Sony Projector Vpl Vw60 User Manual

D:\job\3218492111\3218492111VPLVW60UC\010GB_VPLVW60UC\0
5PRE.fmmasterpage:Left
21 
Connections and Preparations
VPL-VW60
3-218-492- 11 
(1)
Step 3: Adjusting the Picture Position
Project an image on the screen and then adjust the picture position.
Tip
The 
?/1 (ON/STANDBY), INPUT, LENS, MENU, and  M/m /< /, /  (joystick) buttons on the 
side panel of the projector function the same as those on the remote control.
Depending on the installation location of the projector, you may not control it with the...

 22
Tips
 You can select the desired language for the menu screen. For details, refer to “Step 4: Selecting 
the Menu Language”. (1 page 25)
 When “Auto Input Search” is set to “On” in the Function   menu, the input terminal with 
effective signals is automatically displayed by pressing INPUT. (1 page 48)
2Press the ?/1 (ON/STANDBY) 
switch to turn on the projector.
The ON/STANDBY indicator flashes 
in green, and then lights in green.
When the ON/STANDBY indicator 
flashes, “Starting...” appears on the...

23 
Connections and Preparations
Tip
When “Lens Control” is set to “Off” on the Installation 
 menu, you cannot adjust the vertical 
picture position. (1 page 50)
When “Test Pattern” is set to “Off” on the Function   menu, the test pattern is not displayed.
 (1 page 49)
The picture moves up by a maximum of 65% of the screen size from the center of the lens.
Tip
You can also adjust the horizontal position of the lens. For detailed information, see “Making Fine 
Adjustments to the Horizontal Picture...

 24
Tip
When “Lens Control” is set to “Off” on the Installation 
 menu, you cannot adjust the picture size 
and the focus. (1 page 50)
When “Test Pattern” is set to “Off” on the Function   menu, the test pattern is not displayed. 
(1 page 49)
To adjust the tilt of the installation surface
If the projector is installed on an uneven surface, use the adjusters to keep the projector 
level.
Be careful not to catch your finger when turning the adjusters.
7Adjust the focus.
Press the LENS button repeatedly...

25 
Connections and Preparations
Step 4: Selecting the Menu Language
You can select one of 16 languages for displaying the menu and other on-screen displays. 
The factory default setting is English. To change the current menu language, set the 
desired language with the menu screen.
1Press MENU.
The menu appears.
1 2,3,4 

 26
2Press M/m to select the Setup 
 menu, and press , or  .
The setting items of the selected menu 
appears.
3Press M/m to select “Language,” 
and press , or  .
4Press M/m/

27 
Projecting
This section describes how to operate the projector to view the picture from the equipment 
connected to the projector. It also describes how to adjust the quality of the picture to suit 
your taste.
Projecting the Picture on the Screen
* Set the “Input-A Signal Sel.” setting in the Setup   menu according to the signal input. When 
you set it to “Auto,” and cannot display the picture properly, select an appropriate signal 
according to the input signal. (1 page 47, 52)
** The color...

 28
Tips
• When “Auto Input Search” is set to “On” in the Function   menu, the input terminal with effective signals is automatically displayed by pressing INPUT.
 When the “HDMI Control” is set to “On” in the Function   menu, the input terminal with  effective signals is automatically displayed, synchronizing with the operation of the equipment 
connected to HDMI 1 or HDMI 2 input of the projector. 
1Press the ?/1 (ON/STANDBY) switch.
A message “POWER OFF?” appears on the screen.
2Press the ?/1...

29 
Projecting
Selecting the Wide Screen Mode
You can enjoy various wide screen modes according to the video signal received. 
Press WIDE MODE.
Each time you press the button, you can 
select the “Wide Mode” setting.
You can also select it using the menu. 
(1 page 44)
Wide Zoom
A 4:3 aspect ratio picture is enlarged over 
the entire screen properly. The upper and 
lower portions of the screen are slightly 
cut off.
Normal
A picture with normal 4:3 aspect ratio is 
displayed in the center of the screen to...

 30
You can adjust the vertical position of the picture with “V Center” and “Vertical Size” in the Screen 
 menu only when “Zoom” is selected. (1 page 45)
Notes on selecting the wide screen mode
The projector is featured with the WIDE MODE. When changing the settings of WIDE 
MODE, use caution as described below.
 Select the wide screen mode taking into account that changing the aspect ratio of the 
original picture will provide a different look from that of the original image.
 Note that if the...