Sony Projector Vpl Hs2 User Manual
Here you can view all the pages of manual Sony Projector Vpl Hs2 User Manual. The Sony manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
Others 31 GB Replacing the Lamp Replacing the Lamp The lamp used for the light source has a certain life. When the lamp dims, the color balance of the picture becomes strange, or “Please replace the LAMP.” appears on the screen, the lamp is exhausted. Replace the lamp with a new one (not supplied). Use LMP-H150 Projector Lamp as the replacement lamp. When replacing the lamp after using the projector Turn off the projector, then unplug the power cord. Wait for at least an hour for the lamp to cool...
Page 32
Others GB 32Replacing the Air Filter 6 While pushing the projector cover toward you by holding both sides of the cover on the lens side, close the cover until it clicks. 7 Connect the power cord and set the projector to standby mode. 8 Press the following buttons on the remote control in the following order for less than five seconds each: RESET,
Page 33
Others 33 GB Specifications 4 Insert the new air filter into the filter holder with the white surface up, put the holder face down, then replace it into the projector. 5 Replace the filter cover. 6 While pushing the projector cover toward you by holding both sides of the cover on the lens side, close the cover until it clicks. Specifications System Projection system 3 LCD panels, 1 lens, projection system LCD panel 0.62-inch TFT LCD panel, 1,245,816 pixels (415,272 pixels × 3) Lens 1.2 times zoom...
Page 34
Others GB 34Specifications C (chrominance): burst 0.286 Vp-p±2 dB (NTSC) (75 ohms terminated) burst 0.3 Vp-p±2 dB (PAL) (75 ohms terminated) Analog RGB/component: R/C R (PR): 0.7 Vp-p±2 dB (75 ohms terminated) G: 0.7 Vp-p±2 dB (75 ohms terminated) G with sync/Y: 1 Vp-p±2 dB sync negative (75 ohms terminated) B/C B (PB): 0.7 Vp-p±2 dB (75 ohms terminated) SYNC/HD: Composite sync input: 1–5 Vp-p high impedance, positive/ negative Horizontal sync input: 1–5 Vp-p high impedance,...
Page 35
Others 35 GB Specifications When projecting using “Side Shot” adjustment only For a 1080i/720p format signal and computer’s signal Unit: m (feet) Screen size (inches)40 60 80 100 120 150 a1.6 (5.2)2.5 (8.2)3.3 (10.8)4.1 (13.5)5.0 (16.4)6.2 (20.3) b1.9 (6.2)2.9 (9.5)3.9 (12.7)4.8 (15.7)5.8 (19.0)7.3 (24.0) c0.08 (0.2)0.1 (0.3)0.2 (0.7)0.2 (0.6)0.3 (1.0)0.3 (1.0) d0.2 (0.7)0.3 (1.0)0.4 (1.3)0.5 (1.6)0.6 (2.0)0.8 (2.6)
Page 36
Others GB 36Specifications Projection Distances When Installing the Optional Conversion Lens When using the VPLL-CW20 Short Focused Conversion Lens Use the 40 to 150-inch screens. For 16:9 aspect ratio screens Unit: mm (inches) To calculate the installation measurements (SS: Screen size) a (minimum) = SS × 29.7451 – 48.0584 a (maximum) = SS × 36.30012 – 47.7234 b = x – (SS/4.84269158) c = x – (SS/4.84269158 + 97) SS (inches) 40 60 80 100 120 150 aMinimum1140 (45)1740 (68 5/8)2330 (91 3/4)2930 (115...
Page 37
Others 37 GB Specifications For 4:3 aspect ratio screensUnit: mm (inches) To calculate the installation measurements (SS: Screen size) a (minimum) = SS × 29.7451 – 48.0584 a (maximum) = SS × 36.30012 – 47.7234 b = x – (SS/5.92666667) c = x – (SS/5.92666667 + 97) SS (inches) 40 60 80 100 120 150 aMinimum1410 (55 5/8)2140 (84 3/8)2860 (112 7/8)3590 (141 3/8)4320 (170 1/8)5410 (213 1/8) Maximum1730 (68 1/8)2620 (103 1/4)3510 (138 1/4)4390 (172 7/8)5280 (208)6620 (260 3/4) bx-237 (x-9 3/8)x-356...
Page 38
Others GB 38Specifications Warning on power connection Use a proper power cord for your local power supply. Input signals and adjustable/setting items Some of the items in the menus cannot be adjusted depending on the input signal. The following tables indicate them. The items that cannot be adjusted are not displayed in the menu. Adjust Picture... menu z : Adjustable/can be set – : Not adjustable/cannot be set INPUT SETTING menu z : Adjustable/can be set – : Not adjustable/cannot be set The United...
Page 39
Others 39 GB Specifications Preset Signals Notes When a signal other than the preset signals shown above is input, the picture may not appear properly. Memory No. 22 shows the interlace signal. Memory No. Preset signal fH (kHz) fV (Hz) Sync H size 1 Video 60 Hz 15.734 59.940 –– –– 2 Video 50 Hz 15.625 50.000 –– –– 3 480/60i (DTV) 15.734 59.940 SonG/Y or Composite Sync –– 4 575/50i (DTV) 15.625 50.000 SonG/Y or Composite sync/ Composite video–– 5 1080/60i (DTV), 1035/60i, 1080/60i 33.750 60.000 SonG/Y...
Page 40
Others GB 40Location of Controls Location of Controls Front You can use the buttons on the control panel with the same names as those on the remote control to operate the projector. INPUT LAMP/ COVERTEMP/ FA NPOWER SAVINGON/ STANDBYMENU SIDE SHOT +– LAMP/COVER indicator (1 page 30) Lens Ventilation holes (exhaust) (1 page 7) POWER SAVING indicator (1 page 27) ON/STANDBY indicator (1 page 13)[/1 (on/standby) switch (1 page 13) INPUT button (1 page 13) Adjuster lock lever (1 page 13) Front remote...