Sony Projector Vpl Hs2 User Manual

Connections and 
Preparations
11 GB Step 2: Connecting the Projector
Connecting Using the Optional 
Signal Interface Cables
To connect with a DVD player 
equipped with the component video 
connectors/digital tunerConnecting an AV amplifier
Connecting a Computer
To hear the sound from a computer, use the speakers 
built in the computer or connect the active speakers to 
the computer.
Note
Even if you connect the signal interface cable to the audio output 
on the computer, there is no sound output from the...

Connections and 
Preparations
GB 12Step 3: Adjusting the Picture Size and Position
Connecting Using the 
Optional Interface Unit
Using the optional interface unit allows you to 
connect various video equipment, and to select the 
output to the projector or TV from the connected 
equipment simply by switching the select switch on 
the interface unit.
Step 3: Adjusting 
the Picture Size 
and Position
Tip
The ? /
1 (on/standby), INPUT, MENU, and m/M/

Connections and 
Preparations
13 GB Step 3: Adjusting the Picture Size and Position
1Plug the AC power cord into a 
wall outlet.
The ON/STANDBY indicator lights in red and 
the projector goes into standby mode.
2Press the [/1 (on/standby) 
switch to turn on the projector.
The ON/STANDBY indicator lights in green.
3Turn on the equipment 
connected to the projector.
Refer to the operating instructions of the 
connected equipment.
4Press INPUT to project the 
picture on the screen. 
Each time you press the...

Connections and 
Preparations
GB 14Step 3: Adjusting the Picture Size and Position
Adjusting the picture position using the 
supplied adjuster spacer
Attaching one of the supplied spacers for adjuster 
adjustment (spacers for 1
º and 2°) allows you to tilt 
the projector to the right or left at a tilting angle up to 
2
º.
To attach the supplied adjuster spacer
1Place a thick cloth (e.g., a cushion) beneath the 
projector. Place the projector face down.
2While pressing the lock knobs inward, remove the...

Connections and 
Preparations
15 GB Step 3: Adjusting the Picture Size and Position
When projecting using “Side Shot” 
adjustment only
1Set “V Keystone” in the INSTALL SETTING 
to “Manual,” and set the level to “0” (1 
page 27) or press RESET.
2Adjust so that the left or right side of the 
picture fits that of the screen. 
If you position the projector on the left side of the 
screen, adjust so that the left side of the picture fits 
the left side of the screen. With the projector 
positioned on the...

Connections and 
Preparations
GB 16Step 4: Selecting the Menu Language
Step 4:  
Selecting the 
Menu Language
You can select one of nine languages for displaying 
the menu and other on-screen displays. The factory 
default setting is English.
Tip
You can operate the menu using the joystick on the side panel of 
the projector instead of the M/m/

Connections and 
Preparations
17 GB Step 4: Selecting the Menu Language
5Press M or m to select 
“Language”, and press , or 
ENTER.
6Press M or m to select a 
language, and press < or 
ENTER.
The menu changes to the selected language.
To clear the menu
Press MENU.
ENTER
Input A:
:
:
:
or
ENTERor 

GB 18Projecting the Picture on the Screen
ProjectingProjecting the 
Picture on the 
Screen
1Plug the AC power cord into a 
wall outlet.
The ON/STANDBY indicator lights in red and 
the projector goes into standby mode.
This section describes how to operate the 
projector to view the picture from the 
equipment connected to the projector. It 
also describes how to select the wide 
screen mode or the quality of the picture to 
suit your taste. 
+
–
+
–
INPUT LIGHT
STANDARDCINEMADYNAMIC
USER 2 PICTURE MODE...

19 GB Projecting the Picture on the Screen
Projecting
2Press the [/1 (on/standby) 
switch to turn on the projector.
The ON/STANDBY indicator lights in green.
3Turn on the equipment 
connected to the projector.
Refer to the operating instructions of the 
connected equipment.
4Press INPUT repeatedly to 
select the input you want to 
project on the screen.
Display the indication of the input you want.
Example:To view the picture from the video 
equipment connected to the VIDEO 
INPUT jack.
*Set the “Input-A...

GB 20Selecting the Wide Screen Mode
Projecting
Cutting off the sound
Press MUTING on the remote 
control.
To restore the sound, press MUTING again.
To turn off the power
1 Press the [/1 (on/standby) switch.
A message “POWER OFF?” appears on the 
screen.
2 Press the [/1 switch again.
The ON/STANDBY indicator flashes in green and 
the fan continues to run to reduce the internal heat. 
Also, the ON/STANDBY indicator flashes quickly 
during which you will not be able to light up the 
ON/STANDBY indicator...