Sony Projector Vpl Hw10 User Manual

41 
Using the Menus
Picture Menu
The Picture menu is used for adjusting the picture.
These items may not be available, depending on the type of input signal. For details, see 
“Input Signals and Adjustable/Setting Items” (1 page 69).
Note
Picture ModeYou can select the picture viewing mode that best suits the type of 
picture or the environment.
Dynamic: Vivid picture quality that enhances sharpness and contrast of 
the picture.
Sta nd ard : Standard picture quality that emphasizes on naturalness....

 42
Cinema Black ProAdvanced Iris
Switches the iris function during projection.
Auto 1: Automatically switches to an optimum iris according to a 
projected scene. The contrast of the scene is emphasized most.
Auto 2: An optimum iris becomes smaller than when set to “Auto 1”. 
The contrast of the scene becomes reduced.
Sensitivity: If “Auto 1” or “Auto 2” is selected, either “Recommend”, 
“Fast”, or “Slow” can be selected according to the desired response 
speed with Sensitivity Mode.
Manual: Manually...

43 
Using the Menus
Expert Setting NR (Noise Reduction)
Reduces the roughness or noise of the picture.
Usually, select “Off”.
If the picture is rough or noisy, select a setting from among “Low”, 
“Middle” or “High” according to the input signal source.
MPEG NR (MPEG Noise Reduction)
Reduces block noise and mosquito noise, in particular in digital 
signals.
Block NR: Reduces digital noise that appears in mosaic-like pattern.
Mosquito NR: Reduces digital noise that appears near the outline of the...

 44
Advanced Picture Menu
The Advanced Picture is used for adjusting the picture more.
RCP (Real Color 
Processing)You can adjust the color and hue of each selected portion of the 
picture independently.
User 1, User 2, User 3: You can adjust the picture using Real Color 
Processing and store the settings. Once the settings are stored, you can 
view the picture with the adjusted picture quality.
Off: Cancels this feature.
For details, see “Adjusting the Picture Using Real Color Processing”. 
(1 page 34) 

45 
Using the Menus
Screen Menu
The Screen menu is used to adjust the input signal. You can adjust the size of the picture, 
and select wide screen mode, etc.
.
These items may not be available, depending on the type of input signal. For details, see 
“Input Signals and Adjustable/Setting Items” (1 page 69).
Note
Wide Mode 
(Video signal)You can set the aspect ratio of the picture to be displayed for the 
current input signal. (1 page 30) This item is enabled only when a 
video signal (preset memory...

 46
Over ScanHides the outline of the picture.
On: Hides the outline of the input picture. Select this setting when noise 
appears along the edge of the picture.
Off: Projects the whole of the input picture.
Tip
To display the displayable region within the four directions of the screen, 
refer to “Blanking” on the Installation   menu (1 page 50).
Screen AreaSelects the size of the picture when a Hi-Vision picture is 
overscanned.
Full: Expands the picture on the whole of the screen.
Through: Does not...

47 
Using the Menus
Setup Menu
The Setup menu is used to change the factory preset settings, etc.
StatusSets whether or not the on-screen display is displayed.
Set to “Off” to turn off the on-screen displays except for certain 
menus, message when turning off the power, and warning messages.
LanguageSelects the language used in the menu and on-screen displays. 
Available languages are: English, Dutch, French, Italian, German, 
Spanish, Portuguese, Russian, Swedish, Norwegian, Japanese, 
Chinese...

 48
Input-A Signal Sel.Selects the type of signal input from the equipment connected to 
the INPUT A connector.
Selects the type of signal input from the equipment by selecting 
“Input-A” with the INPUT button.
Auto: Selects the input signal type automatically.
Computer: Inputs the signal from a computer.
Video GB R: Inputs the signal from a TV game or HDTV broadcast.
Component: Inputs the component signal from a DVD player/
recorder, Blu-ray Disc player/recorder, digital tuner, etc.
When the input...

49 
Using the Menus
Function Menu
The Function menu is used for changing the settings of the various functions of the 
projector.
 
Control for HDMISelects the function whether to turn the Control for HDMI 
function effective, when the HDMI 1 INPUT and HDMI 2 
INPUT connectors are connected to a Control for HDMI 
compatible equipment.
Control for HDMI: When set to “On”, the Control for HDMI 
function is turned effective and the following settings can be 
assigned.
Device Auto Power Off: When set to on...

 50
Installation Menu
The Installation menu is used for changing the installation settings.
V KeystoneCorrects the vertical trapezoidal distortion of the picture.
When the bottom of the trapezoid is longer than the top ( ): 
Sets a lower value (– direction) 
When the top of the trapezoid is longer than the bottom ( ): 
Sets a higher value (+ direction).
Depending on the picture position adjusted with the lens shift 
feature, the aspect ratio of the picture may change from the original 
or picture...