fine adjustments of the horizontal picture position, consult with qualified 
personnel. When the lens is scratched, there is a charge for repair.
Also, do not look into the lens while you are adjusting the picture position.
You can adjust the lens position right or left...

 74
3Insert a flat-blade screwdriver into the lens adjustment groove located at 
the left bottom (when the projector projects the image when placed on 
the floor, on a desk, etc.), and turn it in the direction in which you want 
to move the lens.
If you turn it to the left, the lens moves to the left, and if you turn it to the right, the 
lens moves to the right. (The range of movement is approximately ± 1mm.)
When using the 16:9 screenUnit: mm
Image 
projection 
size (inch)40 60 80 100 120 150 180 200...

75 
Others
4After you have decided the lens position, insert the Philips screwdriver 
at the locations of the four screws around the border of the lens in turn 
and tighten them to fix the lens in place.
5Attach the ring (washer) by turning it clockwise. 
When you use the horizontal and vertical lens shift features at the same time and adjust the horizontal 
lens shift to the maximum, the picture moves up to a maximum of 53% of its original position.
Note 

 76
Index
A
Adjust Signal
Phase ................................................... 45
Pitch ..................................................... 45
Shift ..................................................... 45
Adjuster ................................................... 24
Adjusting
picture position  .................................... 21
picture quality ...................................... 32
Advanced Iris  .................................... 32, 41
Auto Input Search...

77 
Others
R
RCP ......................................................... 43
Remote control
inserting the batteries ........................... 11
location of controls  .............................. 10
Reset
resettable items  .................................... 39
resetting the items  ................................ 39
S
Screen Area  ............................................. 45
Selecting the menu language ................... 25
Sharpness ................................................. 41...

S
ony CorporationPrinted in Japan
Printed on 70% or more recycled paper.
Standby power consumption 0.5 W
Halogenated flame retardants are not used in cabinets and printed wiring boards.