Sony Projector Vpl Hw10 User Manual

61 
Others
7Remove the filter holder. 
8Remove the air filter.
9Attach the new air filter so that it 
fits into the each claws (10 
positions) on the filter holder.
Attach the air filter aligning it with the 
shape of the filter holder.
Also, do not touch the fan after removing 
the air filter that is set deep inside the 
projector.
10 Attach the filter holder.
The projector will not turn on unless the 
filter holder is securely closed.
11Wipe dust off the ventilation 
holes (intake) with a soft cloth....

 62
 Be sure to turn off the projector and unplug 
the power cord before replacing the lamp, 
then check the ON/STANDBY lamp has 
already been turned off.
 The projector will not turn on unless the lamp 
is securely installed in place.
 The projector will not turn on unless the lamp 
cover are securely closed.
 To cancel a message displayed on the screen, 
press either the button on the remote control 
or the one on the control panel on the 
projector.
Cleaning the Air 
Filter
When “Please clean the...

63 
Others
Cleaning and the 
Screen of the 
Projector
Cleaning the lens
The lens surface is especially treated to 
reduce reflection of light.
As incorrect maintenance may impair the 
performance of the projector, take care with 
respect to the following:
 Wipe the lens gently with a soft cloth such 
as a cleaning cloth or glass cleaning cloth.
 Stubborn stains may be removed with a 
soft cloth such as a cleaning cloth or glass 
cleaning cloth lightly dampened with 
water.
 Never use solvent such as...

 64
Specifications
System
Projection system
SXRD panel, 1 lens, projection system
LCD panel
0.61-inch (15.4 mm) 
SXRD panel 6,220,800 pixels 
(2,073,600 pixels × 3)
Lens 1.6 times zoom lens (manual) 
f=18.5 mm to 29.6 mm 
F2.50 to F3.40
Lamp
200 W Ultra High Pressure Lamp 
Projection picture size
40 inches to 300 inches (1,016 mm to 
7,620 mm) (measured diagonally)
Color system
NTSC
3.58/PAL/SECAM/
NTSC4.43/PAL-M/PAL-N/PAL60 
system, switched automatically/
manually (PAL60 system not 
switched manually)...

65 
Others
Supplied accessories
Remote control RM-PJAW15 (1)
Size AA (R6) batteries (2)
AC power cord (1)
Lens cap (1)
Operating Instructions (1)
Design and specifications are subject to change 
without notice.
Optional accessories
Projector Lamp LMP-H201 (for replacement)
Projector Suspension Support PSS-H10 

 66
Warning on power connection
Use a proper power cord for your local power supply.
* Use a rated plug that complies with the regulation of each country/region and the specifications.
The following table shows the signals and video formats which you can project using this 
unit.
When a signal other than the preset signal shown below is input, the picture may not be 
displayed properly.
The United States, 
CanadaContinental 
EuropeUK, Ireland, 
Australia, 
New ZealandJapan China
Plug type YP-3 YP-12A *...

67 
Others
9 1080/24PsF (48i) 1080/24PsF (48i) 
(1920×1080i)27.000 48.000 SonG/Y –
10 720/60p 720/60p 
(1280×720p)45.000 60.000 SonG/Y –
11 720/50p 720/50p 
(1280×720p)37.500 50.000 SonG/Y –
12 1080/60p 1080/60p 
(1920×1080p)67.500 60.000 – –
13 1080/50p 1080/50p 
(1920×1080p)56.260 50.000 – –
14 1080/24p 1080/24p 
(1920×1080p)26.973 23.976 – –
21 640 × 350 VGA-1 
(VGA350)31.469 70.086 H-pos, V-neg 800
22 VESA 85 
(VGA350)37.861 85.080 H-pos, V-neg 832
23 640 × 400 NEC PC98 24.823 56.416 H-neg V-neg 848...

 68
Preset memory numbers for each input signal
Analog signal
Digital signal
* Some digital signals input from computers may be displayed as preset memory number of 
Component or Video GBR signal. 47 1280 × 1024 VESA 60 63.974 60.013 H-pos, V-pos 1696
50 1400 × 1050 SXGA + 65.317 59.978 H-neg, V-pos 1864
55 1280 × 768 1280 × 768/60 47.776 59.870 H-neg, V-pos 1664
56 1280 × 720 1280 × 720/60 44.772 59.855 H-neg, V-pos 1664
Signal Preset memory number
Video signal (VIDEO INPUT and 
S VIDEO INPUT...

69 
Others
The items in the menus available to adjust differ depending on the input signal. The 
following tables indicate them.
The items that cannot be adjusted are not displayed in the menu.
Picture Menu
z
 : Adjustable/can be set
–  : Not adjustable/cannot be set
Input Signals and Adjustable/Setting Items
Item Input signal
Video signal Component 
signalVideo GBR signal Computer 
signal
Advanced Iriszzzz
Lamp Controlzzzz
Contrastzzzz
Brightnesszzzz
Color
z(except for B & W)zz–
Huez 
(NTSC
3.58/...

 70
Screen menu
z : Adjustable/can be set
– : Not adjustable/cannot be set
*
1: The setting can be made only when “x.v.Color” is set to “Off”.
*2: The setting can be made only when “Over Scan” is set to “On” and “Wide Mode” is set to “Full” 
in the Screen   menu. 
*
3: If the input signal is from a computer, the setting cannot be made when the aspect ratio is 16:9 
or wider.
*
4: The setting can be made only when “Zoom” is selected in “Wide Mode”.
*5: The setting can be made only for analog signal.
When...