Sony Projector Vpl Px20 User Manual
Here you can view all the pages of manual Sony Projector Vpl Px20 User Manual. The Sony manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 21
21 (GB) Effective tools for your presentation To enlarge the image (Digital Zoom function) You can select a point in the image to enlarge. 1Press the D ZOOM + key on the Remote Commander. The Digital Zoom icon appears at the center of the image. 2Move the icon to the point on the image you want to enlarge. Use the arrow keys (M/m/
Page 22
22 (GB) Using the MENU The projector is equipped with an on-screen menu for making various adjustments and settings. To select the language used in the menu, see page 26 (GB). 1Press the MENU key. The menu display appears. The bar on the icon of the currently selected menu is highlighted in yellow. PICTURE CTRL CONTRAST: 80 BRIGHT: 50 RGB ENHANCER:30GAMMA MODE:GRAPHICS COLOR TEMP: LOWINPUT-A 2Use the M or m key to select a menu, then press the , or ENTER key. The selected menu appears. SET SETTING...
Page 23
23 (GB) To decrease the number, press the m or < key. Press the ENTER key to restore the original screen. ¥ When changing the setting: Press the M or m key to change the setting. Press the ENTER or < key to restore the original screen. CONTRAST Adjusts the picture contrast. The higher the setting, the greater the contrast. The lower the setting, the lower the contrast. BRIGHT Adjusts the picture brightness. The higher the setting, the brighter the picture. The lower the setting, the darker the picture....
Page 24
24 (GB) The INPUT SETTING Menu The INPUT SETTING menu is used to adjust the input signal. Unadjustable items depending on the input signal are not displayed in the menu. Operation 1. Select an item Use the M or m key to select the item, then press the , or ENTER key. 2. Adjust an item ¥ When changing the adjustment level: To increase the number, press the M or , key. To decrease the number, press the m or < key. Press the ENTER key to restore the original screen. ¥ When changing the setting: Press the M...
Page 25
25 (GB) Memory Preset signalfH fV SyncSIZENo.(kHz) (Hz)H 1 Video 60 Hz15.734 59.940 H-neg V-neg 2 Video 50 Hz15.625 50.000 H-neg V-neg 315k RGB/Component 60 Hz 15.734 59.940 S on G/Y 415k RGB/Component 50 Hz 15.625 50.000 or 5HDTV 33.750 60.000Composite sync 6640 ´ 350VGA mode 131.469 70.086 H-pos V-neg 800 7VGA VESA2) 85 Hz37.861 85.080 H-pos V-neg 832 8640 ´ 400PC-98013) Normal24.823 56.416 H-neg V-neg 848 9VGA mode 231.469 70.086 H-neg V-pos 800 10VGA VESA 85 Hz37.861 85.080 H-neg V-pos 832 11640 ´...
Page 26
26 (GB) Since the data is recalled from the preset memory about the following signals, you can use these preset data by adjusting SIZE H. Make fine adjustment by adjusting SHIFT. Signal Memory No. SIZE H Super Mac-2 23 1312 SGI-1 23 1320 Macintosh 19Ó 25 1328 Macintosh 21Ó 28 1456 Sony News 36 1708 PC-9821 36 1600 1280 ´ 1024 WS Sunmicro 37 1664 Note When the aspect ratio of input signal is other than 4:3, a part of the screen is displayed in black. The SET SETTING Menu The SET SETTING menu is used for...
Page 27
27 (GB) POWER SAVING When set to ON, the projector goes into the power saving mode if no signal is input for 10 minutes. SIRCS RECEIVER Selects the remote control detectors (SIRCS receiver) on the front and rear of the projector. FRONT & REAR: Activates both the front and rear detectors. FRONT: Activates the front detector only. REAR: Activates the rear detector only. The INSTALL SETTING Menu The INSTALL SETTING menu is used for changing the settings of the projector. Operation 1. Select an item Use the...
Page 28
28 (GB) a x b c a: Distance between the screen and the center of the lens b: Distance from the floor to the center of the lens c: Distance from the floor to the foot of the projector x: Free Screen size (inches) 40 60 80 100 120 150 180 200 250 300 Minimum1490 2280 3060 3850 4630 5810 6990 7770 9740 11700 a(58 3/4) (89 7/8) (120 1/2) (151 5/8) (182 3/8) (228 7/8) (275 1/4) (306) (383 5/8) (460 3/4) Maximum1820 2780 3740 4700 5660 7100 8540 9500 11900 14300 (71 3/4) (109 1/2) (147 3/8) (185 1/8) (222...
Page 29
29 (GB) a xb Ceiling Installation When installing the projector on the ceiling, use the PSS-610 Projector Suspension Support. a: Distance between the screen and the center of the lens b: Distance between the ceiling and the center of the lens x: Distance between the ceiling and the center of the screen Center of the lens Screen size (inches) 80 100 120 150 180 200 250 300 Minimum3060 3850 4630 5810 6990 7770 9740 11700 a(120 1/2) (151 5/8) (182 3/8) (228 7/8) (275 1/4) (306) (383 5/8) (460 3/4)...
Page 30
30 (GB) Tips for Installation Tips for Installation Unsuitable Installation Do not install the projector in the following situations. These installations may cause malfunction or damage to the projector. Poorly ventilated ¥ Allow adequate air circulation to prevent internal heat build-up. Do not place the unit on surfaces (rugs, blankets, etc.) or near materials (curtains, draperies) that may block the ventilation holes. When the internal heat builds up due to the block-up, the temperature sensor will...