Sony Projector Vpl Vw60 User Manual

41 
Using the Menus
Cinema Black ProAdvanced Iris
Switches the iris function during projection.
Auto1: Automatically switches to an optimum iris according to a 
projected scene. The contrast of the scene is emphasized most.
Auto2: An optimum iris becomes smaller than when set to “Auto1”. The 
contrast of the scene becomes reduced.
Sensitivity: If “Auto1” or “Auto2” is selected, either “Recommend”, 
“Fast”, or “Slow” can be selected according to the desired response 
speed with Sensitivity Mode.
Manual:...

 42
Expert Setting NR (Noise Reduction)
Reduces the roughness or noise of the picture.
Usually, select “Off”.
If the picture is rough or noisy, select a setting from among “Low”, 
“Middle” or “High” according to the input signal source.
DDE (Dynamic Detail Enhancer)
According to the film source you have selected, make a setting for 
playback.
Film: Normally, select this option. Reproduces the 2-3 Pull-Down film 
sources with smooth picture movement. When the video signal with a 
format other than the 2-3...

43 
Using the Menus
Advanced Picture Menu
The Advanced Picture is used for adjusting the picture more.
RCP (Real Color 
Processing)You can adjust the color and hue of each selected portion of the 
picture independently.
User1, User2, User3: You can adjust the picture using Real Color 
Processing and store the settings. Once the settings are stored, you can 
view the picture with the adjusted picture quality.
Off: Cancels this feature.
For details, see “Adjusting the Picture Using Real Color Processing”....

 44
Screen Menu
The Screen menu is used to adjust the input signal. You can adjust the size of the picture, 
and select wide screen mode, etc.
.
Wide Mode 
(Video signal)You can set the aspect ratio of the picture to be displayed for the 
current input signal. This item is enabled only when a video signal 
(preset memory numbers 1 to 14) (1 page 64, 65) is input.
Wide Zoom: A 4:3 aspect ratio picture is enlarged over the entire screen 
properly. The upper and lower portions of the screen are slightly cut...

45 
Using the Menus
Screen AreaSelects the size of the picture when a Hi-Vision picture is 
overscanned.
Full: Expands the picture on the whole of the screen.
Through: Does not expands the picture on the whole of the screen.
This item is effective only when a Hi-Vision signal (preset memory No. 
7, 8, 9, 12, 13 and 14) is input and “On” is selected in “Over Scan”.
V CenterAdjust the whole picture by moving up and down on the screen.
As the selected number increases, the screen moves up, and as the...

 46
Setup Menu
The Setup menu is used to change the factory preset settings, etc.
StatusSets whether or not the on-screen display is displayed.
Set to “Off” to turn off the on-screen displays except for the menus, 
message when turning off the power, and warning messages.
LanguageSelects the language used in the menu and on-screen displays. 
Available languages are: English, Dutch, French, Italian, German, 
Spanish, Portuguese, Russian, Swedish, Norwegian, Japanese, 
Chinese (Simplified Chinese), Chinese...

47 
Using the Menus
Input-A Signal Sel.Selects the type of signal input from the equipment connected to 
the INPUT A connector.
Selects the type of signal input from the equipment by selecting 
“Input-A” with the INPUT button.
Au to : Selects the input signal type automatically.
Computer: Inputs the signal from a computer.
Video GBR: Inputs the signal from a TV game or HDTV broadcast.
Component: Inputs the component signal from a DVD player/
recorder, Blu-ray Disc player, digital tuner, etc.
When the...

 48
D:\job\3218492111\3218492111VPLVW60UC\010GB_VPLVW60UC\0
7MEN.fmmasterpage:Left
VPL-VW60
3-218-492- 11 
(1)
Function Menu
The Function menu is used for changing the settings of the various functions of the 
projector.
 
HDMI Control Selects the function whether to turn the HDMI Control function 
effective, when the HDMI 1 INPUT and HDMI 2 INPUT 
connectors are connected to an HDMI control compatible 
equipment.
HDMI Control: When set to “On”, the HDMI Control function is 
turned effective and the...

49 
Using the Menus
Te s t  P a t t e r nDisplays the test pattern.
When set to “On,” a test pattern appears on the screen to be used 
when adjusting the lens with “Lens Focus,” “Lens Zoom,” and “Lens 
Shift,” or correcting the screen proportions with “V Keystone.” A 
test pattern does not appear when this item is set to “Off.”
Tip
While the test pattern is displayed, it is only displayed in green to 
allow you to adjust the focus easily.
BackgroundSelects the background color of the screen when no...

 50
Installation Menu
The Installation menu is used for changing the installation settings.
V KeystoneCorrects the vertical trapezoidal distortion of the picture.
When the bottom of the trapezoid is longer than the top ( ): 
Sets a lower value (– direction) 
When the top of the trapezoid is longer than the bottom ( ): 
Sets a higher value (+ direction).
Depending on the picture position adjusted with the lens shift 
feature, the aspect ratio of the picture may change from the original 
or picture...