Sony Projector Vpl Hw10 User Manual

31 
Projecting
You can adjust the vertical position of the picture with “V Center” and “Vertical Size” in the Screen 
 menu only when “Zoom” is selected. (1 page 46)
Notes on selecting the wide screen mode
The projector is featured with the WIDE MODE. When changing the settings of WIDE 
MODE, use caution as described below.
 Select the wide screen mode taking into account that changing the aspect ratio of the 
original picture will provide a different look from that of the original image.
 Note that if...

 32
Selecting the Picture Viewing Mode
You can select the picture viewing mode that best suits the type of program or room 
conditions.
Press one of the 
PICTURE MODE buttons 
(DYNAMIC, STANDARD, 
CINEMA and USER 1, USER 2 
and USER 3).
DYNAMIC
Vivid picture quality that enhances the 
sharpness and contrast of the picture.
STANDARD
Standard picture quality that emphasizes 
on naturalness.
CINEMA
Picture quality suited for watching 
movies.
USER 1, USER 2 and USER 3
You can adjust the quality of the...

33 
Projecting
Adjusting the Picture Quality
You can adjust the picture quality that suits your taste by selecting the adjustment items 
with the remote control. The adjusted data can be stored in each picture mode.
1Press ADJ PIC.
Each time you press the button, the 
following adjustment windows are 
displayed repeatedly in sequence.
“Advanced Iris”, “Lamp Control”, 
“Contrast”, “Brightness”, “Color”, 
“Hue”, “Color Temp.”, “Sharpness”, 
“NR”, “MPEG NR”, “Film Mode”, 
“Black Level Adj.”, “Gamma...

 34
Adjusting the Picture Using Real Color 
Processing
The Real Color Processing (RCP) feature allows you to adjust the color and hue of each 
target of the projected picture you specify independently. You can thus obtain a picture 
more suitable to your taste.
Tip
Freeze the scene of the video source when you are adjusting the picture using Real Color Processing.
1Press RCP on the remote 
control.
2Press M/m to select “User 1,” 
“User 2” or “User 3,” then press 
,.
The RCP (Real Color Processing)...

35 
Projecting
2Press M/m to select “Position” or 
“Range,” and specify it more 
delicate color position and color 
range you want to adjust using 

 36
Using Other Functions
Press PIC MUTING.
Press to temporarily turn off a projected 
picture. To return to the previous screen, 
press PIC MUTING again. 
Press APA.
Press to automatically adjust a picture 
from a computer to a position where it 
looks clear.
Press FREEZE.
Press to pause and display a projected 
picture.  To return to the previous screen, 
press FREEZE again.
APA and FREEZE are available only for 
computer signal.
PIC MUTING 
button
APA button
FREEZE button
Note 

37 
Using the Menus
 
This section describes how to make various adjustments and settings using the menus.
Operation through the Menus
The projector is equipped with an on-screen menu for making various adjustments and 
settings. Some of the adjustable/setting items are displayed in a pop-up menu, in a setting 
menu or adjustment menu with no main menu, or in the next menu window. If you select 
an item name followed by an arrow (
B), the next menu window with setting items appears.
To change the...

 38
1Press MENU.
The menu window appears.
2Press M/m to select a menu item, 
and press , or  .
The items that can be set or adjusted 
with the selected menu appear. The 
item presently selected is shown in 
yellow. 

39 
Using the Menus
3Press M/m to select an item you 
want to set or adjust and press 
, or  .
The setting items are displayed in a 
pop-up menu, in a setting menu, in an 
adjustment menu or in the next menu 
window.
Pop-up menu
Setting items
Next menu window
Setting items
Setting menu
Adjustment menu 

 40
4Make the setting or adjustment 
of an item.
When changing the adjustment 
level
To increase the value, press M/,.
To decrease the value, press m/